Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

SK6693

Suntek · DC-DC Converters · SOT-23-6

SK6693 from Suntek, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 BS passive Bootstrap pin: a capacitor connected between SW and BST is required to form a floating supply across the high-side switch driver, with BS voltage to SW rated -0.3 V to 6.5 V.
2 GND power_in Ground pin of the regulator.
3 FB input Adjustable-version feedback input that connects to the centre point of the external resistor divider, with FB voltage rated -0.3 V to 6 V.
4 EN input Enable input: logic-high enables the IC and logic-low disables it into micro-power shutdown, with EN rising threshold 1.2 V, falling threshold 0.8 V and voltage rated -0.3 V to 17 V.
5 IN power_in Power supply input with a 4.5 V to 16 V operating input range and an absolute maximum VIN of -0.3 V to 17 V.
6 SW output Switching pin; SW voltage is rated -0.3 V to VIN+1 V (-5 V to VIN+2 V for 10 ns transients).

Key specifications

Parameter Value
Manufacturer Suntek
Package SOT-23-6
Category Power Supply Chip
Pins 6

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
VIN voltage -0.3 17 V 3
EN voltage -0.3 17 V 3
SW voltage -0.3 V 3
SW voltage (10ns transient) -5 V 10ns transient 3
BS voltage (to sw) -0.3 6.5 V 3
BS voltage -0.3 23.5 V 3
FB voltage -0.3 6 V 3
Operating junction temperature TJ -40 150 °C 3
Storage temperature Tstg -55 150 °C 3
Lead Temperature (Soldering, 10sec.) 260 °C Soldering, 10sec. 3
ESD Human Body Model (HBM) V(ESD-HBM) -2000 2000 V ANSI/ESDA/JEDEC JS-001-2014 Classification, Class: 2 3
ESD Charged Device Model (CDM) V(ESD-CDM) -200 200 V ANSI/ESDA/JEDEC JS-002-2014 Classification, Class: C0b 3
Latch-up ILATCH-UP -150 150 mA JEDEC STANDARD NO.78E APRIL 2016 Temperature Classification, Class: I 3
Operating junction temperature -40 125 °C 3
Operating temperature range -40 85 °C 3
Input voltage VIN 4.5 16 V 3
Output current 0 3 A 3
Input Voltage Range 4.5 16 V 4
Output Voltage Range 0.765 7 V 4
Feedback Voltage 0.585 0.6 0.615 V 4
Supply Current (Quiescent) 0.6 0.8 mA VEN =3.0V 4
Under-Voltage Lockout Threshold, Wake up VIN Voltage 3.9 4.3 V 4
Under-Voltage Lockout Threshold, Shutdown VIN Voltage 2.9 3.2 V 4
Supply Current (Shutdown) 4 uA VEN =0 or EN = GND 4
Output UVP threshold 60 % Hiccup detect (H > L) 4
Hiccup wait time 2 ms 4
Hiccup time before restart 36 ms 4
Over Voltage Protection Threshold 16.5 V 4
Switching Frequency 500 KHz 4
Maximum Duty Cycle 94 % VFB=90% 4
Minimum Off-Time 89 nS 4
EN Rising Threshold 1.2 V 4
EN Falling Threshold 0.8 V 4
High-Side Switch On-Resistance 70 mΩ ISW=100mA 4
Low-Side Switch On-Resistance 50 mΩ ISW=-100mA 4
Valley Switch Current Limit 3.4 A 4
Soft Start 1.5 mS 4
Thermal Shutdown 160 ℃ 4
Thermal Hysteresis 30 ℃ 4
Junction-to-ambient thermal resistance (RθJA) RθJA 105 °C/W Note (1)(2): JESD 51-7; simulated on 4-layer JEDEC board 4
Junction-to-case (top) thermal resistance RθJC(top) 55 °C/W 4
Junction-to-board thermal resistance RθJB 17.5 °C/W 4
Junction-to-top characterization parameter ψJT 3.5 °C/W 4
Junction-to-board characterization parameter ψJB 17.5 °C/W 4

CAD (KiCad official)

  • Symbol: SK6693
  • Footprint: Package_TO_SOT_SMD:SOT-23-6
  • 3D model: SOT-23-6 (KiCad packages3D, STEP)
  • 3D model files: sk6693-etched.step / sk6693-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); sk6693.step / sk6693.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Suntek datasheet (13 pp, sha256 ab9214f97fc1691b, retrieved 2026-11-05, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF