3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownLGS54360
Legend-Si · DC-DC Converters · ESOP-8
LGS54360 from Legend-Si, in a ESOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | BST | power_out | Self-driving bootstrap supply for the internal high-side gate driver, requiring a ceramic capacitor of at least 100nF between BST and SW. |
| 2 | VIN | power_in | Input power pin feeding the upper power MOSFET and VIN linear supply, with decoupling ceramic capacitors placed as close as possible between VIN and GND; recommended input range is 4.5V to 65V. |
| 3 | EN | input | Voltage regulator output enable pin, set high to enable output; VIN undervoltage protection can be set with an external resistor divider, and the EN high threshold is 1.1V minimum. |
| 4 | FREQ | input | Working frequency setting pin, where a resistor between FREQ and GND sets the switching frequency adjustable from 200KHz to 2MHz. |
| 5 | FB | input | Output voltage feedback pin, where the voltage divider between VOUT and GND sets the output voltage with a 1.0V feedback reference. |
| 6 | VCC | power_out | Output of the internal LDO powering the internal control circuits and driving the internal MOSFETs, requiring a 1uF to 4.7uF ceramic decoupling capacitor between VCC and GND. |
| 7 | GND | power_in | Ground pin connected to the metal heat sink, used as GND. |
| 8 | SW | output | Internal power switch node connecting the external power inductor and the CBST bootstrap capacitor. |
| 9 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Legend-Si |
| Package | ESOP-8 |
| Category | Power Supply Chip |
| Pins | 9 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Pin to GND voltage (VIN, SW, EN) | -0.3 | 80 | V | 5 | |||
| Pin to SW voltage (BST) | -0.3 | 5.5 | V | 5 | |||
| Pin to GND voltage (FB, FREQ, VCC) | -0.3 | 5.5 | V | 5 | |||
| ESD rating (HBM) | -2 | 2 | KV | HBM; printed ±2KV | 5 | ||
| ESD rating (CDM) | -1 | 1 | KV | CDM; printed ±1KV | 5 | ||
| VIN recommended input voltage range | VIN | 4.5 | 65 | V | 5 | ||
| EN pin voltage | EN | -0.3 | 65 | V | 5 | ||
| FB pin voltage | FB | -0.3 | 1.1 | V | 5 | ||
| Output voltage | VOUT | 1 | V | printed as 1V~VIN; maximum is VIN (not numeric) | 5 | ||
| Output current | IOUT | 0 | 3 | A | 5 | ||
| Work completion temperature (operating junction) | -40 | 125 | °C | 5 | |||
| VCC output voltage | VCC | 4.8 | 5 | 5.2 | V | VIN=24V | 7 |
| FB feedback voltage | VFB_acc | 0.99 | 1 | 1.01 | V | 7 | |
| Upper pipe RDSON | RDS_HS | 130 | 160 | mΩ | TJ= 25 | 7 | |
| Lower pipe RDSON | RDS_LS | 95 | 130 | mΩ | TJ= 25 | 7 | |
| Switching frequency accuracy | FSW | 0.9 | 1 | 1.1 | MHz | PWM Operation; RFREQ = 162k | 7 |
| Switching frequency range | FSW_range | 0.2 | 2 | MHz | with 1% RFREQ | 7 | |
| EN undervoltage protection rising edge | VEN_UV_R | 1.19 | 1.2 | 1.21 | V | 7 | |
| EN undervoltage protection falling edge | VEN_UV_F | 1.14 | 1.15 | 1.16 | V | 7 | |
| VIN undervoltage protection threshold (rising) | VIN_GD | 4 | V | Rising | 7 | ||
| VIN undervoltage protection threshold (falling) | VIN_GD | 3.6 | V | Falling | 7 | ||
| VIN equivalent static current | IQ | 130 | uA | VIN=24V, VFB=1.2V; No switch | 7 | ||
| VCC undervoltage protection (rising) | VCC_GD | 3.5 | V | Rising | 7 | ||
| VCC undervoltage protection (falling) | VCC_GD | 3.2 | V | Falling | 7 | ||
| VCC short-circuit current (VIN power supply) | ISC_VCC | 20 | mA | VIN=24V | 7 | ||
| FB jump cycle threshold | VFB_skip | 1.003 | V | 7 | |||
| FB leakage current | IFB_leak | 80 | nA | 7 | |||
| Upper tube current limit | lPeak_HS | 3.7 | A | 7 | |||
| Lower tube current limit | IPeak_LS | 3.3 | A | 7 | |||
| Zero crossing of lower tube current | IZCD | 50 | mA | 7 | |||
| SW leakage current | ISW.LKG | 1 | uA | 7 | |||
| Minimum conduction time of upper tube | THSON.MIN | 90 | ns | 7 | |||
| Minimum conduction time of lower tube | TLSON.MIN | 160 | ns | 7 | |||
| Short circuit protection triggering time | TSCP_HOLD | 5 | ms | 7 | |||
| Short circuit protection hiccup waiting time | TSCP_HICCUP | 4 | ms | 7 | |||
| EN high logic threshold | VEN_H | 1.1 | V | 7 | |||
| EN low logic threshold | VEN_L | 0.5 | V | 7 | |||
| EN input current | ILKG-EN | 1 | uA | EN < 65V | 7 | ||
| Over temperature protection (rising) | TOTP-R | 160 | °C | TJ Rising | 7 | ||
| Over temperature protection released (falling) | TOTP-F | 145 | °C | TJ Falling | 7 | ||
| Thermal resistance, silicon core to ambient air | θJA | 42.9 | °C/W | 0 LFPM air flow | 8 | ||
| Thermal resistance, silicon core to PCB board surface | θJB | 13.6 | °C/W | 8 | |||
| Thermal resistance, silicon core to packaging surface | θJCtop | 54 | °C/W | 8 | |||
| Thermal resistance, silicon core to PCB board surface | ΨJB | 13.8 | °C/W | 8 |
CAD (KiCad official)
- Symbol:
LGS54360 - Footprint:
Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.3mm - 3D model: ESOP-8 (KiCad packages3D, STEP)
- 3D model files:
lgs54360-etched.step/lgs54360-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lgs54360.step/lgs54360.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Legend-Si datasheet (25 pp, sha256
56d53e2d67137c07, retrieved 2026-11-04, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).