3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownRE46C194S16
Microchip Tech · Specialized Sensors · SOIC-16
RE46C194S16 from Microchip Tech, in a SOIC-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VSS | power_in | Connects to the negative supply voltage. |
| 2 | IRED | output | Provides a regulated and programmable pulsed current for the infrared emitter diode. |
| 3 | VBAT | power_in | Connects to the positive supply or battery voltage. |
| 4 | TEST | input | Input used to invoke Test modes and the Timer mode, with an internal pull-down. |
| 5 | TEST2 | input | Test input for Test and Programming modes, with an internal pull-down. |
| 6 | IRP | input | Connects to the anode of the photo diode. |
| 7 | IRN | input | Connects to the cathode of the photo diode. |
| 8 | RLED | output | Open-drain NMOS output driving a visible LED; provides load current for the low battery test and is the visual indicator for Alarm and Hush modes. |
| 9 | GLED | output | Open-drain NMOS output driving a visible LED to indicate an Alarm Memory condition. |
| 10 | FEED | bidirectional | Usually connected to the feedback electrode through a current-limiting resistor; if not used it must be connected to VBAT or VSS. |
| 11 | IRCAP | passive | Used to charge and monitor the IRED capacitor. |
| 12 | IO | bidirectional | Bidirectional pin for interconnecting multiple detectors in a single system, with an internal pull-down device and a charge dump device. |
| 13 | HB | output | Connected to the metal electrode of a piezoelectric transducer. |
| 14 | HS | output | Complementary output to HB, connected to the ceramic electrode of the piezoelectric transducer. |
| 15 | VBST | power_out | Boosted voltage produced by the DC-DC converter. |
| 16 | LX | output | Open-drain NMOS output driving the boost converter inductor, which should be connected from this pin to the positive supply through a low-resistance path. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOIC-16 |
| Category | Sensors |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage | VBAT | 2 | 5 | V | Operating | 6 | |
| Supply Current | IBAT1 | 1 | 2 | µA | Standby, inputs low, no loads, boost off, no smoke check | 6 | |
| Boost Voltage 1 | VBST1 | 3.3 | 3.6 | 3.9 | V | IRCAP charging for smoke check, GLED operation, IOUT = 20 mA | 6 |
| Boost Voltage 2 | VBST2 | 8 | 8.5 | 9 | V | No local alarm, RLED operation, IOUT = 20 mA, IO as an input | 6 |
| Boost Voltage 3 | BST3 | 9.4 | 10 | 10.6 | V | No local alarm, RLED operation, IOUT = 20 mA, IO as an input | 6 |
| Input Leakage IRP | IINOPP | -200 | 200 | pA | IRP = VBAT or VSS | 6 | |
| Input Leakage IRN | IINOPN | -200 | 200 | pA | IRN = VBAT or VSS | 6 | |
| FEED input high current | IIHF | 20 | 50 | µA | FEED = 22V, VBST = 9V | 6 | |
| FEED input low current | IILF | -50 | -15 | µA | FEED = -10V, VBST = 10.7V | 6 | |
| Input Voltage Low FEED | VIL1 | 2.7 | V | FEED, VBST = 9V | 6 | ||
| Input Voltage Low IO | VIL2 | 800 | mV | No local alarm, IO as an input | 6 | ||
| Input Voltage High FEED | VIH1 | 6.2 | V | FEED; VBST = 9V | 6 | ||
| Input Voltage High IO | VIH2 | 2 | V | No local alarm, IO as an input | 6 | ||
| Input Pull-Down Current | IPD1 | 3 | 10 | 30 | µA | VIN = VBAT | 6 |
| IO Pull-Down Current 1 | IPDIO1 | 20 | 80 | µA | VIN = VBAT | 6 | |
| IO Pull-Down Current 2 | IPDIO2 | 140 | µA | VIN = 15V | 6 | ||
| Output Voltage Low | VOL1 | 500 | mV | IOL = 16 mA, VBST = 9V | 6 | ||
| Output Voltage Low | VOL2 | 300 | mV | IOL = 10 mA, VBST = 9V | 6 | ||
| Output High Voltage | VOH1 | 8.5 | V | IOL = 16 mA, VBST = 9V | 6 | ||
| IO Output Current High | IIOH1 | -4 | -5 | mA | Alarm, VIO = 3V or VIO = 0V, VBST = 9V | 7 | |
| IO Dump Current | IIODMP | 5 | 15 | mA | At conclusion of local alarm or test, VIO = 1V | 7 | |
| IRED Current 50 mA | IIRED50 | 45 | 50 | 55 | mA | IRED on, VIRED = 1V, VBST = 5V, IRCAP = 5V (50 mA option selected; TA = +25°C) | 7 |
| IRED Current 100 mA | IIRED100 | 90 | 100 | 110 | mA | IRED on, VIRED = 1V, VBST = 5V, IRCAP = 5V (100 mA option selected; TA = +25°C) | 7 |
| IRED Current 150 mA | IIRED150 | 135 | 150 | 165 | mA | IRED on, VIRED = 1V, VBST = 5V, IRCAP = 5V (150 mA option selected; TA = +25°C) | 7 |
| IRED Current 200 mA | IIRED200 | 180 | 200 | 220 | mA | IRED on, VIRED = 1V, VBST = 5V, IRCAP = 5V (200 mA option selected; TA = +25°C) | 7 |
| Low Battery Alarm Voltage 2.1V | VLB1 | 2.05 | 2.1 | 2.15 | V | Falling edge, 2.1V nominal selected | 7 |
| Low Battery Alarm Voltage 2.2V | VLB2 | 2.15 | 2.2 | 2.25 | V | Falling edge, 2.2V nominal selected | 7 |
| Low Battery Alarm Voltage 2.3V | VLB3 | 2.25 | 2.3 | 2.35 | V | Falling edge, 2.3V nominal selected | 7 |
| Low Battery Alarm Voltage 2.4V | VLB4 | 2.35 | 2.4 | 2.45 | V | Falling edge, 2.4V nominal selected | 7 |
| Low Battery Alarm Voltage 2.5V | VLB5 | 2.45 | 2.5 | 2.55 | V | Falling edge, 2.5V nominal selected | 7 |
| Low Battery Alarm Voltage 2.6V | VLB6 | 2.55 | 2.6 | 2.65 | V | Falling edge, 2.6V nominal selected | 7 |
| Low Battery Alarm Voltage 2.7V | VLB7 | 2.65 | 2.7 | 2.75 | V | Falling edge, 2.7V nominal selected | 7 |
| Low Battery Alarm Voltage 2.8V | VLB8 | 2.75 | 2.8 | 2.85 | V | Falling edge, 2.8V nominal selected | 7 |
| IRCAP Turn-On Voltage | VTIR1 | 3.6 | 4 | 4.4 | V | Falling edge, VBST = 5V, IOUT = 20 mA | 7 |
| IRCAP Turn-Off Voltage | VTIR2 | 4 | 4.4 | 4.8 | V | Rising edge, VBST = 5V, IOUT = 20 mA | 7 |
| Internal Clock Period | TPCLK | 9.8 | 10.4 | 11 | ms | PROGSET, IO = High | 8 |
| RLED On Time | TON1 | 9.8 | 10.4 | 11 | ms | Operating | 8 |
| RLED Standby Period | TPLED1 | 320 | 344 | 368 | s | Standby, no alarm | 8 |
| Smoke Check Duration | TPUL | 2.82 | 3 | 3.18 | ms | Standby | 8 |
| Smoke Check Period, Temporal, standby | TPER0 | 10 | 10.7 | 11.4 | s | Standby, no alarm | 8 |
| Chamber Test Period | TPCT1 | 40 | 43 | 46 | s | Standby, no alarm | 9 |
| Long-Term Drift Sample Period | TLTD | 400 | 430 | 460 | s | Standby, no alarm, LTD enabled | 9 |
| Hush Timer Period | TTPER | 480 | 516 | 546 | s | No alarm | 9 |
| IRED On Time (100 µs setting) | TIRON | 100 | µs | Prog bits 38, 39 = 0, 0 | 10 | ||
| IO Active Delay | TIODLY1 | 3.5 | 3.7 | 3.9 | s | From start of local alarm to IO active | 10 |
| IO Charge Dump Duration | TIODMP | 0.475 | 0.5 | 0.525 | s | At conclusion of local alarm or test | 10 |
| Operating Temperature Range | TA | 0 | 60 | °C | 11 | ||
| Storage Temperature Range | TSTG | -55 | 125 | °C | 5 | ||
| Supply Voltage | VDD | 5.5 | V | 5 | |||
| Boost Supply Voltage | VBST | 13 | V | 5 | |||
| FEED Input Voltage Range | VINFD | -10 | 22 | V | 5 | ||
| LX Voltage | VLX | -0.3 | 13 | V | 5 | ||
| IRCAP Voltage | VIRCAP | 5.5 | V | 5 | |||
| Input Current Except FEED Pin | IIN | 10 | mA | 5 | |||
| Continuous Operating Current (HS, HB, VBST) | IO | 20 | mA | 5 | |||
| Continuous Operating Current (IRED) | IOIR | 300 | mA | 5 | |||
| ESD Human Body Model | VHBM | 2 | kV | 5 | |||
| ESD Machine Model | VMM | 150 | V | 5 | |||
| Thermal Resistance, 16L-SOIC (150 mil.) | θJA | 86.1 | °C/W | 11 | |||
| IRED Current Temperature Coefficient | TCIRED | 0.5 | %/°C | VBST = 5V, IRCAP = 5V (Note 4) | 7 |
CAD (KiCad official)
- Symbol:
RE46C194S16 - Footprint:
Package_SO:SOIC-16_3.9x9.9mm_P1.27mm - 3D model: SOIC-16 (KiCad packages3D, STEP)
- 3D model files:
re46c194s16-etched.step/re46c194s16-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);re46c194s16.step/re46c194s16.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (48 pp, sha256
49dec62c5b78402b, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).