3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownSTM32F429IIT6
STMicroelectronics · Microcontrollers (MCU/MPU/SOC) · LQFP-176(24x24)
STM32F429IIT6 from STMicroelectronics, in a LQFP-176(24x24). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PE2 | bidirectional | 5 V-tolerant I/O; alternate functions TRACECLK, SPI4_SCK, SAI1_MCLK_A, ETH_MII_TXD3, FMC_A23, EVENTOUT. |
| 2 | PE3 | bidirectional | 5 V-tolerant I/O; alternate functions TRACED0, SAI1_SD_B, FMC_A19, EVENTOUT. |
| 3 | PE4 | bidirectional | 5 V-tolerant I/O; alternate functions TRACED1, SPI4_NSS, SAI1_FS_A, FMC_A20, DCMI_D4, LCD_B0, EVENTOUT. |
| 4 | PE5 | bidirectional | 5 V-tolerant I/O; alternate functions TRACED2, TIM9_CH1, SPI4_MISO, SAI1_SCK_A, FMC_A21, DCMI_D6, LCD_G0, EVENTOUT. |
| 5 | PE6 | bidirectional | 5 V-tolerant I/O; alternate functions TRACED3, TIM9_CH2, SPI4_MOSI, SAI1_SD_A, FMC_A22, DCMI_D7, LCD_G1, EVENTOUT. |
| 6 | VBAT | power_in | Backup supply of 1.65 to 3.6 V for the RTC, 32 kHz oscillator and backup registers when VDD is absent; connect to VDD if internal reset is OFF. |
| 7 | PI8 | bidirectional | 5 V-tolerant I/O powered via the backup-domain switch (3 mA sink limit; in output mode max 2 MHz with 30 pF, not usable as current source); function EVENTOUT, additional function TAMP_2. |
| 8 | PC13 | bidirectional | 5 V-tolerant I/O powered via the backup-domain switch (3 mA sink limit; in output mode max 2 MHz with 30 pF, not usable as current source); function EVENTOUT, additional function TAMP_1. |
| 9 | PC14-OSC32_IN | bidirectional | I/O (3 mA limit, max 2 MHz with 30 pF in output mode) that is the 32 kHz oscillator input OSC32_IN; also EVENTOUT. |
| 10 | PC15-OSC32_OUT | bidirectional | I/O (3 mA limit, max 2 MHz with 30 pF in output mode) that is the 32 kHz oscillator output OSC32_OUT; also EVENTOUT. |
| 11 | PI9 | bidirectional | 5 V-tolerant I/O; alternate functions CAN1_RX, FMC_D30, LCD_VSYNC, EVENTOUT. |
| 12 | PI10 | bidirectional | 5 V-tolerant I/O; alternate functions ETH_MII_RX_ER, FMC_D31, LCD_HSYNC, EVENTOUT. |
| 13 | PI11 | bidirectional | 5 V-tolerant I/O; alternate functions OTG_HS_ULPI_DIR, EVENTOUT. |
| 14 | VSS | power_in | Digital ground supply pin. |
| 15 | VDD | power_in | Digital supply pin of 1.7 to 3.6 V for I/O and the internal regulator. |
| 16 | PF0 | bidirectional | 5 V-tolerant I/O; alternate functions I2C2_SDA, FMC_A0, EVENTOUT. |
| 17 | PF1 | bidirectional | 5 V-tolerant I/O; alternate functions I2C2_SCL, FMC_A1, EVENTOUT. |
| 18 | PF2 | bidirectional | 5 V-tolerant I/O; alternate functions I2C2_SMBA, FMC_A2, EVENTOUT. |
| 19 | PF3 | bidirectional | 5 V-tolerant I/O (except in analog mode); alternate functions FMC_A3, EVENTOUT; additional function ADC3_IN9. |
| 20 | PF4 | bidirectional | 5 V-tolerant I/O (except in analog mode); alternate functions FMC_A4, EVENTOUT; additional function ADC3_IN14. |
| 21 | PF5 | bidirectional | 5 V-tolerant I/O (except in analog mode); alternate functions FMC_A5, EVENTOUT; additional function ADC3_IN15. |
| 22 | VSS | power_in | Digital ground supply pin. |
| 23 | VDD | power_in | Digital supply pin of 1.7 to 3.6 V for I/O and the internal regulator. |
| 24 | PF6 | bidirectional | 5 V-tolerant I/O (except in analog mode); alternate functions TIM10_CH1, SPI5_NSS, SAI1_SD_B, UART7_Rx, FMC_NIORD, EVENTOUT; additional function ADC3_IN4. |
| 25 | PF7 | bidirectional | 5 V-tolerant I/O (except in analog mode); alternate functions TIM11_CH1, SPI5_SCK, SAI1_MCLK_B, UART7_Tx, FMC_NREG, EVENTOUT; additional function ADC3_IN5. |
| 26 | PF8 | bidirectional | 5 V-tolerant I/O (except in analog mode); alternate functions SPI5_MISO, SAI1_SCK_B, TIM13_CH1, FMC_NIOWR, EVENTOUT; additional function ADC3_IN6. |
| 27 | PF9 | bidirectional | 5 V-tolerant I/O (except in analog mode); alternate functions SPI5_MOSI, SAI1_FS_B, TIM14_CH1, FMC_CD, EVENTOUT; additional function ADC3_IN7. |
| 28 | PF10 | bidirectional | 5 V-tolerant I/O (except in analog mode); alternate functions FMC_INTR, DCMI_D11, LCD_DE, EVENTOUT; additional function ADC3_IN8. |
| 29 | PH0-OSC_IN | bidirectional | I/O that is the main oscillator input OSC_IN (4 to 26 MHz crystal); also EVENTOUT. |
| 30 | PH1-OSC_OUT | bidirectional | I/O that is the main oscillator output OSC_OUT (4 to 26 MHz crystal); also EVENTOUT. |
| 31 | NRST | bidirectional | Bidirectional reset pin with weak pull-up (30 to 50 kohm); input pulses under 100 ns are filtered and pulses over 300 ns (VDD > 2.7 V) reset the device. |
| 32 | PC0 | bidirectional | 5 V-tolerant I/O (except in analog mode); alternate functions OTG_HS_ULPI_STP, FMC_SDNWE, EVENTOUT; additional function ADC123_IN10. |
| 33 | PC1 | bidirectional | 5 V-tolerant I/O (except in analog mode); alternate functions ETH_MDC, EVENTOUT; additional function ADC123_IN11. |
| 34 | PC2 | bidirectional | 5 V-tolerant I/O (except in analog mode); alternate functions SPI2_MISO, I2S2ext_SD, OTG_HS_ULPI_DIR, ETH_MII_TXD2, FMC_SDNE0, EVENTOUT; additional function ADC123_IN12. |
| 35 | PC3 | bidirectional | 5 V-tolerant I/O (except in analog mode); alternate functions SPI2_MOSI/I2S2_SD, OTG_HS_ULPI_NXT, ETH_MII_TX_CLK, FMC_SDCKE0, EVENTOUT; additional function ADC123_IN13. |
| 36 | VDD | power_in | Digital supply pin of 1.7 to 3.6 V for I/O and the internal regulator. |
| 37 | VSSA | power_in | Analog ground for ADC, DAC, reset block, RC and PLL; must be connected to VSS. |
| 38 | VREF+ | power_in | Positive reference voltage for ADC/DAC, 1.7 to 3.6 V with VDDA - VREF+ < 1.2 V. |
| 39 | VDDA | power_in | Analog supply of 1.7 to 3.6 V for ADC, DAC, reset block, RC and PLL; must be connected to VDD. |
| 40 | PA0-WKUP | bidirectional | 5 V-tolerant I/O; alternate functions TIM2_CH1/TIM2_ETR, TIM5_CH1, TIM8_ETR, USART2_CTS, UART4_TX, ETH_MII_CRS, EVENTOUT; additional functions ADC123_IN0 and WKUP; acts as active-low internal reset when BYPASS_REG is tied to VDD. |
| 41 | PA1 | bidirectional | 5 V-tolerant I/O (except in analog mode); alternate functions TIM2_CH2, TIM5_CH2, USART2_RTS, UART4_RX, ETH_MII_RX_CLK/ETH_RMII_REF_CLK, EVENTOUT; additional function ADC123_IN1. |
| 42 | PA2 | bidirectional | 5 V-tolerant I/O (except in analog mode); alternate functions TIM2_CH3, TIM5_CH3, TIM9_CH1, USART2_TX, ETH_MDIO, EVENTOUT; additional function ADC123_IN2. |
| 43 | PH2 | bidirectional | 5 V-tolerant I/O; alternate functions ETH_MII_CRS, FMC_SDCKE0, LCD_R0, EVENTOUT. |
| 44 | PH3 | bidirectional | 5 V-tolerant I/O; alternate functions ETH_MII_COL, FMC_SDNE0, LCD_R1, EVENTOUT. |
| 45 | PH4 | bidirectional | 5 V-tolerant I/O; alternate functions I2C2_SCL, OTG_HS_ULPI_NXT, EVENTOUT. |
| 46 | PH5 | bidirectional | 5 V-tolerant I/O; alternate functions I2C2_SDA, SPI5_NSS, FMC_SDNWE, EVENTOUT. |
| 47 | PA3 | bidirectional | 5 V-tolerant I/O (except in analog mode); alternate functions TIM2_CH4, TIM5_CH4, TIM9_CH2, USART2_RX, OTG_HS_ULPI_D0, ETH_MII_COL, LCD_B5, EVENTOUT; additional function ADC123_IN3. |
| 48 | BYPASS_REG | input | Regulator bypass input: held low enables the internal voltage regulator, held high disables it (regulator OFF). |
| 49 | VDD | power_in | Digital supply pin of 1.7 to 3.6 V for I/O and the internal regulator. |
| 50 | PA4 | bidirectional | 3.3 V-tolerant TTa I/O (except in analog mode); alternate functions SPI1_NSS, SPI3_NSS/I2S3_WS, USART2_CK, OTG_HS_SOF, DCMI_HSYNC, LCD_VSYNC, EVENTOUT; additional functions ADC12_IN4 and DAC_OUT1. |
| 51 | PA5 | bidirectional | 3.3 V-tolerant TTa I/O (except in analog mode); alternate functions TIM2_CH1/TIM2_ETR, TIM8_CH1N, SPI1_SCK, OTG_HS_ULPI_CK, EVENTOUT; additional functions ADC12_IN5 and DAC_OUT2. |
| 52 | PA6 | bidirectional | 5 V-tolerant I/O (except in analog mode); alternate functions TIM1_BKIN, TIM3_CH1, TIM8_BKIN, SPI1_MISO, TIM13_CH1, DCMI_PIXCLK, LCD_G2, EVENTOUT; additional function ADC12_IN6. |
| 53 | PA7 | bidirectional | 5 V-tolerant I/O (except in analog mode); alternate functions TIM1_CH1N, TIM3_CH2, TIM8_CH1N, SPI1_MOSI, TIM14_CH1, ETH_MII_RX_DV/ETH_RMII_CRS_DV, EVENTOUT; additional function ADC12_IN7. |
| 54 | PC4 | bidirectional | 5 V-tolerant I/O (except in analog mode); alternate functions ETH_MII_RXD0/ETH_RMII_RXD0, EVENTOUT; additional function ADC12_IN14. |
| 55 | PC5 | bidirectional | 5 V-tolerant I/O (except in analog mode); alternate functions ETH_MII_RXD1/ETH_RMII_RXD1, EVENTOUT; additional function ADC12_IN15. |
| 56 | PB0 | bidirectional | 5 V-tolerant I/O (except in analog mode); alternate functions TIM1_CH2N, TIM3_CH3, TIM8_CH2N, LCD_R3, OTG_HS_ULPI_D1, ETH_MII_RXD2, EVENTOUT; additional function ADC12_IN8. |
| 57 | PB1 | bidirectional | 5 V-tolerant I/O (except in analog mode); alternate functions TIM1_CH3N, TIM3_CH4, TIM8_CH3N, LCD_R6, OTG_HS_ULPI_D2, ETH_MII_RXD3, EVENTOUT; additional function ADC12_IN9. |
| 58 | PB2-BOOT1 | bidirectional | 5 V-tolerant I/O that also serves as BOOT1 boot-mode selection; function EVENTOUT. |
| 59 | PF11 | bidirectional | 5 V-tolerant I/O; alternate functions SPI5_MOSI, FMC_SDNRAS, DCMI_D12, EVENTOUT. |
| 60 | PF12 | bidirectional | 5 V-tolerant I/O; alternate functions FMC_A6, EVENTOUT. |
| 61 | VSS | power_in | Digital ground supply pin. |
| 62 | VDD | power_in | Digital supply pin of 1.7 to 3.6 V for I/O and the internal regulator. |
| 63 | PF13 | bidirectional | 5 V-tolerant I/O; alternate functions FMC_A7, EVENTOUT. |
| 64 | PF14 | bidirectional | 5 V-tolerant I/O; alternate functions FMC_A8, EVENTOUT. |
| 65 | PF15 | bidirectional | 5 V-tolerant I/O; alternate functions FMC_A9, EVENTOUT. |
| 66 | PG0 | bidirectional | 5 V-tolerant I/O; alternate functions FMC_A10, EVENTOUT. |
| 67 | PG1 | bidirectional | 5 V-tolerant I/O; alternate functions FMC_A11, EVENTOUT. |
| 68 | PE7 | bidirectional | 5 V-tolerant I/O; alternate functions TIM1_ETR, UART7_Rx, FMC_D4, EVENTOUT. |
| 69 | PE8 | bidirectional | 5 V-tolerant I/O; alternate functions TIM1_CH1N, UART7_Tx, FMC_D5, EVENTOUT. |
| 70 | PE9 | bidirectional | 5 V-tolerant I/O; alternate functions TIM1_CH1, FMC_D6, EVENTOUT. |
| 71 | VSS | power_in | Digital ground supply pin. |
| 72 | VDD | power_in | Digital supply pin of 1.7 to 3.6 V for I/O and the internal regulator. |
| 73 | PE10 | bidirectional | 5 V-tolerant I/O; alternate functions TIM1_CH2N, FMC_D7, EVENTOUT. |
| 74 | PE11 | bidirectional | 5 V-tolerant I/O; alternate functions TIM1_CH2, SPI4_NSS, FMC_D8, LCD_G3, EVENTOUT. |
| 75 | PE12 | bidirectional | 5 V-tolerant I/O; alternate functions TIM1_CH3N, SPI4_SCK, FMC_D9, LCD_B4, EVENTOUT. |
| 76 | PE13 | bidirectional | 5 V-tolerant I/O; alternate functions TIM1_CH3, SPI4_MISO, FMC_D10, LCD_DE, EVENTOUT. |
| 77 | PE14 | bidirectional | 5 V-tolerant I/O; alternate functions TIM1_CH4, SPI4_MOSI, FMC_D11, LCD_CLK, EVENTOUT. |
| 78 | PE15 | bidirectional | 5 V-tolerant I/O; alternate functions TIM1_BKIN, FMC_D12, LCD_R7, EVENTOUT. |
| 79 | PB10 | bidirectional | 5 V-tolerant I/O; alternate functions TIM2_CH3, I2C2_SCL, SPI2_SCK/I2S2_CK, USART3_TX, OTG_HS_ULPI_D3, ETH_MII_RX_ER, LCD_G4, EVENTOUT. |
| 80 | PB11 | bidirectional | 5 V-tolerant I/O; alternate functions TIM2_CH4, I2C2_SDA, USART3_RX, OTG_HS_ULPI_D4, ETH_MII_TX_EN/ETH_RMII_TX_EN, LCD_G5, EVENTOUT. |
| 81 | VCAP_1 | passive | Connection for the external 2.2 uF ceramic capacitor (ESR < 2 ohm) that stabilizes the main regulator (100 nF decoupling when regulator is OFF). |
| 82 | VDD | power_in | Digital supply pin of 1.7 to 3.6 V for I/O and the internal regulator. |
| 83 | PH6 | bidirectional | 5 V-tolerant I/O; alternate functions I2C2_SMBA, SPI5_SCK, TIM12_CH1, ETH_MII_RXD2, FMC_SDNE1, DCMI_D8, EVENTOUT. |
| 84 | PH7 | bidirectional | 5 V-tolerant I/O; alternate functions I2C3_SCL, SPI5_MISO, ETH_MII_RXD3, FMC_SDCKE1, DCMI_D9, EVENTOUT. |
| 85 | PH8 | bidirectional | 5 V-tolerant I/O; alternate functions I2C3_SDA, FMC_D16, DCMI_HSYNC, LCD_R2, EVENTOUT. |
| 86 | PH9 | bidirectional | 5 V-tolerant I/O; alternate functions I2C3_SMBA, TIM12_CH2, FMC_D17, DCMI_D0, LCD_R3, EVENTOUT. |
| 87 | PH10 | bidirectional | 5 V-tolerant I/O; alternate functions TIM5_CH1, FMC_D18, DCMI_D1, LCD_R4, EVENTOUT. |
| 88 | PH11 | bidirectional | 5 V-tolerant I/O; alternate functions TIM5_CH2, FMC_D19, DCMI_D2, LCD_R5, EVENTOUT. |
| 89 | PH12 | bidirectional | 5 V-tolerant I/O; alternate functions TIM5_CH3, FMC_D20, DCMI_D3, LCD_R6, EVENTOUT. |
| 90 | VSS | power_in | Digital ground supply pin. |
| 91 | VDD | power_in | Digital supply pin of 1.7 to 3.6 V for I/O and the internal regulator. |
| 92 | PB12 | bidirectional | 5 V-tolerant I/O; alternate functions TIM1_BKIN, I2C2_SMBA, SPI2_NSS/I2S2_WS, USART3_CK, CAN2_RX, OTG_HS_ULPI_D5, ETH_MII_TXD0/ETH_RMII_TXD0, OTG_HS_ID, EVENTOUT. |
| 93 | PB13 | bidirectional | 5 V-tolerant I/O; alternate functions TIM1_CH1N, SPI2_SCK/I2S2_CK, USART3_CTS, CAN2_TX, OTG_HS_ULPI_D6, ETH_MII_TXD1/ETH_RMII_TXD1, EVENTOUT; additional function OTG_HS_VBUS. |
| 94 | PB14 | bidirectional | 5 V-tolerant I/O; alternate functions TIM1_CH2N, TIM8_CH2N, SPI2_MISO, I2S2ext_SD, USART3_RTS, TIM12_CH1, OTG_HS_DM, EVENTOUT. |
| 95 | PB15 | bidirectional | 5 V-tolerant I/O; alternate functions RTC_REFIN, TIM1_CH3N, TIM8_CH3N, SPI2_MOSI/I2S2_SD, TIM12_CH2, OTG_HS_DP, EVENTOUT. |
| 96 | PD8 | bidirectional | 5 V-tolerant I/O; alternate functions USART3_TX, FMC_D13, EVENTOUT. |
| 97 | PD9 | bidirectional | 5 V-tolerant I/O; alternate functions USART3_RX, FMC_D14, EVENTOUT. |
| 98 | PD10 | bidirectional | 5 V-tolerant I/O; alternate functions USART3_CK, FMC_D15, LCD_B3, EVENTOUT. |
| 99 | PD11 | bidirectional | 5 V-tolerant I/O; alternate functions USART3_CTS, FMC_A16, EVENTOUT. |
| 100 | PD12 | bidirectional | 5 V-tolerant I/O; alternate functions TIM4_CH1, USART3_RTS, FMC_A17, EVENTOUT. |
| 101 | PD13 | bidirectional | 5 V-tolerant I/O; alternate functions TIM4_CH2, FMC_A18, EVENTOUT. |
| 102 | VSS | power_in | Digital ground supply pin. |
| 103 | VDD | power_in | Digital supply pin of 1.7 to 3.6 V for I/O and the internal regulator. |
| 104 | PD14 | bidirectional | 5 V-tolerant I/O; alternate functions TIM4_CH3, FMC_D0, EVENTOUT. |
| 105 | PD15 | bidirectional | 5 V-tolerant I/O; alternate functions TIM4_CH4, FMC_D1, EVENTOUT. |
| 106 | PG2 | bidirectional | 5 V-tolerant I/O; alternate functions FMC_A12, EVENTOUT. |
| 107 | PG3 | bidirectional | 5 V-tolerant I/O; alternate functions FMC_A13, EVENTOUT. |
| 108 | PG4 | bidirectional | 5 V-tolerant I/O; alternate functions FMC_A14/FMC_BA0, EVENTOUT. |
| 109 | PG5 | bidirectional | 5 V-tolerant I/O; alternate functions FMC_A15/FMC_BA1, EVENTOUT. |
| 110 | PG6 | bidirectional | 5 V-tolerant I/O; alternate functions FMC_INT2, DCMI_D12, LCD_R7, EVENTOUT. |
| 111 | PG7 | bidirectional | 5 V-tolerant I/O; alternate functions USART6_CK, FMC_INT3, DCMI_D13, LCD_CLK, EVENTOUT. |
| 112 | PG8 | bidirectional | 5 V-tolerant I/O; alternate functions SPI6_NSS, USART6_RTS, ETH_PPS_OUT, FMC_SDCLK, EVENTOUT. |
| 113 | VSS | power_in | Digital ground supply pin. |
| 114 | VDD | power_in | Digital supply pin of 1.7 to 3.6 V for I/O and the internal regulator. |
| 115 | PC6 | bidirectional | 5 V-tolerant I/O; alternate functions TIM3_CH1, TIM8_CH1, I2S2_MCK, USART6_TX, SDIO_D6, DCMI_D0, LCD_HSYNC, EVENTOUT. |
| 116 | PC7 | bidirectional | 5 V-tolerant I/O; alternate functions TIM3_CH2, TIM8_CH2, I2S3_MCK, USART6_RX, SDIO_D7, DCMI_D1, LCD_G6, EVENTOUT. |
| 117 | PC8 | bidirectional | 5 V-tolerant I/O; alternate functions TIM3_CH3, TIM8_CH3, USART6_CK, SDIO_D0, DCMI_D2, EVENTOUT. |
| 118 | PC9 | bidirectional | 5 V-tolerant I/O; alternate functions MCO2, TIM3_CH4, TIM8_CH4, I2C3_SDA, I2S_CKIN, SDIO_D1, DCMI_D3, EVENTOUT. |
| 119 | PA8 | bidirectional | 5 V-tolerant I/O; alternate functions MCO1, TIM1_CH1, I2C3_SCL, USART1_CK, OTG_FS_SOF, LCD_R6, EVENTOUT. |
| 120 | PA9 | bidirectional | 5 V-tolerant I/O; alternate functions TIM1_CH2, I2C3_SMBA, USART1_TX, DCMI_D0, EVENTOUT; additional function OTG_FS_VBUS. |
| 121 | PA10 | bidirectional | 5 V-tolerant I/O; alternate functions TIM1_CH3, USART1_RX, OTG_FS_ID, DCMI_D1, EVENTOUT. |
| 122 | PA11 | bidirectional | 5 V-tolerant I/O; alternate functions TIM1_CH4, USART1_CTS, CAN1_RX, LCD_R4, OTG_FS_DM, EVENTOUT. |
| 123 | PA12 | bidirectional | 5 V-tolerant I/O; alternate functions TIM1_ETR, USART1_RTS, CAN1_TX, LCD_R5, OTG_FS_DP, EVENTOUT. |
| 124 | PA13 (JTMS-SWDIO) | bidirectional | 5 V-tolerant I/O that is JTMS-SWDIO after reset; also EVENTOUT. |
| 125 | VCAP_2 | passive | Connection for the external 2.2 uF ceramic capacitor (ESR < 2 ohm) that stabilizes the main regulator (100 nF decoupling when regulator is OFF). |
| 126 | VSS | power_in | Digital ground supply pin. |
| 127 | VDD | power_in | Digital supply pin of 1.7 to 3.6 V for I/O and the internal regulator. |
| 128 | PH13 | bidirectional | 5 V-tolerant I/O; alternate functions TIM8_CH1N, CAN1_TX, FMC_D21, LCD_G2, EVENTOUT. |
| 129 | PH14 | bidirectional | 5 V-tolerant I/O; alternate functions TIM8_CH2N, FMC_D22, DCMI_D4, LCD_G3, EVENTOUT. |
| 130 | PH15 | bidirectional | 5 V-tolerant I/O; alternate functions TIM8_CH3N, FMC_D23, DCMI_D11, LCD_G4, EVENTOUT. |
| 131 | PI0 | bidirectional | 5 V-tolerant I/O; alternate functions TIM5_CH4, SPI2_NSS/I2S2_WS, FMC_D24, DCMI_D13, LCD_G5, EVENTOUT (not usable for I2S2 full-duplex). |
| 132 | PI1 | bidirectional | 5 V-tolerant I/O; alternate functions SPI2_SCK/I2S2_CK, FMC_D25, DCMI_D8, LCD_G6, EVENTOUT (not usable for I2S2 full-duplex). |
| 133 | PI2 | bidirectional | 5 V-tolerant I/O; alternate functions TIM8_CH4, SPI2_MISO, I2S2ext_SD, FMC_D26, DCMI_D9, LCD_G7, EVENTOUT. |
| 134 | PI3 | bidirectional | 5 V-tolerant I/O; alternate functions TIM8_ETR, SPI2_MOSI/I2S2_SD, FMC_D27, DCMI_D10, EVENTOUT. |
| 135 | VSS | power_in | Digital ground supply pin. |
| 136 | VDD | power_in | Digital supply pin of 1.7 to 3.6 V for I/O and the internal regulator. |
| 137 | PA14 (JTCK-SWCLK) | bidirectional | 5 V-tolerant I/O that is JTCK-SWCLK after reset; also EVENTOUT. |
| 138 | PA15 (JTDI) | bidirectional | 5 V-tolerant I/O that is JTDI after reset; alternate functions TIM2_CH1/TIM2_ETR, SPI1_NSS, SPI3_NSS/I2S3_WS, EVENTOUT. |
| 139 | PC10 | bidirectional | 5 V-tolerant I/O; alternate functions SPI3_SCK/I2S3_CK, USART3_TX, UART4_TX, SDIO_D2, DCMI_D8, LCD_R2, EVENTOUT. |
| 140 | PC11 | bidirectional | 5 V-tolerant I/O; alternate functions I2S3ext_SD, SPI3_MISO, USART3_RX, UART4_RX, SDIO_D3, DCMI_D4, EVENTOUT. |
| 141 | PC12 | bidirectional | 5 V-tolerant I/O; alternate functions SPI3_MOSI/I2S3_SD, USART3_CK, UART5_TX, SDIO_CK, DCMI_D9, EVENTOUT. |
| 142 | PD0 | bidirectional | 5 V-tolerant I/O; alternate functions CAN1_RX, FMC_D2, EVENTOUT. |
| 143 | PD1 | bidirectional | 5 V-tolerant I/O; alternate functions CAN1_TX, FMC_D3, EVENTOUT. |
| 144 | PD2 | bidirectional | 5 V-tolerant I/O; alternate functions TIM3_ETR, UART5_RX, SDIO_CMD, DCMI_D11, EVENTOUT. |
| 145 | PD3 | bidirectional | 5 V-tolerant I/O; alternate functions SPI2_SCK/I2S2_CK, USART2_CTS, FMC_CLK, DCMI_D5, LCD_G7, EVENTOUT. |
| 146 | PD4 | bidirectional | 5 V-tolerant I/O; alternate functions USART2_RTS, FMC_NOE, EVENTOUT. |
| 147 | PD5 | bidirectional | 5 V-tolerant I/O; alternate functions USART2_TX, FMC_NWE, EVENTOUT. |
| 148 | VSS | power_in | Digital ground supply pin. |
| 149 | VDD | power_in | Digital supply pin of 1.7 to 3.6 V for I/O and the internal regulator. |
| 150 | PD6 | bidirectional | 5 V-tolerant I/O; alternate functions SPI3_MOSI/I2S3_SD, SAI1_SD_A, USART2_RX, FMC_NWAIT, DCMI_D10, LCD_B2, EVENTOUT. |
| 151 | PD7 | bidirectional | 5 V-tolerant I/O; alternate functions USART2_CK, FMC_NE1/FMC_NCE2, EVENTOUT. |
| 152 | PG9 | bidirectional | 5 V-tolerant I/O; alternate functions USART6_RX, FMC_NE2/FMC_NCE3, DCMI_VSYNC (silicon revision 3 only), EVENTOUT. |
| 153 | PG10 | bidirectional | 5 V-tolerant I/O; alternate functions LCD_G3, FMC_NCE4_1/FMC_NE3, DCMI_D2, LCD_B2, EVENTOUT. |
| 154 | PG11 | bidirectional | 5 V-tolerant I/O; alternate functions ETH_MII_TX_EN/ETH_RMII_TX_EN, FMC_NCE4_2, DCMI_D3, LCD_B3, EVENTOUT. |
| 155 | PG12 | bidirectional | 5 V-tolerant I/O; alternate functions SPI6_MISO, USART6_RTS, LCD_B4, FMC_NE4, LCD_B1, EVENTOUT. |
| 156 | PG13 | bidirectional | 5 V-tolerant I/O; alternate functions SPI6_SCK, USART6_CTS, ETH_MII_TXD0/ETH_RMII_TXD0, FMC_A24, EVENTOUT. |
| 157 | PG14 | bidirectional | 5 V-tolerant I/O; alternate functions SPI6_MOSI, USART6_TX, ETH_MII_TXD1/ETH_RMII_TXD1, FMC_A25, EVENTOUT. |
| 158 | VSS | power_in | Digital ground supply pin. |
| 159 | VDD | power_in | Digital supply pin of 1.7 to 3.6 V for I/O and the internal regulator. |
| 160 | PG15 | bidirectional | 5 V-tolerant I/O; alternate functions USART6_CTS, FMC_SDNCAS, DCMI_D13, EVENTOUT. |
| 161 | PB3 (JTDO/TRACESWO) | bidirectional | 5 V-tolerant I/O that is JTDO/TRACESWO after reset; alternate functions TIM2_CH2, SPI1_SCK, SPI3_SCK/I2S3_CK, EVENTOUT. |
| 162 | PB4 (NJTRST) | bidirectional | 5 V-tolerant I/O that is NJTRST after reset; alternate functions TIM3_CH1, SPI1_MISO, SPI3_MISO, I2S3ext_SD, EVENTOUT. |
| 163 | PB5 | bidirectional | 5 V-tolerant I/O; alternate functions TIM3_CH2, I2C1_SMBA, SPI1_MOSI, SPI3_MOSI/I2S3_SD, CAN2_RX, OTG_HS_ULPI_D7, ETH_PPS_OUT, FMC_SDCKE1, DCMI_D10, EVENTOUT. |
| 164 | PB6 | bidirectional | 5 V-tolerant I/O; alternate functions TIM4_CH1, I2C1_SCL, USART1_TX, CAN2_TX, FMC_SDNE1, DCMI_D5, EVENTOUT. |
| 165 | PB7 | bidirectional | 5 V-tolerant I/O; alternate functions TIM4_CH2, I2C1_SDA, USART1_RX, FMC_NL, DCMI_VSYNC, EVENTOUT. |
| 166 | BOOT0 | input | Dedicated boot-mode selection pin (VPP function); input voltage range 0 to 9 V. |
| 167 | PB8 | bidirectional | 5 V-tolerant I/O; alternate functions TIM4_CH3, TIM10_CH1, I2C1_SCL, CAN1_RX, ETH_MII_TXD3, SDIO_D4, DCMI_D6, LCD_B6, EVENTOUT. |
| 168 | PB9 | bidirectional | 5 V-tolerant I/O; alternate functions TIM4_CH4, TIM11_CH1, I2C1_SDA, SPI2_NSS/I2S2_WS, CAN1_TX, SDIO_D5, DCMI_D7, LCD_B7, EVENTOUT. |
| 169 | PE0 | bidirectional | 5 V-tolerant I/O; alternate functions TIM4_ETR, UART8_RX, FMC_NBL0, DCMI_D2, EVENTOUT. |
| 170 | PE1 | bidirectional | 5 V-tolerant I/O; alternate functions UART8_Tx, FMC_NBL1, DCMI_D3, EVENTOUT. |
| 171 | PDR_ON | input | Power-down reset control: held high enables the internal power supply supervisor (internal reset ON), connected to an external supervisor to disable it. |
| 172 | VDD | power_in | Digital supply pin of 1.7 to 3.6 V for I/O and the internal regulator. |
| 173 | PI4 | bidirectional | 5 V-tolerant I/O; alternate functions TIM8_BKIN, FMC_NBL2, DCMI_D5, LCD_B4, EVENTOUT. |
| 174 | PI5 | bidirectional | 5 V-tolerant I/O; alternate functions TIM8_CH1, FMC_NBL3, DCMI_VSYNC, LCD_B5, EVENTOUT. |
| 175 | PI6 | bidirectional | 5 V-tolerant I/O; alternate functions TIM8_CH2, FMC_D28, DCMI_D6, LCD_B6, EVENTOUT. |
| 176 | PI7 | bidirectional | 5 V-tolerant I/O; alternate functions TIM8_CH3, FMC_D29, DCMI_D7, LCD_B7, EVENTOUT. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | LQFP-176(24x24) |
| Category | Embedded Processors & Controllers |
| Pins | 176 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| External main supply voltage (VDD-VSS) | VDD-VSS | -0.3 | 4 | V | including VDDA, VDD and VBAT | 91 | |
| Current into each VDD_x supply line (source) | IVDD | 100 | mA | maximum per VDD_x line | 92 | ||
| Current out of each VSS_x ground line (sink) | IVSS | -100 | mA | maximum per VSS_x line | 92 | ||
| Output sink current, any I/O and control pin | IIO | 25 | mA | 92 | |||
| Output source current, any I/O and control pin | IIO | -25 | mA | 92 | |||
| Storage temperature range | TSTG | -65 | 150 | °C | 92 | ||
| Maximum junction temperature | TJ | 125 | °C | 92 | |||
| Internal AHB clock frequency | fHCLK | 0 | 180 | MHz | power scale 1 (VOS=0x11), regulator ON, overdrive ON | 93 | |
| Standard operating voltage | VDD | 1.7 | 3.6 | V | 94 | ||
| Analog operating voltage | VDDA | 1.7 | 2.4 | V | ADC limited to 1.2 Msps; must be equal potential with VDD | 94 | |
| Analog operating voltage | VDDA | 2.4 | 3.6 | V | ADC limited to 2.4 Msps | 94 | |
| Backup operating voltage | VBAT | 1.65 | 3.6 | V | 94 | ||
| Internal 1.2 V voltage on VCAP_1/VCAP_2 (regulator ON) | V12 | 1.26 | 1.32 | 1.4 | V | power scale 1 (VOS=0x11), HCLK max frequency 168 MHz (overdrive OFF) or 180 MHz (overdrive ON) | 94 |
| Input voltage on RST and FT pins | VIN | -0.3 | 5.5 | V | 2 V ≤ VDD ≤ 3.6 V | 94 | |
| Input voltage on BOOT0 pin | VIN | 0 | 9 | V | 94 | ||
| Ambient temperature, suffix 6, maximum power dissipation | TA | -40 | 85 | °C | suffix 6 version | 94 | |
| Junction temperature range, suffix 6 | TJ | -40 | 105 | °C | suffix 6 version | 95 | |
| Power-on/power-down reset threshold, falling edge | VPOR/PDR | 1.6 | 1.68 | 1.76 | V | falling edge | 97 |
| Supply current in run mode | IDD | 98 | 141 | mA | fHCLK 180 MHz, all peripherals enabled, executing from Flash with ART enabled; typ at TA=25 °C, max at TA=105 °C | 100 | |
| Wakeup time from standby mode | tWUSTDBY | 318 | 412 | µs | max given at -40 °C | 115 | |
| Oscillator frequency (HSE) | fOSC_IN | 4 | 26 | MHz | HSE crystal/resonator oscillator | 118 | |
| HSE accuracy | ACCHSE | -500 | 500 | ppm | must meet USB specification | 118 | |
| HSE oscillator start-up time | tSU(HSE) | 2 | ms | from VDD stable | 118 | ||
| HSI oscillator frequency | fHSI | 16 | MHz | 120 | |||
| HSI oscillator accuracy, user trimmed | ACCHSI | -1 | 1 | % | user adjustment via RCC_CR register | 120 | |
| HSI oscillator accuracy, factory calibrated | ACCHSI | -8 | 4.5 | % | factory calibrated, TA = -40 to 105 °C | 120 | |
| HSI oscillator accuracy, factory calibrated | ACCHSI | -4 | 4 | % | factory calibrated, TA = -10 to 85 °C | 120 | |
| HSI oscillator accuracy, factory calibrated | ACCHSI | -1 | 1 | % | factory calibrated, TA = 25 °C | 120 | |
| LSI oscillator frequency | fLSI | 17 | 32 | 47 | kHz | VDD = 3 V, TA = -40 to 105 °C | 120 |
| Main PLL input clock | fPLL_IN | 0.95 | 1 | 2.1 | MHz | 121 | |
| Main PLL output clock | fPLL_OUT | 24 | 180 | MHz | 121 | ||
| Main PLL VCO output | fVCO_OUT | 192 | 432 | MHz | 121 | ||
| PLL lock time | tLOCK | 75 | 200 | µs | VCO frequency = 192 MHz | 121 | |
| PLL lock time | tLOCK | 100 | 300 | µs | VCO frequency = 432 MHz | 121 | |
| Pull-up equivalent resistance | RPU | 30 | 40 | 50 | kΩ | VIN = VSS, all pins except PA10/PB12 | 132 |
| Pull-up equivalent resistance, OTG ID pins | RPU | 7 | 10 | 14 | kΩ | PA10/PB12 (OTG_FS_ID, OTG_HS_ID) | 132 |
| I/O pin capacitance | CIO | 5 | pF | 132 | |||
| I/O input leakage current | Ilkg | -1 | 1 | µA | VSS ≤ VIN ≤ VDD | 132 | |
| Output low-level voltage, CMOS port | VOL | 0.4 | V | IIO = +8 mA, 2.7 V ≤ VDD ≤ 3.6 V | 134 | ||
| NRST pull-up equivalent resistance | RPU | 30 | 40 | 50 | kΩ | VIN = VSS | 136 |
| NRST internal reset pulse duration | TNRST_OUT | 20 | µs | internal reset source | 136 | ||
| SPI master clock frequency, SPI1/4/5/6 | fSCK | 45 | MHz | master mode, 2.7 V ≤ VDD ≤ 3.6 V | 140 | ||
| USB OTG FS output low voltage | VOL | 0.3 | V | 1.5 kΩ RL to 3.6 V | 147 | ||
| USB OTG FS output high voltage | VOH | 2.8 | 3.6 | V | 15 kΩ RL to VSS | 147 | |
| USB OTG FS output rise time | tr | 4 | 20 | ns | CL = 50 pF | 148 | |
| USB OTG FS output fall time | tf | 4 | 20 | ns | CL = 50 pF | 148 | |
| USB OTG FS output driver impedance | ZDRV | 28 | 44 | Ω | driving high or low | 148 | |
| ADC clock frequency | fADC | 0.6 | 15 | 18 | MHz | VDDA = 1.7 to 2.4 V | 153 |
| ADC clock frequency | fADC | 0.6 | 30 | 36 | MHz | VDDA = 2.4 to 3.6 V | 153 |
| ADC supply current in conversion mode | IVDDA | 1.6 | 1.8 | mA | conversion mode | 153 | |
| Temperature sensor linearity | TL | -2 | 2 | °C | VSENSE linearity vs temperature | 159 | |
| Temperature sensor average slope | Avg_Slope | 2.5 | mV/°C | 159 | |||
| Internal reference voltage | VREFINT | 1.18 | 1.21 | 1.24 | V | TA = -40 to +105 °C | 159 |
| DAC load resistance, buffer ON | RLOAD | 5 | kΩ | buffer enabled | 160 | ||
| DAC quiescent VDDA supply current | IDDA | 280 | 380 | µA | no load, mid-code input (0x800) | 161 | |
| DAC integral non-linearity, 12-bit | INL | -4 | 4 | LSB | 12-bit configuration | 161 | |
| DAC differential non-linearity, 10-bit | DNL | -0.5 | 0.5 | LSB | 10-bit configuration | 161 |
CAD (KiCad official)
- Symbol:
STM32F429IIT6 - Footprint:
Package_QFP:LQFP-176_24x24mm_P0.5mm - 3D model: LQFP-176(24x24) (KiCad packages3D, STEP)
- 3D model files:
stm32f429iit6-etched.step/stm32f429iit6-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);stm32f429iit6.step/stm32f429iit6.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (226 pp, sha256
9eccb942b0df757c, retrieved 2026-11-05, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).