main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers vrd2828ptx: viewers rendered from the public page · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier lcsc, 6 pins · Ray
vrd2828ptx-etched.glb vrd2828ptx: factory component page (tier=lcsc) · Ray
vrd2828ptx-etched.step vrd2828ptx: factory component page (tier=lcsc) · Ray
vrd2828ptx-hero.glb vrd2828ptx: hero GLB from the etched model (keeps the MPN mark) · Ray
vrd2828ptx-hero.overlay.json vrd2828ptx: hero GLB from the etched model (keeps the MPN mark) · Ray
vrd2828ptx.glb Publish 0.1.0 · Ray
vrd2828ptx.kicad_mod Publish 0.1.0 · Ray
vrd2828ptx.kicad_sym Publish 0.1.0 · Ray
vrd2828ptx.lbr Publish 0.1.0 · Ray
vrd2828ptx.step Publish 0.1.0 · Ray

VRD2828PTX

AnaSem · Linear Voltage Regulators (LDO) · SOT-23-6

VRD2828PTX from AnaSem, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 EN1 input Channel 1 enable input; high level 1.2V to 6.0V enables, low level of 0.3V max or less shuts down channel 1 and discharges VOUT1 through the internal 160Ω auto-discharge.
2 VIN power_in Common voltage input for both regulators, operating range 1.6V to 6.0V (absolute maximum 7.0V), with a 1µF input capacitor recommended to VSS.
3 EN2 input Channel 2 enable input; high level 1.2V to 6.0V enables, low level of 0.3V max or less shuts down channel 2 and discharges VOUT2 through the internal 160Ω auto-discharge.
4 VOUT2 power_out Channel 2 regulated output, up to 250mA with 300mA current limit, requiring at least a 1.0µF ceramic capacitor to VSS and not to exceed VIN+0.3V.
5 VSS power_in Power ground shared by both regulators.
6 VOUT1 power_out Channel 1 regulated output, up to 250mA with 300mA current limit, requiring at least a 1.0µF ceramic capacitor to VSS and not to exceed VIN+0.3V.

Key specifications

Parameter Value
Manufacturer AnaSem
Package SOT-23-6
Category Power Management ICs
Pins 6

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Output voltage VOUT 0.99 1.01 xVOUT VOUT+1.0V≦VIN≦6.0V, IOUT=30mA, Ta=-40°C ~ +85°C, VOUT≧1.95V (printed VOUT×0.99 / VOUT×1.01) 7
Dropout voltage VDROP 100 150 mV IOUT=100mA, 2.3V≦VOUT≦2.85V 7
Current consumption IDD 50 80 µA VIN=VOUT+1.0V, VOUT=Open, IOUT=0mA 8
Standby current ISTB 0.01 0.1 µA EN=VSS 8
Input voltage VIN 1.6 6 V 8
Load regulation ∆VOUT 10 40 mV VIN=VOUT+1.0V, IOUT=0.1mA ~100mA 8
Line regulation ∆VOUT / ∆VIN•VOUT 0.01 0.1 %/V VOUT+1.0V≦VIN≦6.0V, IOUT=30mA 8
Limit current ILIMIT 300 mA EN=VIN 8
Output voltage temperature coefficient ∆VOUT / ∆Ta•VOUT -20 20 ppm/°C VEN=VIN, IOUT=300mA, Ta=-40°C ~ +85°C 8
EN high level voltage VENH 1.2 6 V 8
EN low level voltage VENL 0.3 V 8
EN high level current IENH -0.1 0.1 µA VEN= VIN 8
EN low level current IENL -0.1 0.1 µA VEN= VSS 8
Input voltage range (absolute maximum) VIN -0.3 7 V 6
Output current (absolute maximum) IOUT 500 mA 6
Output voltage range (absolute maximum) VOUT -0.3 V VSS -0.3 ~ VIN +0.3 V (min relative to VSS; max is VIN+0.3) 6
Power dissipation SOT-26 PD 600 mW PCB 50mm×50mm×1.6mm 6
Operating temperature range TOPR -40 85 °C 6
Storage temperature range TSTG -55 125 °C 6
Output current IOUT 250 mA VIN≧VOUT+1.0V, 2.3V≦VOUT≦2.85V 7
Ripple rejection Rr 75 dB VIN=VOUT+1.0V, f=1KHz, ∆VRIP=0.5VP-P, IOUT=30mA 8
Short circuit current ISHORT 40 mA VIN=VOUT+1.0V, VOUT=0V 8
CL auto-discharge resistance RDIS 160 Ω VIN=6.0V, VOUT=4.0V, VEN= VSS 8

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: VRD2828PTX
  • Footprint: Package_TO_SOT_SMD:SOT-23-6
  • 3D model: SOT-23-6, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.2000000000000002 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: vrd2828ptx-etched.step / vrd2828ptx-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); vrd2828ptx.step / vrd2828ptx.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: AnaSem datasheet (35 pp, sha256 7f8a0b5646548c27, retrieved 2026-11-13, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF