main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers mcp73843-420i: viewers · Ray
mcp73843-420i-etched.glb Publish 0.1.0 · Ray
mcp73843-420i-etched.step mcp73843-420i: factory component page (tier=mfr) · Ray
mcp73843-420i-hero.glb mcp73843-420i: hero GLB from the etched model (keeps the MPN mark) · Ray
mcp73843-420i-hero.overlay.json Publish 0.1.0 · Ray
mcp73843-420i.glb Publish 0.1.0 · Ray
mcp73843-420i.kicad_mod Publish 0.1.0 · Ray
mcp73843-420i.kicad_sym Publish 0.1.0 · Ray
mcp73843-420i.lbr Publish 0.1.0 · Ray
mcp73843-420i.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray

MCP73843-420I

Microchip Tech · Pre-ordered MCUs · MSOP-8

MCP73843-420I from Microchip Tech, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 SENSE input Charge current sense input; the voltage across an external precision sense resistor placed between VDD and the external pass transistor sets the fast charge current (a 220 mΩ resistor gives about 500 mA typical).
2 VDD power_in Battery management input supply; a supply of [VREG(Typ) + 0.3V] to 12V is recommended, bypassed to VSS with a minimum of 4.7 µF.
3 STAT1 output Charge status output; current-limited open-drain drive for a direct LED connection, or use a pull-up resistor to interface to a host microcontroller.
4 EN input Logic enable input used to force charge termination, initiate charge, clear faults or disable automatic recharge.
5 TIMER passive Timer set pin; all safety timers are scaled by CTIMER/0.1 µF.
6 VSS power_in Battery management 0V reference; connect to the negative terminal of the battery.
7 VBAT power_in Battery voltage sense input; connect to the positive battery terminal and bypass to VSS with a minimum of 4.7 µF for loop stability, with the internal divider regulating this pin to VREG.
8 DRV output Direct output drive of an external P-channel MOSFET for current and voltage regulation.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package MSOP-8
Category Embedded Processors & Controllers
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Voltage VDD 4.5 12 V MCP73843 3
Supply Current, Disabled ISS 0.25 4 µA Disabled 3
Supply Current, Operating ISS 0.75 4 mA Operating, VDD =VREG(Typ)+1V 3
UVLO Start Threshold VSTART 4.25 4.45 4.6 V VDD Low-to-High 3
UVLO Stop Threshold VSTOP 4.2 4.4 4.55 V VDD High-to-Low 3
Regulated Output Voltage VREG 4.179 4.2 4.221 V VDD = [VREG(Typ)+1V], IOUT = 10 mA, TA = -5°C to +55°C 3
Line Regulation /ΔVBAT/VBAT//ΔVDD 0.025 0.25 %/V VDD = [VREG(Typ)+1V] to 12V, IOUT = 10 mA 3
Load Regulation /ΔVBAT//VBAT 0.01 0.25 % IOUT = 10 mA to 150 mA, VDD = [VREG(Typ)+1V] 3
Output Reverse Leakage Current IDISCHARGE 0.4 1 µA VDD Floating, VBAT = VREG(Typ) 3
Fast Charge Current Regulation Threshold VFCS 100 110 120 mV VDD, VSENSE, TA = -5°C to +55°C 3
Precondition Current Regulation Threshold VPCS 5 10 15 mV VDD, VSENSE, TA = -5°C to +55°C 4
Precondition Threshold Voltage VPTH 2.75 2.85 2.95 V VBAT Low-to-High 4
Charge Termination Threshold VTCS 4 7 10 mV VDD, VSENSE, TA = -5°C to +55°C 4
Gate Drive Minimum Voltage VDRVMIN 1 V VDD = 4.5V 4
Gate - Source Clamp Voltage VGS -7 -4.5 V VDD = 12.0V 4
Status Sink Current ISINK 4 7 12 mA 4
Status Low Output Voltage VOL 200 400 mV ISINK = 1 mA 4
Status Input Leakage Current ILK 0.01 1 µA ISINK = 0 mA, VSTAT1 = 12V 4
Enable Input High-Voltage Level VIH 1.4 V 5
Enable Input Low-Voltage Level VIL 0.8 V 5
Enable Input Leakage Current ILK 0.01 1 µA VENABLE = 12V 5
UVLO Start Delay tSTART 5 msec VDD Low-to-High 5
Transition Time Out of Preconditioning tDELAY 1 msec VBAT< VPTH to VBAT > VPTH 5
Current Rise Time Out of Preconditioning tRISE 1 msec IOUT Rising to 90% of IREG 5
Fast Charge Safety Timer Period tFAST 1.1 1.5 1.9 Hours CTIMER = 0.1 µF 5
Preconditioning Charge Safety Timer Period tPRECON 45 60 75 Minutes CTIMER = 0.1 µF 5
Elapsed Time Termination Period tTERM 2.2 3 3.8 Hours CTIMER = 0.1 µF 5
Status Output turn-off tOFF 200 µsec ISINK = 10 mA to 0 mA 5
Status Output turn-on tON 200 µsec ISINK = 0 mA to 10 mA 5
Specified Temperature Range TA -40 85 °C 5
Operating Temperature Range TA -40 125 °C 5
Storage Temperature Range TA -65 150 °C 5
Thermal Resistance, MSOP-8 θJA 206 °C/W Single-Layer SEMI G42-88 Board, Natural Convection 5
Inputs and outputs w.r.t. VSS -0.3 V to (VDD+0.3)V 3
Current at DRV Pin -4 4 mA 3
Current at STAT1 Pin -30 30 mA 3
Maximum Junction Temperature TJ 150 °C 3
Storage temperature -65 150 °C 3
ESD HBM 2 kV 1.5 k in Series with 100 pF 3
ESD MM 200 V 200 pF, No Series Resistance 3
Supply Ripple Attenuation PSRR -58 dB IOUT = 10 mA, 100 Hz 3
Gate Drive Current Sink IDRV 2 mA Sink, CV Mode 4
Gate Drive Current Source IDRV -0.5 mA Source, CV Mode 4

CAD (KiCad official)

  • Symbol: MCP73843-420I
  • Footprint: Package_SO:MSOP-8_3x3mm_P0.65mm
  • 3D model: MSOP-8 (KiCad packages3D, STEP)
  • 3D model files: mcp73843-420i-etched.step / mcp73843-420i-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mcp73843-420i.step / mcp73843-420i.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (26 pp, sha256 da2a0f52e1435a78, retrieved 2026-10-31, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF