main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs lr432alt1g: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers lr432alt1g: viewers · Ray
lr432alt1g-etched.fit.json lr432alt1g: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
lr432alt1g-etched.glb lr432alt1g: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
lr432alt1g-etched.step lr432alt1g: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
lr432alt1g.glb Publish 0.1.0 · Ray
lr432alt1g.kicad_mod Publish 0.1.0 · Ray
lr432alt1g.kicad_sym Publish 0.1.0 · Ray
lr432alt1g.lbr Publish 0.1.0 · Ray
lr432alt1g.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json lr432alt1g: specified limits as data (metadata.characteristics, 11 rows from the datasheet) · Ray
README.md lr432alt1g: specified limits as data (metadata.characteristics, 11 rows from the datasheet) · Ray

LR432ALT1G

LRC · Voltage Reference · SOT-23

LR432ALT1G from LRC, in a SOT-23. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 REF input Reference input. High-impedance sense input; internal amplifier drives the cathode to hold this pin at VREF (typ. 1.240 V, 1.228-1.252 V). Set the output voltage with a resistor divider: Vo = VREF·(1+R1/R2) + IREF·R1. Input current IREF ≈ 0.25 µA typ, 0.5 µA max.
2 K passive Cathode. Regulated output terminal that sinks current from the load to hold VREF between REF and Anode. Maximum cathode voltage VKA = 18 V; continuous cathode current IK up to 100 mA; minimum operating current 60-80 µA; dynamic output impedance ~0.2 Ω typ.
3 A passive Anode. Common/ground return terminal of the shunt regulator; typically tied to circuit ground in shunt/series/switching-regulator and voltage-reference topologies.

Key specifications

Parameter Value
Manufacturer LRC
Package SOT-23
Category PMIC
Pins 3

Ordering variants

  • LR432ALT1G
  • LR432ALT1GLT3G

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Reference voltage VREF 1.228 1.24 1.252 V VKA=VREF, IK=10mA (Fig. 1), TA=25°C 2
VREF temp deviation VDEV 10 25 mV TA=full range (see Note 1), VKA=VREF, IK=10mA (Fig. 1) 2
Ratio of change in VREF to change in cathode voltage ∆VREF/∆VKA -1 -2.7 mV / V IK=10mA, VKA=18V to VREF (Fig. 2) 2
Off-state cathode current Ik(off) 0.04 0.5 µA VREF=0 V (Fig. 3), Vk=18V 2
Dynamic output impedance Zka 0.2 0.4 Ω Vka=Vref, Ik=1mA to 100mA, f≤1kHz (Fig. 1) 2
Minimum operating current IK(MIN) 60 80 µA VKA=VREF (Fig. 1) 2
IREF temp deviation IREF(DEV) 0.05 0.3 µA TK=full range (see Note 1), R1=10kΩ, R2=∞, IK=10mA (Fig. 2) 2
Continuous cathode current range IK 100 mA 2
Reference current range IREF 3 mA 2
Operating ambient temperature Topr -40 105 °C 2
Operating junction temperature range Tj 150 °C 2

CAD (KiCad official)

  • Symbol: LR432ALT1G
  • Footprint: Package_TO_SOT_SMD:SOT-23
  • 3D model: SOT-23 (KiCad packages3D, STEP)
  • 3D model files: lr432alt1g-etched.step / lr432alt1g-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lr432alt1g.step / lr432alt1g.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: LRC datasheet (None pp, sha256 bf9231714b6cad8c, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF