3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownPIC18F252T-I
Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · SOIC-28-300mil
PIC18F252T-I from Microchip Tech, in a SOIC-28-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | MCLR/VPP | input | Active-low master clear (Reset) input; also the high-voltage ICSP programming enable pin (VPP). |
| 2 | RA0/AN0 | bidirectional | General-purpose digital I/O (PORTA, TTL input levels) multiplexed with analog input 0. |
| 3 | RA1/AN1 | bidirectional | General-purpose digital I/O (PORTA, TTL input levels) multiplexed with analog input 1. |
| 4 | RA2/AN2/VREF- | bidirectional | General-purpose digital I/O (PORTA, TTL input levels) multiplexed with analog input 2 and A/D reference voltage (low) input. |
| 5 | RA3/AN3/VREF+ | bidirectional | General-purpose digital I/O (PORTA, TTL input levels) multiplexed with analog input 3 and A/D reference voltage (high) input. |
| 6 | RA4/T0CKI | bidirectional | Digital I/O with Schmitt-trigger input, open drain when configured as output; also Timer0 external clock input. |
| 7 | RA5/AN4/SS/LVDIN | bidirectional | General-purpose digital I/O multiplexed with analog input 4, SPI slave select input and low voltage detect input. |
| 8 | VSS | power_in | Ground reference for logic and I/O pins. |
| 9 | OSC1/CLKI | input | Oscillator crystal or external clock input; Schmitt-trigger buffer in RC mode, CMOS otherwise. |
| 10 | OSC2/CLKO/RA6 | bidirectional | Oscillator crystal output or clock output (CLKO at 1/4 OSC1 in RC mode); becomes general-purpose I/O RA6 in RCIO/ECIO modes. |
| 11 | RC0/T1OSO/T1CKI | bidirectional | Digital I/O with Schmitt-trigger input, also Timer1 oscillator output and Timer1/Timer3 external clock input. |
| 12 | RC1/T1OSI/CCP2 | bidirectional | Digital I/O with Schmitt-trigger input, also Timer1 oscillator input and Capture2/Compare2/PWM2 pin. |
| 13 | RC2/CCP1 | bidirectional | Digital I/O with Schmitt-trigger input, also Capture1 input / Compare1 output / PWM1 output. |
| 14 | RC3/SCK/SCL | bidirectional | Digital I/O with Schmitt-trigger input, also serial clock input/output for SPI mode and I2C mode. |
| 15 | RC4/SDI/SDA | bidirectional | Digital I/O with Schmitt-trigger input, also SPI data input and I2C data I/O. |
| 16 | RC5/SDO | bidirectional | Digital I/O with Schmitt-trigger input, also SPI data output. |
| 17 | RC6/TX/CK | bidirectional | Digital I/O with Schmitt-trigger input, also USART asynchronous transmit and synchronous clock. |
| 18 | RC7/RX/DT | bidirectional | Digital I/O with Schmitt-trigger input, also USART asynchronous receive and synchronous data. |
| 19 | VSS | power_in | Ground reference for logic and I/O pins. |
| 20 | VDD | power_in | Positive supply for logic and I/O pins. |
| 21 | RB0/INT0 | bidirectional | Digital I/O with TTL input levels (PORTB weak pull-ups programmable), also external interrupt 0 with Schmitt-trigger input. |
| 22 | RB1/INT1 | bidirectional | Digital I/O with TTL input levels (PORTB weak pull-ups programmable), also external interrupt 1. |
| 23 | RB2/INT2 | bidirectional | Digital I/O with TTL input levels (PORTB weak pull-ups programmable), also external interrupt 2. |
| 24 | RB3/CCP2 | bidirectional | Digital I/O with TTL input levels, also Capture2 input, Compare2 output and PWM2 output. |
| 25 | RB4 | bidirectional | Digital I/O with TTL input levels and interrupt-on-change. |
| 26 | RB5/PGM | bidirectional | Digital I/O with interrupt-on-change, also low voltage ICSP programming enable pin. |
| 27 | RB6/PGC | bidirectional | Digital I/O with interrupt-on-change, also In-Circuit Debugger and ICSP programming clock pin. |
| 28 | RB7/PGD | bidirectional | Digital I/O with interrupt-on-change, also In-Circuit Debugger and ICSP programming data pin. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOIC-28-300mil |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 28 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage VDD (PIC18FXX2) | VDD | 4.2 | 5.5 | V | 263 | ||
| Brown-out Reset Voltage BORV=01 (PIC18FXX2) | VBOR | 4.16 | 4.5 | V | D005 BORV1:BORV0 = 01 | 263 | |
| Brown-out Reset Voltage BORV=00 (PIC18FXX2) | VBOR | 4.45 | 4.83 | V | D005 BORV1:BORV0 = 00 | 263 | |
| RAM Data Retention Voltage | VDR | 1.5 | V | 263 | |||
| VDD Start Voltage to ensure Power-on Reset | VPOR | 0.7 | V | D003 | 263 | ||
| VDD Rise Rate to ensure Power-on Reset | SVDD | 0.05 | V/ms | D004 | 263 | ||
| Input Low Voltage I/O ports with TTL buffer | VIL | 0.8 | V | D030A 4.5V <= VDD <= 5.5V | 266 | ||
| Input High Voltage I/O ports with TTL buffer | VIH | 2 | V | D040A 4.5V <= VDD <= 5.5V | 266 | ||
| Output Low Voltage I/O ports | VOL | 0.6 | V | D080 IOL = 8.5 mA, VDD = 4.5V, -40C to +85C | 268 | ||
| Output Low Voltage I/O ports (extended) | VOL | 0.6 | V | D080A IOL = 7.0 mA, VDD = 4.5V, -40C to +125C | 268 | ||
| Output Low Voltage OSC2/CLKO (RC mode) | VOL | 0.6 | V | D083 IOL = 1.6 mA, VDD = 4.5V, -40C to +85C | 268 | ||
| Output Low Voltage OSC2/CLKO (RC mode, extended) | VOL | 0.6 | V | D083A IOL = 1.2 mA, VDD = 4.5V, -40C to +125C | 268 | ||
| PORTB weak pull-up current | IPURB | 50 | 450 | uA | D070 VDD = 5V, VPIN = VSS | 267 | |
| Programming Supply Voltage on MCLR/VPP | VPP | 9 | 13.25 | V | D110 | 270 | |
| Supply Current during Programming | IDDP | 10 | mA | D113 | 270 | ||
| VDD for Read/Write Data EEPROM | VDRW | 5.5 | V | D121 using EECON to read/write; min = VMIN | 270 | ||
| Data EEPROM Erase/Write Cycle Time | TDEW | 4 | ms | D122 | 270 | ||
| Data EEPROM Characteristic Retention | TRETD | 40 | Year | D123 | 270 | ||
| VDD for Read Program FLASH | VPR | 5.5 | V | D131 min = VMIN | 270 | ||
| VDD for Block Erase | VIE | 4.5 | 5.5 | V | D132 using ICSP port | 270 | |
| VDD for Externally Timed Erase or Write | VIW | 4.5 | 5.5 | V | D132A using ICSP port | 270 | |
| VDD for Self-timed Write | VPEW | 5.5 | V | D132B min = VMIN | 270 | ||
| ICSP Block Erase Cycle Time | TIE | 4 | ms | D133 VDD >= 4.5V | 270 | ||
| ICSP Erase or Write Cycle Time (externally timed) | TIW | 1 | ms | D133A VDD >= 4.5V | 270 | ||
| Self-timed Write Cycle Time | TIW | 2 | ms | D133A | 270 | ||
| Program FLASH Characteristic Retention | TRETD | 40 | Year | D134 | 270 | ||
| Power-down Current IPD (PIC18FXX2) | IPD | 0.1 | 0.9 | uA | D020 VDD = 4.2V, +25C | 265 | |
| Power-down Current IPD (PIC18FXX2) | IPD | 3 | 10 | uA | D021B VDD = 4.2V, -40C to +85C | 265 | |
| Power-down Current IPD (PIC18FXX2) | IPD | 15 | 25 | uA | D021B VDD = 4.2V, -40C to +125C | 265 | |
| Watchdog Timer Differential Current | ΔIWDT | 7 | 15 | uA | D022 VDD = 4.2V, +25C | 266 | |
| Watchdog Timer Differential Current | ΔIWDT | 10 | 25 | uA | D022 VDD = 4.2V, -40C to +85C | 266 | |
| Watchdog Timer Differential Current | ΔIWDT | 25 | 40 | uA | D022 VDD = 4.2V, -40C to +125C | 266 | |
| Brown-out Reset Differential Current | ΔIBOR | 36 | 40 | uA | D022A VDD = 4.2V, +25C | 266 | |
| Brown-out Reset Differential Current | ΔIBOR | 36 | 50 | uA | D022A VDD = 4.2V, -40C to +85C | 266 | |
| Brown-out Reset Differential Current | ΔIBOR | 36 | 65 | uA | D022A VDD = 4.2V, -40C to +125C | 266 | |
| Low Voltage Detect Differential Current | ΔILVD | 33 | 40 | uA | D022B VDD = 4.2V, +25C | 266 | |
| Low Voltage Detect Differential Current | ΔILVD | 33 | 50 | uA | D022B VDD = 4.2V, -40C to +85C | 266 | |
| Low Voltage Detect Differential Current | ΔILVD | 33 | 65 | uA | D022B VDD = 4.2V, -40C to +125C | 266 | |
| Timer1 Oscillator Differential Current | ΔITMR1 | 6.5 | 40 | uA | D025 VDD = 4.2V, +25C | 266 | |
