Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

ISO7341FCQDWQ1

Texas Instruments · Digital Isolators · SOIC-16-300mil

ISO7341FCQDWQ1 from Texas Instruments, in a SOIC-16-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VCC1 power_in Power supply, VCC1 for the side-1 (input) circuitry.
2 GND1 power_in Ground connection for VCC1.
3 INA input Input, channel A.
4 INB input Input, channel B.
5 INC input Input, channel C.
6 OUTD output Output, channel D.
7 EN1 input Output enable 1. Output pins on side-1 are enabled when EN1 is high or disconnected and disabled when EN1 is low.
8 GND1 power_in Ground connection for VCC1.
9 GND2 power_in Ground connection for VCC2.
10 EN2 input Output enable 2. Output pins on side-2 are enabled when EN2 is high or disconnected and disabled when EN2 is low.
11 IND input Input, channel D.
12 OUTC output Output, channel C.
13 OUTB output Output, channel B.
14 OUTA output Output, channel A.
15 GND2 power_in Ground connection for VCC2.
16 VCC2 power_in Power supply, VCC2 for the side-2 (output) circuitry.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOIC-16-300mil
Category Communication Interface Chip/UART/485/232
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VCC1, VCC2 VCC1, VCC2 3 5.5 V 5
High-level output current IOH -4 mA 5
Low-level output current IOL 4 mA 5
High-level input voltage VIH 2 5.5 V 5
Low-level input voltage VIL 0 0.8 V 5
Input pulse duration tui 40 ns 5
Signaling rate 1/tui 0 25 Mbps 5
Junction temperature TJ 136 °C 5
Ambient temperature TA -40 25 125 °C 5
Supply voltage VCC1, VCC2 VCC -0.5 6 V Voltages referenced to local ground 5
Voltage at INx, OUTx, ENx VI, VO -0.5 V Max is VCC + 0.5 V and must not exceed 6 V 5
Output current IO -15 15 mA 5
Maximum junction temperature TJ 150 °C 5
Storage temperature Tstg -65 150 °C 5
Low-level output voltage VOL 0.2 0.4 V 5-V supply; IOL = 4 mA; see Figure 14 9
Low-level output voltage VOL 0 0.1 V 5-V supply; IOL = 20 μA; see Figure 14 9
High-level input current IIH 10 μA 5-V supply; VIH = VCC at INx or ENx 9
Low-level input current IIL -10 μA 5-V supply; VIL = 0 V at INx or ENx 9
Common-mode transient immunity CMTI 25 70 kV/μs 5-V supply; VI = VCC or 0 V; see Figure 17 9
Low-level output voltage VOL 0.2 0.4 V 3.3-V supply; IOL = 4 mA; see Figure 14 10
Low-level output voltage VOL 0 0.1 V 3.3-V supply; IOL = 20 μA; see Figure 14 10
High-level input current IIH 10 μA 3.3-V supply; VIH = VCC at INx or ENx 10
Low-level input current IIL -10 μA 3.3-V supply; VIL = 0 V at INx or ENx 10
Common-mode transient immunity CMTI 25 50 kV/μs 3.3-V supply; VI = VCC or 0 V; see Figure 17 10
Supply current ICC1, disable ICC1 0.8 1.8 mA 5-V supply; EN1 = EN2 = 0 V (disable) 9
Supply current ICC2, disable ICC2 0.7 1.3 mA 5-V supply; EN1 = EN2 = 0 V (disable) 9
Supply current ICC1, DC to 1 Mbps ICC1 2 3.2 mA 5-V supply; all channels switching, CL = 15 pF; DC to 1 Mbps 9
Supply current ICC2, DC to 1 Mbps ICC2 2.9 4.4 mA 5-V supply; all channels switching, CL = 15 pF; DC to 1 Mbps 9
Supply current ICC1, 10 Mbps ICC1 3.2 4.5 mA 5-V supply; all channels switching, CL = 15 pF; 10 Mbps 9
Supply current ICC2, 10 Mbps ICC2 4.9 6.5 mA 5-V supply; all channels switching, CL = 15 pF; 10 Mbps 9
Supply current ICC1, 25 Mbps ICC1 5 7 mA 5-V supply; all channels switching, CL = 15 pF; 25 Mbps 9
