Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

LGS54360

Legend-Si · DC-DC Converters · ESOP-8

LGS54360 from Legend-Si, in a ESOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 BST power_out Self-driving bootstrap supply for the internal high-side gate driver, requiring a ceramic capacitor of at least 100nF between BST and SW.
2 VIN power_in Input power pin feeding the upper power MOSFET and VIN linear supply, with decoupling ceramic capacitors placed as close as possible between VIN and GND; recommended input range is 4.5V to 65V.
3 EN input Voltage regulator output enable pin, set high to enable output; VIN undervoltage protection can be set with an external resistor divider, and the EN high threshold is 1.1V minimum.
4 FREQ input Working frequency setting pin, where a resistor between FREQ and GND sets the switching frequency adjustable from 200KHz to 2MHz.
5 FB input Output voltage feedback pin, where the voltage divider between VOUT and GND sets the output voltage with a 1.0V feedback reference.
6 VCC power_out Output of the internal LDO powering the internal control circuits and driving the internal MOSFETs, requiring a 1uF to 4.7uF ceramic decoupling capacitor between VCC and GND.
7 GND power_in Ground pin connected to the metal heat sink, used as GND.
8 SW output Internal power switch node connecting the external power inductor and the CBST bootstrap capacitor.
9 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Legend-Si
Package ESOP-8
Category Power Supply Chip
Pins 9

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Pin to GND voltage (VIN, SW, EN) -0.3 80 V 5
Pin to SW voltage (BST) -0.3 5.5 V 5
Pin to GND voltage (FB, FREQ, VCC) -0.3 5.5 V 5
ESD rating (HBM) -2 2 KV HBM; printed ±2KV 5
ESD rating (CDM) -1 1 KV CDM; printed ±1KV 5
VIN recommended input voltage range VIN 4.5 65 V 5
EN pin voltage EN -0.3 65 V 5
FB pin voltage FB -0.3 1.1 V 5
Output voltage VOUT 1 V printed as 1V~VIN; maximum is VIN (not numeric) 5
Output current IOUT 0 3 A 5
Work completion temperature (operating junction) -40 125 °C 5
VCC output voltage VCC 4.8 5 5.2 V VIN=24V 7
FB feedback voltage VFB_acc 0.99 1 1.01 V 7
Upper pipe RDSON RDS_HS 130 160 mΩ TJ= 25 7
Lower pipe RDSON RDS_LS 95 130 mΩ TJ= 25 7
Switching frequency accuracy FSW 0.9 1 1.1 MHz PWM Operation; RFREQ = 162k 7
Switching frequency range FSW_range 0.2 2 MHz with 1% RFREQ 7
EN undervoltage protection rising edge VEN_UV_R 1.19 1.2 1.21 V 7
EN undervoltage protection falling edge VEN_UV_F 1.14 1.15 1.16 V 7
VIN undervoltage protection threshold (rising) VIN_GD 4 V Rising 7
VIN undervoltage protection threshold (falling) VIN_GD 3.6 V Falling 7
VIN equivalent static current IQ 130 uA VIN=24V, VFB=1.2V; No switch 7
VCC undervoltage protection (rising) VCC_GD 3.5 V Rising 7
VCC undervoltage protection (falling) VCC_GD 3.2 V Falling 7
VCC short-circuit current (VIN power supply) ISC_VCC 20 mA VIN=24V 7
FB jump cycle threshold VFB_skip 1.003 V 7
FB leakage current IFB_leak 80 nA 7
Upper tube current limit lPeak_HS 3.7 A 7
Lower tube current limit IPeak_LS 3.3 A 7
Zero crossing of lower tube current IZCD 50 mA 7
SW leakage current ISW.LKG 1 uA 7
Minimum conduction time of upper tube THSON.MIN 90 ns 7
Minimum conduction time of lower tube TLSON.MIN 160 ns 7
Short circuit protection triggering time TSCP_HOLD 5 ms 7
Short circuit protection hiccup waiting time TSCP_HICCUP 4 ms 7
EN high logic threshold VEN_H 1.1 V 7
EN low logic threshold VEN_L 0.5 V 7
EN input current ILKG-EN 1 uA EN < 65V 7
Over temperature protection (rising) TOTP-R 160 °C TJ Rising 7
Over temperature protection released (falling) TOTP-F 145 °C TJ Falling 7
Thermal resistance, silicon core to ambient air θJA 42.9 °C/W 0 LFPM air flow 8
Thermal resistance, silicon core to PCB board surface θJB 13.6 °C/W 8
Thermal resistance, silicon core to packaging surface θJCtop 54 °C/W 8
Thermal resistance, silicon core to PCB board surface ΨJB 13.8 °C/W 8

CAD (KiCad official)

  • Symbol: LGS54360
  • Footprint: Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.3mm
  • 3D model: ESOP-8 (KiCad packages3D, STEP)
  • 3D model files: lgs54360-etched.step / lgs54360-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lgs54360.step / lgs54360.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Legend-Si datasheet (25 pp, sha256 56d53e2d67137c07, retrieved 2026-11-04, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF