Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

NCL30086BHDR2G

onsemi · LED Drivers · SOIC-8

NCL30086BHDR2G from onsemi, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 DIM input Analog / PWM dimming control input. Accepts an analog signal varied between V_DIM0 and V_DIM100, or a PWM signal, to adjust average LED current.
2 ZCD input Zero Crossing Detection input. Connects to the auxiliary transformer winding to detect the core reset (demagnetization) event for quasi-resonant valley switching.
3 VS input Input voltage sensing pin. Monitors the rectified input rail for Power Factor Correction, valley lockout, and brown-out detection. Recommended operating range 0.3-4.0 V; absolute max 5.5 V.
4 COMP passive Power factor correction filtering-capacitor pin. Typical capacitance 1-4.7 µF connected to GND.
5 SD input Thermal foldback and shutdown input. An NTC to GND programs thermal current-foldback threshold and slope; a Zener to this pin implements adjustable OVP shutdown.
6 CS input Current sense input. Monitors the primary MOSFET peak current across an external sense resistor; internal V_ILIM limit is 1.00 V typ with 300 ns leading-edge blanking.
7 GND power_in Controller ground reference pin.
8 DRV output Gate driver output to an external power MOSFET. 300 mA/500 mA totem-pole driver with internal 12 V gate clamp.
9 VCC power_in IC positive supply. Startup at V_CC(on) = 18 V typ (16-20 V), UVLO off at V_CC(off) = 8.8 V typ; operating range after start-up 9.4-26 V (V_CC(OVP) min). Absolute max 30 V.
10 NC unconnected No internal connection. Leave floating or tie to a copper pad for mechanical support.

Key specifications

Parameter Value
Manufacturer onsemi
Package SOIC-8
Category LED Drivers
Pins 10

Ordering variants

Same part, different packaging or reel option.

  • NCL30086BHDR2G

CAD (KiCad official)

  • Symbol: NCL30086BHDR2G
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: ncl30086bhdr2g-etched.step / ncl30086bhdr2g-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ncl30086bhdr2g.step / ncl30086bhdr2g.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: onsemi datasheet (30 pp, sha256 1130b930d06bde30, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF