component
SN75DP130SSRGZR
Public Made by Adomby adom
Texas Instruments Interface - Specialized, VQFN-48-EP(7x7). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownSN75DP130SSRGZR
Texas Instruments · Interface - Specialized · VQFN-48-EP(7x7)
SN75DP130SSRGZR from Texas Instruments, in a VQFN-48-EP(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCC | power_in | 3.3-V supply (recommended 3 V to 3.6 V). |
| 2 | VDDD_DREG | passive | Digital voltage regulator decoupling on the SS option; install 1 µF to GND. |
| 3 | ADDR_EQ | input | 3-level input that selects the I2C target address and configures the input EQ. |
| 4 | SCL_CTL | bidirectional | I2C clock of the interface that configures the SN75DP130; active independent of EN but inactive when RSTN is low. |
| 5 | SDA_CTL | bidirectional | I2C data of the interface that configures the SN75DP130; active independent of EN but inactive when RSTN is low. |
| 6 | VCC | power_in | 3.3-V supply (recommended 3 V to 3.6 V). |
| 7 | NC | unconnected | No connect; may be left unconnected or connected to GND. |
| 8 | CAD_SRC | output | DP cable adapter detect output, typically driving the GPU CAD input. |
| 9 | HPD_SRC | output | Hot Plug Detect output to the DisplayPort source. |
| 10 | CAD_SNK | input | DP cable adapter detect input that selects DP or TMDS mode; tolerates a 5-V supply with supply impedance above 90 kΩ, internal zener limits to 3.3 V, external 1 MΩ to GND recommended. |
| 11 | HPD_SNK | input | DisplayPort Hot Plug Detect input from the sink; 5-V tolerant. |
| 12 | VCC | power_in | 3.3-V supply (recommended 3 V to 3.6 V). |
| 13 | OUT3n | output | DisplayPort Main Link Lane 3 differential output, negative (100-Ω differential). |
| 14 | OUT3p | output | DisplayPort Main Link Lane 3 differential output, positive (100-Ω differential). |
| 15 | NC | unconnected | No connect on the SS option; may be left unconnected or connected to GND. |
| 16 | OUT2n | output | DisplayPort Main Link Lane 2 differential output, negative (100-Ω differential). |
| 17 | OUT2p | output | DisplayPort Main Link Lane 2 differential output, positive (100-Ω differential). |
| 18 | GND | power_in | Ground reference. |
| 19 | OUT1n | output | DisplayPort Main Link Lane 1 differential output, negative (100-Ω differential). |
| 20 | OUT1p | output | DisplayPort Main Link Lane 1 differential output, positive (100-Ω differential). |
| 21 | NC | unconnected | No connect on the SS option; may be left unconnected or connected to GND. |
| 22 | OUT0n | output | DisplayPort Main Link Lane 0 differential output, negative (100-Ω differential). |
| 23 | OUT0p | output | DisplayPort Main Link Lane 0 differential output, positive (100-Ω differential). |
| 24 | GND | power_in | Ground reference. |
| 25 | VCC | power_in | 3.3-V supply (recommended 3 V to 3.6 V). |
| 26 | EN | input | Device enable input with internal 200-kΩ pullup. |
| 27 | AUX_SNKn | bidirectional | Sink-side bidirectional DisplayPort auxiliary data channel, negative (100-Ω differential). |
| 28 | AUX_SNKp | bidirectional | Sink-side bidirectional DisplayPort auxiliary data channel, positive (100-Ω differential). |
| 29 | AUX_SRCn | bidirectional | Source-side bidirectional DisplayPort auxiliary data channel, negative; may be left open if AUX_SNK is used for monitoring only. |
| 30 | AUX_SRCp | bidirectional | Source-side bidirectional DisplayPort auxiliary data channel, positive; may be left open if AUX_SNK is used for monitoring only. |
| 31 | GND | power_in | Ground reference. |
| 32 | VCC | power_in | 3.3-V supply (recommended 3 V to 3.6 V). |
| 33 | SCL_DDC | bidirectional | I2C Display Data Channel clock for TMDS mode with integrated 60-kΩ pullup. |
| 34 | SDA_DDC | bidirectional | I2C Display Data Channel data for TMDS mode with integrated 60-kΩ pullup. |
| 35 | RSTN | input | Active-low device reset with 150-kΩ resistor to VDDD; asserting it enters Shutdown mode and resets all I2C and DPCD registers; must not be de-asserted until VCC and VDDD reach minimum levels. |
| 36 | VCC | power_in | 3.3-V supply (recommended 3 V to 3.6 V). |
| 37 | NC | unconnected | No connect on the SS option; may be left unconnected or connected to GND. |
| 38 | IN0p | input | DisplayPort Main Link Lane 0 differential input, positive (100-Ω differential). |
| 39 | IN0n | input | DisplayPort Main Link Lane 0 differential input, negative (100-Ω differential). |
| 40 | NC | unconnected | No connect; may be left unconnected or connected to GND. |
| 41 | IN1p | input | DisplayPort Main Link Lane 1 differential input, positive (100-Ω differential). |
| 42 | IN1n | input | DisplayPort Main Link Lane 1 differential input, negative (100-Ω differential). |
| 43 | NC | unconnected | No connect on the SS option; may be left unconnected or connected to GND. |
| 44 | IN2p | input | DisplayPort Main Link Lane 2 differential input, positive (100-Ω differential). |
| 45 | IN2n | input | DisplayPort Main Link Lane 2 differential input, negative (100-Ω differential). |
| 46 | NC | unconnected | No connect; may be left unconnected or connected to GND. |
| 47 | IN3p | input | DisplayPort Main Link Lane 3 differential input, positive (100-Ω differential). |
| 48 | IN3n | input | DisplayPort Main Link Lane 3 differential input, negative (100-Ω differential). |
| 49 | GND | power_in | Exposed thermal pad; ground reference connection, with several GND vias recommended. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VQFN-48-EP(7x7) |
| Category | Interface |
| Pins | 49 |
CAD (KiCad official)
- Symbol:
SN75DP130SSRGZR - Footprint:
Package_DFN_QFN:QFN-48-1EP_7x7mm_P0.5mm_EP5.15x5.15mm - 3D model: VQFN-48-EP(7x7) (KiCad packages3D, STEP)
- 3D model files:
sn75dp130ssrgzr-etched.step/sn75dp130ssrgzr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sn75dp130ssrgzr.step/sn75dp130ssrgzr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (55 pp, sha256
582604cddc669284, retrieved 2026-10-08, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).