component
74HC377PW-Q100J
Public Made by Adomby adom
Nexperia Flip Flops, TSSOP-20. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdown74HC377PW-Q100J
Nexperia · Flip Flops · TSSOP-20
74HC377PW-Q100J from Nexperia, in a TSSOP-20. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | E | input | Data enable input (active LOW): when LOW, the outputs Qn take the state of their Dn inputs that meet set-up and hold time on the LOW-to-HIGH CP transition, and E must be stable one set-up time before that transition. |
| 2 | Q0 | output | Flip-flop output 0. |
| 3 | D0 | input | Data input 0, sampled on the LOW-to-HIGH clock transition when E is LOW; inputs include clamp diodes that allow current-limited interfacing to voltages above VCC. |
| 4 | D1 | input | Data input 1, sampled on the LOW-to-HIGH clock transition when E is LOW; inputs include clamp diodes that allow current-limited interfacing to voltages above VCC. |
| 5 | Q1 | output | Flip-flop output 1. |
| 6 | Q2 | output | Flip-flop output 2. |
| 7 | D2 | input | Data input 2, sampled on the LOW-to-HIGH clock transition when E is LOW; inputs include clamp diodes that allow current-limited interfacing to voltages above VCC. |
| 8 | D3 | input | Data input 3, sampled on the LOW-to-HIGH clock transition when E is LOW; inputs include clamp diodes that allow current-limited interfacing to voltages above VCC. |
| 9 | Q3 | output | Flip-flop output 3. |
| 10 | GND | power_in | Ground (0 V). |
| 11 | CP | input | Clock input, edge triggered on the LOW-to-HIGH transition; common clock for all eight flip-flops. |
| 12 | Q4 | output | Flip-flop output 4. |
| 13 | D4 | input | Data input 4, sampled on the LOW-to-HIGH clock transition when E is LOW; inputs include clamp diodes that allow current-limited interfacing to voltages above VCC. |
| 14 | D5 | input | Data input 5, sampled on the LOW-to-HIGH clock transition when E is LOW; inputs include clamp diodes that allow current-limited interfacing to voltages above VCC. |
| 15 | Q5 | output | Flip-flop output 5. |
| 16 | Q6 | output | Flip-flop output 6. |
| 17 | D6 | input | Data input 6, sampled on the LOW-to-HIGH clock transition when E is LOW; inputs include clamp diodes that allow current-limited interfacing to voltages above VCC. |
| 18 | D7 | input | Data input 7, sampled on the LOW-to-HIGH clock transition when E is LOW; inputs include clamp diodes that allow current-limited interfacing to voltages above VCC. |
| 19 | Q7 | output | Flip-flop output 7. |
| 20 | VCC | power_in | Supply voltage; recommended range 2.0 V to 6.0 V for 74HC377-Q100 and 4.5 V to 5.5 V for 74HCT377-Q100, with absolute maximum of +7 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Nexperia |
| Package | TSSOP-20 |
| Category | Logic |
| Pins | 20 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VCC | 2 | 5 | 6 | V | 4 | |
| Input voltage | VI | 0 | V | 4 | |||
| Output voltage | VO | 0 | V | 4 | |||
| Ambient temperature | Tamb | -40 | 125 | °C | 4 | ||
| Input transition rise and fall rate | Δt/ΔV | 625 | ns/V | VCC = 2.0 V | 4 | ||
