3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownLR432ALT1G
LRC · Voltage Reference · SOT-23
LR432ALT1G from LRC, in a SOT-23. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | REF | input | Reference input. High-impedance sense input; internal amplifier drives the cathode to hold this pin at VREF (typ. 1.240 V, 1.228-1.252 V). Set the output voltage with a resistor divider: Vo = VREF·(1+R1/R2) + IREF·R1. Input current IREF ≈ 0.25 µA typ, 0.5 µA max. |
| 2 | K | passive | Cathode. Regulated output terminal that sinks current from the load to hold VREF between REF and Anode. Maximum cathode voltage VKA = 18 V; continuous cathode current IK up to 100 mA; minimum operating current 60-80 µA; dynamic output impedance ~0.2 Ω typ. |
| 3 | A | passive | Anode. Common/ground return terminal of the shunt regulator; typically tied to circuit ground in shunt/series/switching-regulator and voltage-reference topologies. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | LRC |
| Package | SOT-23 |
| Category | PMIC |
| Pins | 3 |
Ordering variants
LR432ALT1GLR432ALT1GLT3G
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Reference voltage | VREF | 1.228 | 1.24 | 1.252 | V | VKA=VREF, IK=10mA (Fig. 1), TA=25°C | 2 |
| VREF temp deviation | VDEV | 10 | 25 | mV | TA=full range (see Note 1), VKA=VREF, IK=10mA (Fig. 1) | 2 | |
| Ratio of change in VREF to change in cathode voltage | ∆VREF/∆VKA | -1 | -2.7 | mV / V | IK=10mA, VKA=18V to VREF (Fig. 2) | 2 | |
| Off-state cathode current | Ik(off) | 0.04 | 0.5 | µA | VREF=0 V (Fig. 3), Vk=18V | 2 | |
| Dynamic output impedance | Zka | 0.2 | 0.4 | Ω | Vka=Vref, Ik=1mA to 100mA, f≤1kHz (Fig. 1) | 2 | |
| Minimum operating current | IK(MIN) | 60 | 80 | µA | VKA=VREF (Fig. 1) | 2 | |
| IREF temp deviation | IREF(DEV) | 0.05 | 0.3 | µA | TK=full range (see Note 1), R1=10kΩ, R2=∞, IK=10mA (Fig. 2) | 2 | |
| Continuous cathode current range | IK | 100 | mA | 2 | |||
| Reference current range | IREF | 3 | mA | 2 | |||
| Operating ambient temperature | Topr | -40 | 105 | °C | 2 | ||
| Operating junction temperature range | Tj | 150 | °C | 2 |
CAD (KiCad official)
- Symbol:
LR432ALT1G - Footprint:
Package_TO_SOT_SMD:SOT-23 - 3D model: SOT-23 (KiCad packages3D, STEP)
- 3D model files:
lr432alt1g-etched.step/lr432alt1g-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lr432alt1g.step/lr432alt1g.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: LRC datasheet (None pp, sha256
bf9231714b6cad8c, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.