Supply current ICC2, 25 Mbps ICC2 7.8 11 mA 5-V supply; all channels switching, CL = 15 pF; 25 Mbps 9
Supply current ICC1, disable ICC1 0.6 1 mA 3.3-V supply; EN1 = EN2 = 0 V (disable) 10
Supply current ICC2, disable ICC2 0.5 0.8 mA 3.3-V supply; EN1 = EN2 = 0 V (disable) 10
Supply current ICC1, DC to 1 Mbps ICC1 1.4 2.3 mA 3.3-V supply; all channels switching, CL = 15 pF; DC to 1 Mbps 10
Supply current ICC2, DC to 1 Mbps ICC2 2.2 3.2 mA 3.3-V supply; all channels switching, CL = 15 pF; DC to 1 Mbps 10
Supply current ICC1, 10 Mbps ICC1 2.2 3 mA 3.3-V supply; all channels switching, CL = 15 pF; 10 Mbps 10
Supply current ICC2, 10 Mbps ICC2 3.4 4.5 mA 3.3-V supply; all channels switching, CL = 15 pF; 10 Mbps 10
Supply current ICC1, 25 Mbps ICC1 3.3 4.7 mA 3.3-V supply; all channels switching, CL = 15 pF; 25 Mbps 10
Supply current ICC2, 25 Mbps ICC2 5.2 7.2 mA 3.3-V supply; all channels switching, CL = 15 pF; 25 Mbps 10
Propagation delay time tPLH, tPHL 20 31 58 ns 5-V supply; see Figure 14 11
Pulse width distortion PWD 4 ns 5-V supply; /tPHL, tPLH/ 11
Channel-to-channel output skew, same-direction channels tsk(o) 2.5 ns 5-V supply; same-direction channels 11
Channel-to-channel output skew, opposite-direction channels tsk(o) 17 ns 5-V supply; opposite-direction channels 11
Part-to-part skew time tsk(pp) 23 ns 5-V supply 11
Disable propagation delay, high-to-high impedance output tPHZ 7 13 ns 5-V supply; see Figure 15 11
Disable propagation delay, low-to-high impedance output tPLZ 7 13 ns 5-V supply; see Figure 15 11
Enable propagation delay, high impedance-to-high output (FC variant) tPZH 15000 23000 ns 5-V supply; ISO734xFCQDWQ1; see Figure 15 11
Enable propagation delay, high impedance-to-low output (FC variant) tPZL 7 13 ns 5-V supply; ISO734xFCQDWQ1; see Figure 15 11
Propagation delay time tPLH, tPHL 22 35 66 ns 3.3-V supply; see Figure 14 11
Pulse width distortion PWD 2.5 ns 3.3-V supply; /tPHL, tPLH/ 11
Channel-to-channel output skew, same-direction channels tsk(o) 3 ns 3.3-V supply; same-direction channels 11
Channel-to-channel output skew, opposite-direction channels tsk(o) 16 ns 3.3-V supply; opposite-direction channels 11
Part-to-part skew time tsk(pp) 28 ns 3.3-V supply 11
Disable propagation delay, high-to-high impedance output tPHZ 9 18 ns 3.3-V supply; see Figure 15 11
Disable propagation delay, low-to-high impedance output tPLZ 9 18 ns 3.3-V supply; see Figure 15 11
Enable propagation delay, high impedance-to-high output (FC variant) tPZH 16000 24000 ns 3.3-V supply; ISO734xFCQDWQ1; see Figure 15 11
Enable propagation delay, high impedance-to-low output (FC variant) tPZL 9 18 ns 3.3-V supply; ISO734xFCQDWQ1; see Figure 15 11
High-level output voltage VOH 4.7 V 5-V supply; IOH = -4 mA; see Figure 14; min VCCO, 0.5 V 9
Junction-to-ambient thermal resistance RθJA 78.4 °C/W DW (SOIC) 16 pins 6

CAD (KiCad official)

  • Symbol: ISO7341FCQDWQ1
  • Footprint: Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm
  • 3D model: SOIC-16-300mil (KiCad packages3D, STEP)
  • 3D model files: iso7341fcqdwq1-etched.step / iso7341fcqdwq1-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); iso7341fcqdwq1.step / iso7341fcqdwq1.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (36 pp, sha256 1baa056c76d48ac4, retrieved 2026-11-12, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF