3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownMCP73843-420I
Microchip Tech · Pre-ordered MCUs · MSOP-8
MCP73843-420I from Microchip Tech, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SENSE | input | Charge current sense input; the voltage across an external precision sense resistor placed between VDD and the external pass transistor sets the fast charge current (a 220 mΩ resistor gives about 500 mA typical). |
| 2 | VDD | power_in | Battery management input supply; a supply of [VREG(Typ) + 0.3V] to 12V is recommended, bypassed to VSS with a minimum of 4.7 µF. |
| 3 | STAT1 | output | Charge status output; current-limited open-drain drive for a direct LED connection, or use a pull-up resistor to interface to a host microcontroller. |
| 4 | EN | input | Logic enable input used to force charge termination, initiate charge, clear faults or disable automatic recharge. |
| 5 | TIMER | passive | Timer set pin; all safety timers are scaled by CTIMER/0.1 µF. |
| 6 | VSS | power_in | Battery management 0V reference; connect to the negative terminal of the battery. |
| 7 | VBAT | power_in | Battery voltage sense input; connect to the positive battery terminal and bypass to VSS with a minimum of 4.7 µF for loop stability, with the internal divider regulating this pin to VREG. |
| 8 | DRV | output | Direct output drive of an external P-channel MOSFET for current and voltage regulation. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | MSOP-8 |
| Category | Embedded Processors & Controllers |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage | VDD | 4.5 | 12 | V | MCP73843 | 3 | |
| Supply Current, Disabled | ISS | 0.25 | 4 | µA | Disabled | 3 | |
| Supply Current, Operating | ISS | 0.75 | 4 | mA | Operating, VDD =VREG(Typ)+1V | 3 | |
| UVLO Start Threshold | VSTART | 4.25 | 4.45 | 4.6 | V | VDD Low-to-High | 3 |
| UVLO Stop Threshold | VSTOP | 4.2 | 4.4 | 4.55 | V | VDD High-to-Low | 3 |
| Regulated Output Voltage | VREG | 4.179 | 4.2 | 4.221 | V | VDD = [VREG(Typ)+1V], IOUT = 10 mA, TA = -5°C to +55°C | 3 |
| Line Regulation | /ΔVBAT/VBAT//ΔVDD | 0.025 | 0.25 | %/V | VDD = [VREG(Typ)+1V] to 12V, IOUT = 10 mA | 3 | |
| Load Regulation | /ΔVBAT//VBAT | 0.01 | 0.25 | % | IOUT = 10 mA to 150 mA, VDD = [VREG(Typ)+1V] | 3 | |
| Output Reverse Leakage Current | IDISCHARGE | 0.4 | 1 | µA | VDD Floating, VBAT = VREG(Typ) | 3 | |
| Fast Charge Current Regulation Threshold | VFCS | 100 | 110 | 120 | mV | VDD, VSENSE, TA = -5°C to +55°C | 3 |
| Precondition Current Regulation Threshold | VPCS | 5 | 10 | 15 | mV | VDD, VSENSE, TA = -5°C to +55°C | 4 |
| Precondition Threshold Voltage | VPTH | 2.75 | 2.85 | 2.95 | V | VBAT Low-to-High | 4 |
| Charge Termination Threshold | VTCS | 4 | 7 | 10 | mV | VDD, VSENSE, TA = -5°C to +55°C | 4 |
| Gate Drive Minimum Voltage | VDRVMIN | 1 | V | VDD = 4.5V | 4 | ||
| Gate - Source Clamp Voltage | VGS | -7 | -4.5 | V | VDD = 12.0V | 4 | |
| Status Sink Current | ISINK | 4 | 7 | 12 | mA | 4 | |
| Status Low Output Voltage | VOL | 200 | 400 | mV | ISINK = 1 mA | 4 | |
| Status Input Leakage Current | ILK | 0.01 | 1 | µA | ISINK = 0 mA, VSTAT1 = 12V | 4 | |
| Enable Input High-Voltage Level | VIH | 1.4 | V | 5 | |||
| Enable Input Low-Voltage Level | VIL | 0.8 | V | 5 | |||
| Enable Input Leakage Current | ILK | 0.01 | 1 | µA | VENABLE = 12V | 5 | |
| UVLO Start Delay | tSTART | 5 | msec | VDD Low-to-High | 5 | ||
| Transition Time Out of Preconditioning | tDELAY | 1 | msec | VBAT< VPTH to VBAT > VPTH | 5 | ||
| Current Rise Time Out of Preconditioning | tRISE | 1 | msec | IOUT Rising to 90% of IREG | 5 | ||
| Fast Charge Safety Timer Period | tFAST | 1.1 | 1.5 | 1.9 | Hours | CTIMER = 0.1 µF | 5 |
| Preconditioning Charge Safety Timer Period | tPRECON | 45 | 60 | 75 | Minutes | CTIMER = 0.1 µF | 5 |
| Elapsed Time Termination Period | tTERM | 2.2 | 3 | 3.8 | Hours | CTIMER = 0.1 µF | 5 |
| Status Output turn-off | tOFF | 200 | µsec | ISINK = 10 mA to 0 mA | 5 | ||
| Status Output turn-on | tON | 200 | µsec | ISINK = 0 mA to 10 mA | 5 | ||
| Specified Temperature Range | TA | -40 | 85 | °C | 5 | ||
| Operating Temperature Range | TA | -40 | 125 | °C | 5 | ||
| Storage Temperature Range | TA | -65 | 150 | °C | 5 | ||
| Thermal Resistance, MSOP-8 | θJA | 206 | °C/W | Single-Layer SEMI G42-88 Board, Natural Convection | 5 | ||
| Inputs and outputs w.r.t. VSS | -0.3 | V | to (VDD+0.3)V | 3 | |||
| Current at DRV Pin | -4 | 4 | mA | 3 | |||
| Current at STAT1 Pin | -30 | 30 | mA | 3 | |||
| Maximum Junction Temperature | TJ | 150 | °C | 3 | |||
| Storage temperature | -65 | 150 | °C | 3 | |||
| ESD HBM | 2 | kV | 1.5 k in Series with 100 pF | 3 | |||
| ESD MM | 200 | V | 200 pF, No Series Resistance | 3 | |||
| Supply Ripple Attenuation | PSRR | -58 | dB | IOUT = 10 mA, 100 Hz | 3 | ||
| Gate Drive Current Sink | IDRV | 2 | mA | Sink, CV Mode | 4 | ||
| Gate Drive Current Source | IDRV | -0.5 | mA | Source, CV Mode | 4 |
CAD (KiCad official)
- Symbol:
MCP73843-420I - Footprint:
Package_SO:MSOP-8_3x3mm_P0.65mm - 3D model: MSOP-8 (KiCad packages3D, STEP)
- 3D model files:
mcp73843-420i-etched.step/mcp73843-420i-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mcp73843-420i.step/mcp73843-420i.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (26 pp, sha256
da2a0f52e1435a78, retrieved 2026-10-31, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).