| Input transition rise and fall rate | Δt/ΔV | 1.67 | 139 | ns/V | VCC = 4.5 V | 4 | |
| Input transition rise and fall rate | Δt/ΔV | 83 | ns/V | VCC = 6.0 V | 4 | ||
| Supply voltage | VCC | -0.5 | 7 | V | 4 | ||
| Input clamping current | IIK | -20 | 20 | mA | VI < -0.5 V or VI > VCC + 0.5 V | 4 | |
| Output clamping current | IOK | -20 | 20 | mA | VO < -0.5 V or VO > VCC + 0.5 V | 4 | |
| Output current | IO | -25 | 25 | mA | -0.5 V < VO < VCC + 0.5 V | 4 | |
| Supply current | ICC | 50 | mA | 4 | |||
| Ground current | IGND | -50 | mA | 4 | |||
| Storage temperature | Tstg | -65 | 150 | °C | 4 | ||
| Total power dissipation | Ptot | 500 | mW | Tamb = -40 °C to +125 °C | 4 | ||
| HIGH-level input voltage | VIH | 1.5 | 1.2 | V | VCC = 2.0 V; Tamb -40 °C to +85 °C; typ at 25 °C | 5 | |
| HIGH-level input voltage | VIH | 3.15 | 2.4 | V | VCC = 4.5 V; Tamb -40 °C to +85 °C; typ at 25 °C | 5 | |
| HIGH-level input voltage | VIH | 4.2 | 3.2 | V | VCC = 6.0 V; Tamb -40 °C to +85 °C; typ at 25 °C | 5 | |
| LOW-level input voltage | VIL | 0.8 | 0.5 | V | VCC = 2.0 V; Tamb -40 °C to +85 °C; typ at 25 °C | 5 | |
| LOW-level input voltage | VIL | 2.1 | 1.35 | V | VCC = 4.5 V; Tamb -40 °C to +85 °C; typ at 25 °C | 5 | |
| LOW-level input voltage | VIL | 2.8 | 1.8 | V | VCC = 6.0 V; Tamb -40 °C to +85 °C; typ at 25 °C | 5 | |
| HIGH-level output voltage | VOH | 1.9 | 2 | V | VI = VIH or VIL; IO = -20 μA; VCC = 2.0 V; Tamb -40 °C to +85 °C; typ at 25 °C | 5 | |
| HIGH-level output voltage | VOH | 4.4 | 4.5 | V | VI = VIH or VIL; IO = -20 μA; VCC = 4.5 V; Tamb -40 °C to +85 °C; typ at 25 °C | 5 | |
| HIGH-level output voltage | VOH | 5.9 | 6 | V | VI = VIH or VIL; IO = -20 μA; VCC = 6.0 V; Tamb -40 °C to +85 °C; typ at 25 °C | 5 | |
| HIGH-level output voltage | VOH | 3.84 | 4.32 | V | VI = VIH or VIL; IO = -4.0 mA; VCC = 4.5 V; Tamb -40 °C to +85 °C; typ at 25 °C | 5 | |
| HIGH-level output voltage | VOH | 5.34 | 5.81 | V | VI = VIH or VIL; IO = -5.2 mA; VCC = 6.0 V; Tamb -40 °C to +85 °C; typ at 25 °C | 5 | |
| LOW-level output voltage | VOL | 0 | 0.1 | V | VI = VIH or VIL; IO = 20 μA; VCC = 2.0 V; Tamb -40 °C to +85 °C; typ at 25 °C | 5 | |
| LOW-level output voltage | VOL | 0.15 | 0.33 | V | VI = VIH or VIL; IO = 4.0 mA; VCC = 4.5 V; Tamb -40 °C to +85 °C; typ at 25 °C | 5 | |
| LOW-level output voltage | VOL | 0.16 | 0.33 | V | VI = VIH or VIL; IO = 5.2 mA; VCC = 6.0 V; Tamb -40 °C to +85 °C; typ at 25 °C | 5 | |
| Input leakage current | II | -1 | 1 | μA | VI = VCC or GND; VCC = 6.0 V; Tamb -40 °C to +85 °C | 5 | |
| Supply current | ICC | 80 | μA | VI = VCC or GND; IO = 0 A; VCC = 6.0 V; Tamb -40 °C to +85 °C | 5 | ||
| CP to Qn propagation delay | tpd | 44 | 200 | ns | VCC = 2.0 V; CL = 50 pF; Tamb -40 °C to +85 °C; typ at 25 °C; see Fig. 6 | 7 | |
| CP to Qn propagation delay | tpd | 16 | 40 | ns | VCC = 4.5 V; CL = 50 pF; Tamb -40 °C to +85 °C; typ at 25 °C; see Fig. 6 | 7 | |
| CP to Qn propagation delay | tpd | 13 | 34 | ns | VCC = 6.0 V; CL = 50 pF; Tamb -40 °C to +85 °C; typ at 25 °C; see Fig. 6 | 7 | |
| Qn output transition time | tt | 19 | 95 | ns | VCC = 2.0 V; CL = 50 pF; Tamb -40 °C to +85 °C; typ at 25 °C; see Fig. 6 | 7 | |
| Qn output transition time | tt | 7 | 19 | ns | VCC = 4.5 V; CL = 50 pF; Tamb -40 °C to +85 °C; typ at 25 °C; see Fig. 6 | 7 | |
| Qn output transition time | tt | 6 | 16 | ns | VCC = 6.0 V; CL = 50 pF; Tamb -40 °C to +85 °C; typ at 25 °C; see Fig. 6 | 7 | |
| CP pulse width HIGH or LOW | tW | 100 | 14 | ns | VCC = 2.0 V; CL = 50 pF; Tamb -40 °C to +85 °C; typ at 25 °C; see Fig. 6 | 7 | |
| CP pulse width HIGH or LOW | tW | 20 | 5 | ns | VCC = 4.5 V; CL = 50 pF; Tamb -40 °C to +85 °C; typ at 25 °C; see Fig. 6 | 7 | |
| CP pulse width HIGH or LOW | tW | 17 | 4 | ns | VCC = 6.0 V; CL = 50 pF; Tamb -40 °C to +85 °C; typ at 25 °C; see Fig. 6 | 7 | |
| Dn data set-up time to CP | tsu | 75 | 14 | ns | VCC = 2.0 V; CL = 50 pF; Tamb -40 °C to +85 °C; typ at 25 °C; see Fig. 7 | 7 | |
| Dn data set-up time to CP | tsu | 15 | 5 | ns | VCC = 4.5 V; CL = 50 pF; Tamb -40 °C to +85 °C; typ at 25 °C; see Fig. 7 | 7 | |
| Dn data set-up time to CP | tsu | 13 | 4 | ns | VCC = 6.0 V; CL = 50 pF; Tamb -40 °C to +85 °C; typ at 25 °C; see Fig. 7 | 7 | |
| E enable set-up time to CP | tsu | 75 | 6 | ns | VCC = 2.0 V; CL = 50 pF; Tamb -40 °C to +85 °C; typ at 25 °C; see Fig. 7 | 7 | |
| E enable set-up time to CP | tsu | 15 | 2 | ns | VCC = 4.5 V; CL = 50 pF; Tamb -40 °C to +85 °C; typ at 25 °C; see Fig. 7 | 7 | |
| E enable set-up time to CP | tsu | 13 | 2 | ns | VCC = 6.0 V; CL = 50 pF; Tamb -40 °C to +85 °C; typ at 25 °C; see Fig. 7 | 7 | |
| Dn data hold time from CP | th | 3 | -8 | ns | VCC = 2.0 V; CL = 50 pF; Tamb -40 °C to +85 °C; typ at 25 °C; see Fig. 7 | 7 | |
| Dn data hold time from CP | th | 3 | -3 | ns | VCC = 4.5 V; CL = 50 pF; Tamb -40 °C to +85 °C; typ at 25 °C; see Fig. 7 | 7 | |
| Dn data hold time from CP | th | 3 | -2 | ns | VCC = 6.0 V; CL = 50 pF; Tamb -40 °C to +85 °C; typ at 25 °C; see Fig. 7 | 7 | |
| E enable hold time from CP | th | 4 | -3 | ns | VCC = 2.0 V; CL = 50 pF; Tamb -40 °C to +85 °C; typ at 25 °C; see Fig. 7 | 7 | |
| E enable hold time from CP | th | 4 | -1 | ns | VCC = 4.5 V; CL = 50 pF; Tamb -40 °C to +85 °C; typ at 25 °C; see Fig. 7 | 7 | |
| Maximum clock frequency | fmax | 5 | 23 | MHz | VCC = 2.0 V; CL = 50 pF; Tamb -40 °C to +85 °C; typ at 25 °C; see Fig. 6 | 7 | |
| Maximum clock frequency | fmax | 24 | 70 | MHz | VCC = 4.5 V; CL = 50 pF; Tamb -40 °C to +85 °C; typ at 25 °C; see Fig. 6 | 7 | |
| Maximum clock frequency | fmax | 28 | 83 | MHz | VCC = 6.0 V; CL = 50 pF; Tamb -40 °C to +85 °C; typ at 25 °C; see Fig. 6 | 7 |
CAD (KiCad official)
- Symbol:
74HC377PW-Q100J - Footprint:
Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm - 3D model: TSSOP-20 (KiCad packages3D, STEP)
- 3D model files:
74hc377pw-q100j-etched.step/74hc377pw-q100j-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);74hc377pw-q100j.step/74hc377pw-q100j.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Nexperia datasheet (15 pp, sha256
d015fe837c9c9606, retrieved 2026-10-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).