Generated by kicad-footprint-generator · KiCad file format 20260206
SK6693
Suntek · DC-DC Converters · SOT-23-6
SK6693 from Suntek, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | BS | passive | Bootstrap pin: a capacitor connected between SW and BST is required to form a floating supply across the high-side switch driver, with BS voltage to SW rated -0.3 V to 6.5 V. |
| 2 | GND | power_in | Ground pin of the regulator. |
| 3 | FB | input | Adjustable-version feedback input that connects to the centre point of the external resistor divider, with FB voltage rated -0.3 V to 6 V. |
| 4 | EN | input | Enable input: logic-high enables the IC and logic-low disables it into micro-power shutdown, with EN rising threshold 1.2 V, falling threshold 0.8 V and voltage rated -0.3 V to 17 V. |
| 5 | IN | power_in | Power supply input with a 4.5 V to 16 V operating input range and an absolute maximum VIN of -0.3 V to 17 V. |
| 6 | SW | output | Switching pin; SW voltage is rated -0.3 V to VIN+1 V (-5 V to VIN+2 V for 10 ns transients). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Suntek |
| Package | SOT-23-6 |
| Category | Power Supply Chip |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VIN voltage | -0.3 | 17 | V | 3 | |||
| EN voltage | -0.3 | 17 | V | 3 | |||
| SW voltage | -0.3 | V | 3 | ||||
| SW voltage (10ns transient) | -5 | V | 10ns transient | 3 | |||
| BS voltage (to sw) | -0.3 | 6.5 | V | 3 | |||
| BS voltage | -0.3 | 23.5 | V | 3 | |||
| FB voltage | -0.3 | 6 | V | 3 | |||
| Operating junction temperature | TJ | -40 | 150 | °C | 3 | ||
| Storage temperature | Tstg | -55 | 150 | °C | 3 | ||
| Lead Temperature (Soldering, 10sec.) | 260 | °C | Soldering, 10sec. | 3 | |||
| ESD Human Body Model (HBM) | V(ESD-HBM) | -2000 | 2000 | V | ANSI/ESDA/JEDEC JS-001-2014 Classification, Class: 2 | 3 | |
| ESD Charged Device Model (CDM) | V(ESD-CDM) | -200 | 200 | V | ANSI/ESDA/JEDEC JS-002-2014 Classification, Class: C0b | 3 | |
| Latch-up | ILATCH-UP | -150 | 150 | mA | JEDEC STANDARD NO.78E APRIL 2016 Temperature Classification, Class: I | 3 | |
| Operating junction temperature | -40 | 125 | °C | 3 | |||
| Operating temperature range | -40 | 85 | °C | 3 | |||
| Input voltage | VIN | 4.5 | 16 | V | 3 | ||
| Output current | 0 | 3 | A | 3 | |||
| Input Voltage Range | 4.5 | 16 | V | 4 | |||
| Output Voltage Range | 0.765 | 7 | V | 4 | |||
| Feedback Voltage | 0.585 | 0.6 | 0.615 | V | 4 | ||
| Supply Current (Quiescent) | 0.6 | 0.8 | mA | VEN =3.0V | 4 | ||
| Under-Voltage Lockout Threshold, Wake up VIN Voltage | 3.9 | 4.3 | V | 4 | |||
| Under-Voltage Lockout Threshold, Shutdown VIN Voltage | 2.9 | 3.2 | V | 4 | |||
| Supply Current (Shutdown) | 4 | uA | VEN =0 or EN = GND | 4 | |||
| Output UVP threshold | 60 | % | Hiccup detect (H > L) | 4 | |||
| Hiccup wait time | 2 | ms | 4 | ||||
| Hiccup time before restart | 36 | ms | 4 | ||||
| Over Voltage Protection Threshold | 16.5 | V | 4 | ||||
| Switching Frequency | 500 | KHz | 4 | ||||
| Maximum Duty Cycle | 94 | % | VFB=90% | 4 | |||
| Minimum Off-Time | 89 | nS | 4 | ||||
| EN Rising Threshold | 1.2 | V | 4 | ||||
| EN Falling Threshold | 0.8 | V | 4 | ||||
| High-Side Switch On-Resistance | 70 | mΩ | ISW=100mA | 4 | |||
| Low-Side Switch On-Resistance | 50 | mΩ | ISW=-100mA | 4 | |||
| Valley Switch Current Limit | 3.4 | A | 4 | ||||
| Soft Start | 1.5 | mS | 4 | ||||
| Thermal Shutdown | 160 | ℃ | 4 | ||||
| Thermal Hysteresis | 30 | ℃ | 4 | ||||
| Junction-to-ambient thermal resistance (RθJA) | RθJA | 105 | °C/W | Note (1)(2): JESD 51-7; simulated on 4-layer JEDEC board | 4 | ||
| Junction-to-case (top) thermal resistance | RθJC(top) | 55 | °C/W | 4 | |||
| Junction-to-board thermal resistance | RθJB | 17.5 | °C/W | 4 | |||
| Junction-to-top characterization parameter | ψJT | 3.5 | °C/W | 4 | |||
| Junction-to-board characterization parameter | ψJB | 17.5 | °C/W | 4 |
CAD (KiCad official)
- Symbol:
SK6693 - Footprint:
Package_TO_SOT_SMD:SOT-23-6 - 3D model: SOT-23-6 (KiCad packages3D, STEP)
- 3D model files:
sk6693-etched.step/sk6693-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sk6693.step/sk6693.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Suntek datasheet (13 pp, sha256
ab9214f97fc1691b, retrieved 2026-11-05, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).