Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

PIC18F252T-I

Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · SOIC-28-300mil

PIC18F252T-I from Microchip Tech, in a SOIC-28-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 MCLR/VPP input Active-low master clear (Reset) input; also the high-voltage ICSP programming enable pin (VPP).
2 RA0/AN0 bidirectional General-purpose digital I/O (PORTA, TTL input levels) multiplexed with analog input 0.
3 RA1/AN1 bidirectional General-purpose digital I/O (PORTA, TTL input levels) multiplexed with analog input 1.
4 RA2/AN2/VREF- bidirectional General-purpose digital I/O (PORTA, TTL input levels) multiplexed with analog input 2 and A/D reference voltage (low) input.
5 RA3/AN3/VREF+ bidirectional General-purpose digital I/O (PORTA, TTL input levels) multiplexed with analog input 3 and A/D reference voltage (high) input.
6 RA4/T0CKI bidirectional Digital I/O with Schmitt-trigger input, open drain when configured as output; also Timer0 external clock input.
7 RA5/AN4/SS/LVDIN bidirectional General-purpose digital I/O multiplexed with analog input 4, SPI slave select input and low voltage detect input.
8 VSS power_in Ground reference for logic and I/O pins.
9 OSC1/CLKI input Oscillator crystal or external clock input; Schmitt-trigger buffer in RC mode, CMOS otherwise.
10 OSC2/CLKO/RA6 bidirectional Oscillator crystal output or clock output (CLKO at 1/4 OSC1 in RC mode); becomes general-purpose I/O RA6 in RCIO/ECIO modes.
11 RC0/T1OSO/T1CKI bidirectional Digital I/O with Schmitt-trigger input, also Timer1 oscillator output and Timer1/Timer3 external clock input.
12 RC1/T1OSI/CCP2 bidirectional Digital I/O with Schmitt-trigger input, also Timer1 oscillator input and Capture2/Compare2/PWM2 pin.
13 RC2/CCP1 bidirectional Digital I/O with Schmitt-trigger input, also Capture1 input / Compare1 output / PWM1 output.
14 RC3/SCK/SCL bidirectional Digital I/O with Schmitt-trigger input, also serial clock input/output for SPI mode and I2C mode.
15 RC4/SDI/SDA bidirectional Digital I/O with Schmitt-trigger input, also SPI data input and I2C data I/O.
16 RC5/SDO bidirectional Digital I/O with Schmitt-trigger input, also SPI data output.
17 RC6/TX/CK bidirectional Digital I/O with Schmitt-trigger input, also USART asynchronous transmit and synchronous clock.
18 RC7/RX/DT bidirectional Digital I/O with Schmitt-trigger input, also USART asynchronous receive and synchronous data.
19 VSS power_in Ground reference for logic and I/O pins.
20 VDD power_in Positive supply for logic and I/O pins.
21 RB0/INT0 bidirectional Digital I/O with TTL input levels (PORTB weak pull-ups programmable), also external interrupt 0 with Schmitt-trigger input.
22 RB1/INT1 bidirectional Digital I/O with TTL input levels (PORTB weak pull-ups programmable), also external interrupt 1.
23 RB2/INT2 bidirectional Digital I/O with TTL input levels (PORTB weak pull-ups programmable), also external interrupt 2.
24 RB3/CCP2 bidirectional Digital I/O with TTL input levels, also Capture2 input, Compare2 output and PWM2 output.
25 RB4 bidirectional Digital I/O with TTL input levels and interrupt-on-change.
26 RB5/PGM bidirectional Digital I/O with interrupt-on-change, also low voltage ICSP programming enable pin.
27 RB6/PGC bidirectional Digital I/O with interrupt-on-change, also In-Circuit Debugger and ICSP programming clock pin.
28 RB7/PGD bidirectional Digital I/O with interrupt-on-change, also In-Circuit Debugger and ICSP programming data pin.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package SOIC-28-300mil
Category Single Chip Microcomputer/Microcontroller
Pins 28

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Voltage VDD (PIC18FXX2) VDD 4.2 5.5 V 263
Brown-out Reset Voltage BORV=01 (PIC18FXX2) VBOR 4.16 4.5 V D005 BORV1:BORV0 = 01 263
Brown-out Reset Voltage BORV=00 (PIC18FXX2) VBOR 4.45 4.83 V D005 BORV1:BORV0 = 00 263
RAM Data Retention Voltage VDR 1.5 V 263
VDD Start Voltage to ensure Power-on Reset VPOR 0.7 V D003 263
VDD Rise Rate to ensure Power-on Reset SVDD 0.05 V/ms D004 263
Input Low Voltage I/O ports with TTL buffer VIL 0.8 V D030A 4.5V <= VDD <= 5.5V 266
Input High Voltage I/O ports with TTL buffer VIH 2 V D040A 4.5V <= VDD <= 5.5V 266
Output Low Voltage I/O ports VOL 0.6 V D080 IOL = 8.5 mA, VDD = 4.5V, -40C to +85C 268
Output Low Voltage I/O ports (extended) VOL 0.6 V D080A IOL = 7.0 mA, VDD = 4.5V, -40C to +125C 268
Output Low Voltage OSC2/CLKO (RC mode) VOL 0.6 V D083 IOL = 1.6 mA, VDD = 4.5V, -40C to +85C 268
Output Low Voltage OSC2/CLKO (RC mode, extended) VOL 0.6 V D083A IOL = 1.2 mA, VDD = 4.5V, -40C to +125C 268
PORTB weak pull-up current IPURB 50 450 uA D070 VDD = 5V, VPIN = VSS 267
Programming Supply Voltage on MCLR/VPP VPP 9 13.25 V D110 270
Supply Current during Programming IDDP 10 mA D113 270
VDD for Read/Write Data EEPROM VDRW 5.5 V D121 using EECON to read/write; min = VMIN 270
Data EEPROM Erase/Write Cycle Time TDEW 4 ms D122 270
Data EEPROM Characteristic Retention TRETD 40 Year D123 270
VDD for Read Program FLASH VPR 5.5 V D131 min = VMIN 270
VDD for Block Erase VIE 4.5 5.5 V D132 using ICSP port 270
VDD for Externally Timed Erase or Write VIW 4.5 5.5 V D132A using ICSP port 270
VDD for Self-timed Write VPEW 5.5 V D132B min = VMIN 270
ICSP Block Erase Cycle Time TIE 4 ms D133 VDD >= 4.5V 270
ICSP Erase or Write Cycle Time (externally timed) TIW 1 ms D133A VDD >= 4.5V 270
Self-timed Write Cycle Time TIW 2 ms D133A 270
Program FLASH Characteristic Retention TRETD 40 Year D134 270
Power-down Current IPD (PIC18FXX2) IPD 0.1 0.9 uA D020 VDD = 4.2V, +25C 265
Power-down Current IPD (PIC18FXX2) IPD 3 10 uA D021B VDD = 4.2V, -40C to +85C 265
Power-down Current IPD (PIC18FXX2) IPD 15 25 uA D021B VDD = 4.2V, -40C to +125C 265
Watchdog Timer Differential Current ΔIWDT 7 15 uA D022 VDD = 4.2V, +25C 266
Watchdog Timer Differential Current ΔIWDT 10 25 uA D022 VDD = 4.2V, -40C to +85C 266
Watchdog Timer Differential Current ΔIWDT 25 40 uA D022 VDD = 4.2V, -40C to +125C 266
Brown-out Reset Differential Current ΔIBOR 36 40 uA D022A VDD = 4.2V, +25C 266
Brown-out Reset Differential Current ΔIBOR 36 50 uA D022A VDD = 4.2V, -40C to +85C 266
Brown-out Reset Differential Current ΔIBOR 36 65 uA D022A VDD = 4.2V, -40C to +125C 266
Low Voltage Detect Differential Current ΔILVD 33 40 uA D022B VDD = 4.2V, +25C 266
Low Voltage Detect Differential Current ΔILVD 33 50 uA D022B VDD = 4.2V, -40C to +85C 266
Low Voltage Detect Differential Current ΔILVD 33 65 uA D022B VDD = 4.2V, -40C to +125C 266
Timer1 Oscillator Differential Current ΔITMR1 6.5 40 uA D025 VDD = 4.2V, +25C 266
Timer1 Oscillator Differential Current ΔITMR1 6.5 50 uA D025 VDD = 4.2V, -40C to +85C 266