| Timer1 Oscillator Differential Current | ΔITMR1 | 6.5 | 50 | uA | D025 VDD = 4.2V, -40C to +85C | 266 | |
| Timer1 Oscillator Differential Current | ΔITMR1 | 6.5 | 65 | uA | D025 VDD = 4.2V, -40C to +125C | 266 | |
| Low Voltage Detect Voltage VLVD (LVV=0001) | VLVD | 1.98 | 2.06 | 2.14 | V | D420 LVV=0001 T >= 25C | 269 |
| Low Voltage Detect Voltage VLVD (LVV=1101) | VLVD | 4.16 | 4.33 | 4.5 | V | D420 LVV=1101 | 269 |
| Low Voltage Detect Voltage VLVD (LVV=1110) | VLVD | 4.45 | 4.64 | 4.83 | V | D420 LVV=1110 | 269 |
| Input Capacitance OSC2 pin | COSC2 | 15 | pF | D100 in XT, HS, LP when external clock drives OSC1 | 268 | ||
| Capacitive Loading All I/O pins and OSC2 (RC mode) | CIO | 50 | pF | D101 to meet AC timing specifications | 268 | ||
| Capacitive Loading SCL, SDA | CB | 400 | pF | D102 in I2C mode | 268 | ||
| Oscillator Frequency RC osc | FOSC | 4 | MHz | Param 1A RC osc | 271 | ||
| PLL Oscillator Frequency Range | FOSC | 4 | 10 | MHz | HS mode only, VDD = 4.2 to 5.5V | 273 | |
| PLL On-chip VCO System Frequency | FSYS | 16 | 40 | MHz | HS mode only | 273 | |
| PLL Start-up Time (Lock Time) | trc | 2 | ms | 273 | |||
| CLKO Stability (Jitter) | ΔCLK | -2 | 2 | % | 273 | ||
| Clock High to Data Out Valid SYNC XMIT PIC18FXXX | TckH2dtV | 50 | ns | Param 120 | 288 | ||
| Clock out rise time and fall time (Master mode) PIC18FXXX | Tckr | 25 | ns | Param 121 | 288 | ||
| Data out rise time and fall time PIC18FXXX | Tdtr | 25 | ns | Param 122 | 288 | ||
| Data hold before CK falling (DT hold time) | TdtV2ckl | 10 | ns | Param 125 | 288 | ||
| Data hold after CK falling PIC18FXXX | TckL2dtl | 15 | ns | Param 126 | 288 | ||
| A/D Resolution | NR | 10 | bit | A01 | 289 | ||
| A/D Reference Voltage VREF (VDD >= 3.0V) | VREF | 3 | V | A20A VDD >= 3.0V | 289 | ||
| Recommended Impedance of Analog Voltage Source | ZAIN | 2.5 | kΩ | A30 | 289 | ||
| VREF Input Current during VAIN acquisition | IREF | 5 | uA | A50 during VAIN acquisition | 289 | ||
| VREF Input Current during A/D conversion cycle | IREF | 150 | uA | A50 during A/D conversion cycle | 289 | ||
| A/D Clock Period PIC18FXXX TOSC based | TAD | 1.6 | 20 | us | Param 130 TOSC based | 290 | |
| A/D Clock Period PIC18FXXX A/D RC mode | TAD | 2 | 6 | us | Param 130 A/D RC mode | 290 | |
| A/D Acquisition Time VREF = VDD = 5.0V | TACQ | 5 | us | Param 132 VREF = VDD = 5.0V | 290 | ||
| A/D Acquisition Time VREF = VDD = 2.5V | TACQ | 10 | us | Param 132 VREF = VDD = 2.5V | 290 | ||
| Voltage on any pin with respect to VSS (except VDD, MCLR, RA4) | -0.3 | V | Absolute maximum, lower limit; upper limit is VDD + 0.3V | 261 | |||
| Voltage on VDD with respect to VSS | -0.3 | 7.5 | V | Absolute maximum | 261 | ||
| Voltage on MCLR with respect to VSS | 0 | 13.25 | V | Absolute maximum, Note 2 | 261 | ||
| Voltage on RA4 with respect to VSS | 0 | 8.5 | V | Absolute maximum | 261 | ||
| Ambient temperature under bias | -55 | 125 | °C | Absolute maximum | 261 | ||
| Storage temperature | -65 | 150 | °C | Absolute maximum | 261 | ||
| Total power dissipation | 1 | W | Absolute maximum, Note 1 | 261 | |||
| Input clamp current | IIK | -20 | 20 | mA | VI < 0 or VI > VDD | 261 | |
| Output clamp current | IOK | -20 | 20 | mA | VO < 0 or VO > VDD | 261 |
CAD (KiCad official)
- Symbol:
PIC18F252T-I - Footprint:
Package_SO:SOIC-28W_7.5x17.9mm_P1.27mm - 3D model: SOIC-28-300mil (KiCad packages3D, STEP)
- 3D model files:
pic18f252t-i-etched.step/pic18f252t-i-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pic18f252t-i.step/pic18f252t-i.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (332 pp, sha256
1ad0654f42af3ab9, retrieved 2026-10-28, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).