main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs ncl30086bhdr2g: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers ncl30086bhdr2g: viewers · Ray
ncl30086bhdr2g-etched.fit.json ncl30086bhdr2g: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
ncl30086bhdr2g-etched.glb ncl30086bhdr2g: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
ncl30086bhdr2g-etched.step ncl30086bhdr2g: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
ncl30086bhdr2g.glb Publish 0.1.0 · Ray
ncl30086bhdr2g.kicad_mod Publish 0.1.0 · Ray
ncl30086bhdr2g.kicad_sym Publish 0.1.0 · Ray
ncl30086bhdr2g.lbr Publish 0.1.0 · Ray
ncl30086bhdr2g.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json ncl30086bhdr2g: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
README.md ncl30086bhdr2g: laser-etched CAD + chip hero (factory 2.0.0 backfill) · Ray

NCL30086BHDR2G

onsemi · LED Drivers · SOIC-8

NCL30086BHDR2G from onsemi, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 DIM input Analog / PWM dimming control input. Accepts an analog signal varied between V_DIM0 and V_DIM100, or a PWM signal, to adjust average LED current.
2 ZCD input Zero Crossing Detection input. Connects to the auxiliary transformer winding to detect the core reset (demagnetization) event for quasi-resonant valley switching.
3 VS input Input voltage sensing pin. Monitors the rectified input rail for Power Factor Correction, valley lockout, and brown-out detection. Recommended operating range 0.3-4.0 V; absolute max 5.5 V.
4 COMP passive Power factor correction filtering-capacitor pin. Typical capacitance 1-4.7 µF connected to GND.
5 SD input Thermal foldback and shutdown input. An NTC to GND programs thermal current-foldback threshold and slope; a Zener to this pin implements adjustable OVP shutdown.
6 CS input Current sense input. Monitors the primary MOSFET peak current across an external sense resistor; internal V_ILIM limit is 1.00 V typ with 300 ns leading-edge blanking.
7 GND power_in Controller ground reference pin.
8 DRV output Gate driver output to an external power MOSFET. 300 mA/500 mA totem-pole driver with internal 12 V gate clamp.
9 VCC power_in IC positive supply. Startup at V_CC(on) = 18 V typ (16-20 V), UVLO off at V_CC(off) = 8.8 V typ; operating range after start-up 9.4-26 V (V_CC(OVP) min). Absolute max 30 V.
10 NC unconnected No internal connection. Leave floating or tie to a copper pad for mechanical support.

Key specifications

Parameter Value
Manufacturer onsemi
Package SOIC-8
Category LED Drivers
Pins 10

Ordering variants

Same part, different packaging or reel option.

  • NCL30086BHDR2G

CAD (KiCad official)

  • Symbol: NCL30086BHDR2G
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: ncl30086bhdr2g-etched.step / ncl30086bhdr2g-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ncl30086bhdr2g.step / ncl30086bhdr2g.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: onsemi datasheet (30 pp, sha256 1130b930d06bde30, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF