3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownVRD2828PTX
AnaSem · Linear Voltage Regulators (LDO) · SOT-23-6
VRD2828PTX from AnaSem, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | EN1 | input | Channel 1 enable input; high level 1.2V to 6.0V enables, low level of 0.3V max or less shuts down channel 1 and discharges VOUT1 through the internal 160Ω auto-discharge. |
| 2 | VIN | power_in | Common voltage input for both regulators, operating range 1.6V to 6.0V (absolute maximum 7.0V), with a 1µF input capacitor recommended to VSS. |
| 3 | EN2 | input | Channel 2 enable input; high level 1.2V to 6.0V enables, low level of 0.3V max or less shuts down channel 2 and discharges VOUT2 through the internal 160Ω auto-discharge. |
| 4 | VOUT2 | power_out | Channel 2 regulated output, up to 250mA with 300mA current limit, requiring at least a 1.0µF ceramic capacitor to VSS and not to exceed VIN+0.3V. |
| 5 | VSS | power_in | Power ground shared by both regulators. |
| 6 | VOUT1 | power_out | Channel 1 regulated output, up to 250mA with 300mA current limit, requiring at least a 1.0µF ceramic capacitor to VSS and not to exceed VIN+0.3V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | AnaSem |
| Package | SOT-23-6 |
| Category | Power Management ICs |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output voltage | VOUT | 0.99 | 1.01 | xVOUT | VOUT+1.0V≦VIN≦6.0V, IOUT=30mA, Ta=-40°C ~ +85°C, VOUT≧1.95V (printed VOUT×0.99 / VOUT×1.01) | 7 | |
| Dropout voltage | VDROP | 100 | 150 | mV | IOUT=100mA, 2.3V≦VOUT≦2.85V | 7 | |
| Current consumption | IDD | 50 | 80 | µA | VIN=VOUT+1.0V, VOUT=Open, IOUT=0mA | 8 | |
| Standby current | ISTB | 0.01 | 0.1 | µA | EN=VSS | 8 | |
| Input voltage | VIN | 1.6 | 6 | V | 8 | ||
| Load regulation | ∆VOUT | 10 | 40 | mV | VIN=VOUT+1.0V, IOUT=0.1mA ~100mA | 8 | |
| Line regulation | ∆VOUT / ∆VIN•VOUT | 0.01 | 0.1 | %/V | VOUT+1.0V≦VIN≦6.0V, IOUT=30mA | 8 | |
| Limit current | ILIMIT | 300 | mA | EN=VIN | 8 | ||
| Output voltage temperature coefficient | ∆VOUT / ∆Ta•VOUT | -20 | 20 | ppm/°C | VEN=VIN, IOUT=300mA, Ta=-40°C ~ +85°C | 8 | |
| EN high level voltage | VENH | 1.2 | 6 | V | 8 | ||
| EN low level voltage | VENL | 0.3 | V | 8 | |||
| EN high level current | IENH | -0.1 | 0.1 | µA | VEN= VIN | 8 | |
| EN low level current | IENL | -0.1 | 0.1 | µA | VEN= VSS | 8 | |
| Input voltage range (absolute maximum) | VIN | -0.3 | 7 | V | 6 | ||
| Output current (absolute maximum) | IOUT | 500 | mA | 6 | |||
| Output voltage range (absolute maximum) | VOUT | -0.3 | V | VSS -0.3 ~ VIN +0.3 V (min relative to VSS; max is VIN+0.3) | 6 | ||
| Power dissipation SOT-26 | PD | 600 | mW | PCB 50mm×50mm×1.6mm | 6 | ||
| Operating temperature range | TOPR | -40 | 85 | °C | 6 | ||
| Storage temperature range | TSTG | -55 | 125 | °C | 6 | ||
| Output current | IOUT | 250 | mA | VIN≧VOUT+1.0V, 2.3V≦VOUT≦2.85V | 7 | ||
| Ripple rejection | Rr | 75 | dB | VIN=VOUT+1.0V, f=1KHz, ∆VRIP=0.5VP-P, IOUT=30mA | 8 | ||
| Short circuit current | ISHORT | 40 | mA | VIN=VOUT+1.0V, VOUT=0V | 8 | ||
| CL auto-discharge resistance | RDIS | 160 | Ω | VIN=6.0V, VOUT=4.0V, VEN= VSS | 8 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
VRD2828PTX - Footprint:
Package_TO_SOT_SMD:SOT-23-6 - 3D model: SOT-23-6, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.2000000000000002 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
vrd2828ptx-etched.step/vrd2828ptx-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);vrd2828ptx.step/vrd2828ptx.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: AnaSem datasheet (35 pp, sha256
7f8a0b5646548c27, retrieved 2026-11-13, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).