main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers re46c194s16: viewers · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
re46c194s16-etched.glb Publish 0.1.0 · Ray
re46c194s16-etched.step re46c194s16: factory component page (tier=mfr) · Ray
re46c194s16-hero.glb re46c194s16: hero GLB from the etched model (keeps the MPN mark) · Ray
re46c194s16-hero.overlay.json Publish 0.1.0 · Ray
re46c194s16.glb Publish 0.1.0 · Ray
re46c194s16.kicad_mod Publish 0.1.0 · Ray
re46c194s16.kicad_sym Publish 0.1.0 · Ray
re46c194s16.lbr Publish 0.1.0 · Ray
re46c194s16.step Publish 0.1.0 · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 16 pins · Ray

RE46C194S16

Microchip Tech · Specialized Sensors · SOIC-16

RE46C194S16 from Microchip Tech, in a SOIC-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VSS power_in Connects to the negative supply voltage.
2 IRED output Provides a regulated and programmable pulsed current for the infrared emitter diode.
3 VBAT power_in Connects to the positive supply or battery voltage.
4 TEST input Input used to invoke Test modes and the Timer mode, with an internal pull-down.
5 TEST2 input Test input for Test and Programming modes, with an internal pull-down.
6 IRP input Connects to the anode of the photo diode.
7 IRN input Connects to the cathode of the photo diode.
8 RLED output Open-drain NMOS output driving a visible LED; provides load current for the low battery test and is the visual indicator for Alarm and Hush modes.
9 GLED output Open-drain NMOS output driving a visible LED to indicate an Alarm Memory condition.
10 FEED bidirectional Usually connected to the feedback electrode through a current-limiting resistor; if not used it must be connected to VBAT or VSS.
11 IRCAP passive Used to charge and monitor the IRED capacitor.
12 IO bidirectional Bidirectional pin for interconnecting multiple detectors in a single system, with an internal pull-down device and a charge dump device.
13 HB output Connected to the metal electrode of a piezoelectric transducer.
14 HS output Complementary output to HB, connected to the ceramic electrode of the piezoelectric transducer.
15 VBST power_out Boosted voltage produced by the DC-DC converter.
16 LX output Open-drain NMOS output driving the boost converter inductor, which should be connected from this pin to the positive supply through a low-resistance path.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package SOIC-16
Category Sensors
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Voltage VBAT 2 5 V Operating 6
Supply Current IBAT1 1 2 µA Standby, inputs low, no loads, boost off, no smoke check 6
Boost Voltage 1 VBST1 3.3 3.6 3.9 V IRCAP charging for smoke check, GLED operation, IOUT = 20 mA 6
Boost Voltage 2 VBST2 8 8.5 9 V No local alarm, RLED operation, IOUT = 20 mA, IO as an input 6
Boost Voltage 3 BST3 9.4 10 10.6 V No local alarm, RLED operation, IOUT = 20 mA, IO as an input 6
Input Leakage IRP IINOPP -200 200 pA IRP = VBAT or VSS 6
Input Leakage IRN IINOPN -200 200 pA IRN = VBAT or VSS 6
FEED input high current IIHF 20 50 µA FEED = 22V, VBST = 9V 6
FEED input low current IILF -50 -15 µA FEED = -10V, VBST = 10.7V 6
Input Voltage Low FEED VIL1 2.7 V FEED, VBST = 9V 6
Input Voltage Low IO VIL2 800 mV No local alarm, IO as an input 6
Input Voltage High FEED VIH1 6.2 V FEED; VBST = 9V 6
Input Voltage High IO VIH2 2 V No local alarm, IO as an input 6
Input Pull-Down Current IPD1 3 10 30 µA VIN = VBAT 6
IO Pull-Down Current 1 IPDIO1 20 80 µA VIN = VBAT 6
IO Pull-Down Current 2 IPDIO2 140 µA VIN = 15V 6
Output Voltage Low VOL1 500 mV IOL = 16 mA, VBST = 9V 6
Output Voltage Low VOL2 300 mV IOL = 10 mA, VBST = 9V 6
Output High Voltage VOH1 8.5 V IOL = 16 mA, VBST = 9V 6
IO Output Current High IIOH1 -4 -5 mA Alarm, VIO = 3V or VIO = 0V, VBST = 9V 7
IO Dump Current IIODMP 5 15 mA At conclusion of local alarm or test, VIO = 1V 7
IRED Current 50 mA IIRED50 45 50 55 mA IRED on, VIRED = 1V, VBST = 5V, IRCAP = 5V (50 mA option selected; TA = +25°C) 7
IRED Current 100 mA IIRED100 90 100 110 mA IRED on, VIRED = 1V, VBST = 5V, IRCAP = 5V (100 mA option selected; TA = +25°C) 7
IRED Current 150 mA IIRED150 135 150 165 mA IRED on, VIRED = 1V, VBST = 5V, IRCAP = 5V (150 mA option selected; TA = +25°C) 7
IRED Current 200 mA IIRED200 180 200 220 mA IRED on, VIRED = 1V, VBST = 5V, IRCAP = 5V (200 mA option selected; TA = +25°C) 7
Low Battery Alarm Voltage 2.1V VLB1 2.05 2.1 2.15 V Falling edge, 2.1V nominal selected 7
Low Battery Alarm Voltage 2.2V VLB2 2.15 2.2 2.25 V Falling edge, 2.2V nominal selected 7
Low Battery Alarm Voltage 2.3V VLB3 2.25 2.3 2.35 V Falling edge, 2.3V nominal selected 7
Low Battery Alarm Voltage 2.4V VLB4 2.35 2.4 2.45 V Falling edge, 2.4V nominal selected 7
Low Battery Alarm Voltage 2.5V VLB5 2.45 2.5 2.55 V Falling edge, 2.5V nominal selected 7
Low Battery Alarm Voltage 2.6V VLB6 2.55 2.6 2.65 V Falling edge, 2.6V nominal selected 7
Low Battery Alarm Voltage 2.7V VLB7 2.65 2.7 2.75 V Falling edge, 2.7V nominal selected 7
Low Battery Alarm Voltage 2.8V VLB8 2.75 2.8 2.85 V Falling edge, 2.8V nominal selected 7
IRCAP Turn-On Voltage VTIR1 3.6 4 4.4 V Falling edge, VBST = 5V, IOUT = 20 mA 7
IRCAP Turn-Off Voltage VTIR2 4 4.4 4.8 V Rising edge, VBST = 5V, IOUT = 20 mA 7
Internal Clock Period TPCLK 9.8 10.4 11 ms PROGSET, IO = High 8
RLED On Time TON1 9.8 10.4 11 ms Operating 8
RLED Standby Period TPLED1 320 344 368 s Standby, no alarm 8
Smoke Check Duration TPUL 2.82 3 3.18 ms Standby 8
Smoke Check Period, Temporal, standby TPER0 10 10.7 11.4 s Standby, no alarm 8
Chamber Test Period TPCT1 40 43 46 s Standby, no alarm 9
Long-Term Drift Sample Period TLTD 400 430 460 s Standby, no alarm, LTD enabled 9
Hush Timer Period TTPER 480 516 546 s No alarm 9
IRED On Time (100 µs setting) TIRON 100 µs Prog bits 38, 39 = 0, 0 10
IO Active Delay TIODLY1 3.5 3.7 3.9 s From start of local alarm to IO active 10
IO Charge Dump Duration TIODMP 0.475 0.5 0.525 s At conclusion of local alarm or test 10
Operating Temperature Range TA 0 60 °C 11
Storage Temperature Range TSTG -55 125 °C 5
Supply Voltage VDD 5.5 V 5
Boost Supply Voltage VBST 13 V 5
FEED Input Voltage Range VINFD -10 22 V 5
LX Voltage VLX -0.3 13 V 5
IRCAP Voltage VIRCAP 5.5 V 5
Input Current Except FEED Pin IIN 10 mA 5
Continuous Operating Current (HS, HB, VBST) IO 20 mA 5
Continuous Operating Current (IRED) IOIR 300 mA 5
ESD Human Body Model VHBM 2 kV 5
ESD Machine Model VMM 150 V 5
Thermal Resistance, 16L-SOIC (150 mil.) θJA 86.1 °C/W 11
IRED Current Temperature Coefficient TCIRED 0.5 %/°C VBST = 5V, IRCAP = 5V (Note 4) 7

CAD (KiCad official)

  • Symbol: RE46C194S16
  • Footprint: Package_SO:SOIC-16_3.9x9.9mm_P1.27mm
  • 3D model: SOIC-16 (KiCad packages3D, STEP)
  • 3D model files: re46c194s16-etched.step / re46c194s16-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); re46c194s16.step / re46c194s16.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (48 pp, sha256 49dec62c5b78402b, retrieved 2026-10-30, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF