Generated by kicad-footprint-generator · KiCad file format 20260206
ISO7341FCQDWQ1
Texas Instruments · Digital Isolators · SOIC-16-300mil
ISO7341FCQDWQ1 from Texas Instruments, in a SOIC-16-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCC1 | power_in | Power supply, VCC1 for the side-1 (input) circuitry. |
| 2 | GND1 | power_in | Ground connection for VCC1. |
| 3 | INA | input | Input, channel A. |
| 4 | INB | input | Input, channel B. |
| 5 | INC | input | Input, channel C. |
| 6 | OUTD | output | Output, channel D. |
| 7 | EN1 | input | Output enable 1. Output pins on side-1 are enabled when EN1 is high or disconnected and disabled when EN1 is low. |
| 8 | GND1 | power_in | Ground connection for VCC1. |
| 9 | GND2 | power_in | Ground connection for VCC2. |
| 10 | EN2 | input | Output enable 2. Output pins on side-2 are enabled when EN2 is high or disconnected and disabled when EN2 is low. |
| 11 | IND | input | Input, channel D. |
| 12 | OUTC | output | Output, channel C. |
| 13 | OUTB | output | Output, channel B. |
| 14 | OUTA | output | Output, channel A. |
| 15 | GND2 | power_in | Ground connection for VCC2. |
| 16 | VCC2 | power_in | Power supply, VCC2 for the side-2 (output) circuitry. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-16-300mil |
| Category | Communication Interface Chip/UART/485/232 |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage VCC1, VCC2 | VCC1, VCC2 | 3 | 5.5 | V | 5 | ||
| High-level output current | IOH | -4 | mA | 5 | |||
| Low-level output current | IOL | 4 | mA | 5 | |||
| High-level input voltage | VIH | 2 | 5.5 | V | 5 | ||
| Low-level input voltage | VIL | 0 | 0.8 | V | 5 | ||
| Input pulse duration | tui | 40 | ns | 5 | |||
| Signaling rate | 1/tui | 0 | 25 | Mbps | 5 | ||
| Junction temperature | TJ | 136 | °C | 5 | |||
| Ambient temperature | TA | -40 | 25 | 125 | °C | 5 | |
| Supply voltage VCC1, VCC2 | VCC | -0.5 | 6 | V | Voltages referenced to local ground | 5 | |
| Voltage at INx, OUTx, ENx | VI, VO | -0.5 | V | Max is VCC + 0.5 V and must not exceed 6 V | 5 | ||
| Output current | IO | -15 | 15 | mA | 5 | ||
| Maximum junction temperature | TJ | 150 | °C | 5 | |||
| Storage temperature | Tstg | -65 | 150 | °C | 5 | ||
| Low-level output voltage | VOL | 0.2 | 0.4 | V | 5-V supply; IOL = 4 mA; see Figure 14 | 9 | |
| Low-level output voltage | VOL | 0 | 0.1 | V | 5-V supply; IOL = 20 μA; see Figure 14 | 9 | |
| High-level input current | IIH | 10 | μA | 5-V supply; VIH = VCC at INx or ENx | 9 | ||
| Low-level input current | IIL | -10 | μA | 5-V supply; VIL = 0 V at INx or ENx | 9 | ||
| Common-mode transient immunity | CMTI | 25 | 70 | kV/μs | 5-V supply; VI = VCC or 0 V; see Figure 17 | 9 | |
| Low-level output voltage | VOL | 0.2 | 0.4 | V | 3.3-V supply; IOL = 4 mA; see Figure 14 | 10 | |
| Low-level output voltage | VOL | 0 | 0.1 | V | 3.3-V supply; IOL = 20 μA; see Figure 14 | 10 | |
| High-level input current | IIH | 10 | μA | 3.3-V supply; VIH = VCC at INx or ENx | 10 | ||
| Low-level input current | IIL | -10 | μA | 3.3-V supply; VIL = 0 V at INx or ENx | 10 | ||
| Common-mode transient immunity | CMTI | 25 | 50 | kV/μs | 3.3-V supply; VI = VCC or 0 V; see Figure 17 | 10 | |
| Supply current ICC1, disable | ICC1 | 0.8 | 1.8 | mA | 5-V supply; EN1 = EN2 = 0 V (disable) | 9 | |
| Supply current ICC2, disable | ICC2 | 0.7 | 1.3 | mA | 5-V supply; EN1 = EN2 = 0 V (disable) | 9 | |
| Supply current ICC1, DC to 1 Mbps | ICC1 | 2 | 3.2 | mA | 5-V supply; all channels switching, CL = 15 pF; DC to 1 Mbps | 9 | |
| Supply current ICC2, DC to 1 Mbps | ICC2 | 2.9 | 4.4 | mA | 5-V supply; all channels switching, CL = 15 pF; DC to 1 Mbps | 9 | |
| Supply current ICC1, 10 Mbps | ICC1 | 3.2 | 4.5 | mA | 5-V supply; all channels switching, CL = 15 pF; 10 Mbps | 9 | |
| Supply current ICC2, 10 Mbps | ICC2 | 4.9 | 6.5 | mA | 5-V supply; all channels switching, CL = 15 pF; 10 Mbps | 9 | |
| Supply current ICC1, 25 Mbps | ICC1 | 5 | 7 | mA | 5-V supply; all channels switching, CL = 15 pF; 25 Mbps | 9 | |
| Supply current ICC2, 25 Mbps | ICC2 | 7.8 | 11 | mA | 5-V supply; all channels switching, CL = 15 pF; 25 Mbps | 9 | |
| Supply current ICC1, disable | ICC1 | 0.6 | 1 | mA | 3.3-V supply; EN1 = EN2 = 0 V (disable) | 10 | |
| Supply current ICC2, disable | ICC2 | 0.5 | 0.8 | mA | 3.3-V supply; EN1 = EN2 = 0 V (disable) | 10 | |
| Supply current ICC1, DC to 1 Mbps | ICC1 | 1.4 | 2.3 | mA | 3.3-V supply; all channels switching, CL = 15 pF; DC to 1 Mbps | 10 | |
| Supply current ICC2, DC to 1 Mbps | ICC2 | 2.2 | 3.2 | mA | 3.3-V supply; all channels switching, CL = 15 pF; DC to 1 Mbps | 10 | |
| Supply current ICC1, 10 Mbps | ICC1 | 2.2 | 3 | mA | 3.3-V supply; all channels switching, CL = 15 pF; 10 Mbps | 10 | |
| Supply current ICC2, 10 Mbps | ICC2 | 3.4 | 4.5 | mA | 3.3-V supply; all channels switching, CL = 15 pF; 10 Mbps | 10 | |
| Supply current ICC1, 25 Mbps | ICC1 | 3.3 | 4.7 | mA | 3.3-V supply; all channels switching, CL = 15 pF; 25 Mbps | 10 | |
| Supply current ICC2, 25 Mbps | ICC2 | 5.2 | 7.2 | mA | 3.3-V supply; all channels switching, CL = 15 pF; 25 Mbps | 10 | |
| Propagation delay time | tPLH, tPHL | 20 | 31 | 58 | ns | 5-V supply; see Figure 14 | 11 |
| Pulse width distortion | PWD | 4 | ns | 5-V supply; /tPHL, tPLH/ | 11 | ||
| Channel-to-channel output skew, same-direction channels | tsk(o) | 2.5 | ns | 5-V supply; same-direction channels | 11 | ||
| Channel-to-channel output skew, opposite-direction channels | tsk(o) | 17 | ns | 5-V supply; opposite-direction channels | 11 | ||
| Part-to-part skew time | tsk(pp) | 23 | ns | 5-V supply | 11 | ||
| Disable propagation delay, high-to-high impedance output | tPHZ | 7 | 13 | ns | 5-V supply; see Figure 15 | 11 | |
| Disable propagation delay, low-to-high impedance output | tPLZ | 7 | 13 | ns | 5-V supply; see Figure 15 | 11 | |
| Enable propagation delay, high impedance-to-high output (FC variant) | tPZH | 15000 | 23000 | ns | 5-V supply; ISO734xFCQDWQ1; see Figure 15 | 11 | |
| Enable propagation delay, high impedance-to-low output (FC variant) | tPZL | 7 | 13 | ns | 5-V supply; ISO734xFCQDWQ1; see Figure 15 | 11 | |
| Propagation delay time | tPLH, tPHL | 22 | 35 | 66 | ns | 3.3-V supply; see Figure 14 | 11 |
| Pulse width distortion | PWD | 2.5 | ns | 3.3-V supply; /tPHL, tPLH/ | 11 | ||
| Channel-to-channel output skew, same-direction channels | tsk(o) | 3 | ns | 3.3-V supply; same-direction channels | 11 | ||
| Channel-to-channel output skew, opposite-direction channels | tsk(o) | 16 | ns | 3.3-V supply; opposite-direction channels | 11 | ||
| Part-to-part skew time | tsk(pp) | 28 | ns | 3.3-V supply | 11 | ||
| Disable propagation delay, high-to-high impedance output | tPHZ | 9 | 18 | ns | 3.3-V supply; see Figure 15 | 11 | |
| Disable propagation delay, low-to-high impedance output | tPLZ | 9 | 18 | ns | 3.3-V supply; see Figure 15 | 11 | |
| Enable propagation delay, high impedance-to-high output (FC variant) | tPZH | 16000 | 24000 | ns | 3.3-V supply; ISO734xFCQDWQ1; see Figure 15 | 11 | |
| Enable propagation delay, high impedance-to-low output (FC variant) | tPZL | 9 | 18 | ns | 3.3-V supply; ISO734xFCQDWQ1; see Figure 15 | 11 | |
| High-level output voltage | VOH | 4.7 | V | 5-V supply; IOH = -4 mA; see Figure 14; min VCCO, 0.5 V | 9 | ||
| Junction-to-ambient thermal resistance | RθJA | 78.4 | °C/W | DW (SOIC) 16 pins | 6 |
CAD (KiCad official)
- Symbol:
ISO7341FCQDWQ1 - Footprint:
Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm - 3D model: SOIC-16-300mil (KiCad packages3D, STEP)
- 3D model files:
iso7341fcqdwq1-etched.step/iso7341fcqdwq1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);iso7341fcqdwq1.step/iso7341fcqdwq1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (36 pp, sha256
1baa056c76d48ac4, retrieved 2026-11-12, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).