Timer1 Oscillator Differential Current ΔITMR1 6.5 65 uA D025 VDD = 4.2V, -40C to +125C 266
Low Voltage Detect Voltage VLVD (LVV=0001) VLVD 1.98 2.06 2.14 V D420 LVV=0001 T >= 25C 269
Low Voltage Detect Voltage VLVD (LVV=1101) VLVD 4.16 4.33 4.5 V D420 LVV=1101 269
Low Voltage Detect Voltage VLVD (LVV=1110) VLVD 4.45 4.64 4.83 V D420 LVV=1110 269
Input Capacitance OSC2 pin COSC2 15 pF D100 in XT, HS, LP when external clock drives OSC1 268
Capacitive Loading All I/O pins and OSC2 (RC mode) CIO 50 pF D101 to meet AC timing specifications 268
Capacitive Loading SCL, SDA CB 400 pF D102 in I2C mode 268
Oscillator Frequency RC osc FOSC 4 MHz Param 1A RC osc 271
PLL Oscillator Frequency Range FOSC 4 10 MHz HS mode only, VDD = 4.2 to 5.5V 273
PLL On-chip VCO System Frequency FSYS 16 40 MHz HS mode only 273
PLL Start-up Time (Lock Time) trc 2 ms 273
CLKO Stability (Jitter) ΔCLK -2 2 % 273
Clock High to Data Out Valid SYNC XMIT PIC18FXXX TckH2dtV 50 ns Param 120 288
Clock out rise time and fall time (Master mode) PIC18FXXX Tckr 25 ns Param 121 288
Data out rise time and fall time PIC18FXXX Tdtr 25 ns Param 122 288
Data hold before CK falling (DT hold time) TdtV2ckl 10 ns Param 125 288
Data hold after CK falling PIC18FXXX TckL2dtl 15 ns Param 126 288
A/D Resolution NR 10 bit A01 289
A/D Reference Voltage VREF (VDD >= 3.0V) VREF 3 V A20A VDD >= 3.0V 289
Recommended Impedance of Analog Voltage Source ZAIN 2.5 kΩ A30 289
VREF Input Current during VAIN acquisition IREF 5 uA A50 during VAIN acquisition 289
VREF Input Current during A/D conversion cycle IREF 150 uA A50 during A/D conversion cycle 289
A/D Clock Period PIC18FXXX TOSC based TAD 1.6 20 us Param 130 TOSC based 290
A/D Clock Period PIC18FXXX A/D RC mode TAD 2 6 us Param 130 A/D RC mode 290
A/D Acquisition Time VREF = VDD = 5.0V TACQ 5 us Param 132 VREF = VDD = 5.0V 290
A/D Acquisition Time VREF = VDD = 2.5V TACQ 10 us Param 132 VREF = VDD = 2.5V 290
Voltage on any pin with respect to VSS (except VDD, MCLR, RA4) -0.3 V Absolute maximum, lower limit; upper limit is VDD + 0.3V 261
Voltage on VDD with respect to VSS -0.3 7.5 V Absolute maximum 261
Voltage on MCLR with respect to VSS 0 13.25 V Absolute maximum, Note 2 261
Voltage on RA4 with respect to VSS 0 8.5 V Absolute maximum 261
Ambient temperature under bias -55 125 °C Absolute maximum 261
Storage temperature -65 150 °C Absolute maximum 261
Total power dissipation 1 W Absolute maximum, Note 1 261
Input clamp current IIK -20 20 mA VI < 0 or VI > VDD 261
Output clamp current IOK -20 20 mA VO < 0 or VO > VDD 261

CAD (KiCad official)

  • Symbol: PIC18F252T-I
  • Footprint: Package_SO:SOIC-28W_7.5x17.9mm_P1.27mm
  • 3D model: SOIC-28-300mil (KiCad packages3D, STEP)
  • 3D model files: pic18f252t-i-etched.step / pic18f252t-i-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); pic18f252t-i.step / pic18f252t-i.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (332 pp, sha256 1ad0654f42af3ab9, retrieved 2026-10-28, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF