Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

STM32F429IIT6

STMicroelectronics · Microcontrollers (MCU/MPU/SOC) · LQFP-176(24x24)

STM32F429IIT6 from STMicroelectronics, in a LQFP-176(24x24). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 PE2 bidirectional 5 V-tolerant I/O; alternate functions TRACECLK, SPI4_SCK, SAI1_MCLK_A, ETH_MII_TXD3, FMC_A23, EVENTOUT.
2 PE3 bidirectional 5 V-tolerant I/O; alternate functions TRACED0, SAI1_SD_B, FMC_A19, EVENTOUT.
3 PE4 bidirectional 5 V-tolerant I/O; alternate functions TRACED1, SPI4_NSS, SAI1_FS_A, FMC_A20, DCMI_D4, LCD_B0, EVENTOUT.
4 PE5 bidirectional 5 V-tolerant I/O; alternate functions TRACED2, TIM9_CH1, SPI4_MISO, SAI1_SCK_A, FMC_A21, DCMI_D6, LCD_G0, EVENTOUT.
5 PE6 bidirectional 5 V-tolerant I/O; alternate functions TRACED3, TIM9_CH2, SPI4_MOSI, SAI1_SD_A, FMC_A22, DCMI_D7, LCD_G1, EVENTOUT.
6 VBAT power_in Backup supply of 1.65 to 3.6 V for the RTC, 32 kHz oscillator and backup registers when VDD is absent; connect to VDD if internal reset is OFF.
7 PI8 bidirectional 5 V-tolerant I/O powered via the backup-domain switch (3 mA sink limit; in output mode max 2 MHz with 30 pF, not usable as current source); function EVENTOUT, additional function TAMP_2.
8 PC13 bidirectional 5 V-tolerant I/O powered via the backup-domain switch (3 mA sink limit; in output mode max 2 MHz with 30 pF, not usable as current source); function EVENTOUT, additional function TAMP_1.
9 PC14-OSC32_IN bidirectional I/O (3 mA limit, max 2 MHz with 30 pF in output mode) that is the 32 kHz oscillator input OSC32_IN; also EVENTOUT.
10 PC15-OSC32_OUT bidirectional I/O (3 mA limit, max 2 MHz with 30 pF in output mode) that is the 32 kHz oscillator output OSC32_OUT; also EVENTOUT.
11 PI9 bidirectional 5 V-tolerant I/O; alternate functions CAN1_RX, FMC_D30, LCD_VSYNC, EVENTOUT.
12 PI10 bidirectional 5 V-tolerant I/O; alternate functions ETH_MII_RX_ER, FMC_D31, LCD_HSYNC, EVENTOUT.
13 PI11 bidirectional 5 V-tolerant I/O; alternate functions OTG_HS_ULPI_DIR, EVENTOUT.
14 VSS power_in Digital ground supply pin.
15 VDD power_in Digital supply pin of 1.7 to 3.6 V for I/O and the internal regulator.
16 PF0 bidirectional 5 V-tolerant I/O; alternate functions I2C2_SDA, FMC_A0, EVENTOUT.
17 PF1 bidirectional 5 V-tolerant I/O; alternate functions I2C2_SCL, FMC_A1, EVENTOUT.
18 PF2 bidirectional 5 V-tolerant I/O; alternate functions I2C2_SMBA, FMC_A2, EVENTOUT.
19 PF3 bidirectional 5 V-tolerant I/O (except in analog mode); alternate functions FMC_A3, EVENTOUT; additional function ADC3_IN9.
20 PF4 bidirectional 5 V-tolerant I/O (except in analog mode); alternate functions FMC_A4, EVENTOUT; additional function ADC3_IN14.
21 PF5 bidirectional 5 V-tolerant I/O (except in analog mode); alternate functions FMC_A5, EVENTOUT; additional function ADC3_IN15.
22 VSS power_in Digital ground supply pin.
23 VDD power_in Digital supply pin of 1.7 to 3.6 V for I/O and the internal regulator.
24 PF6 bidirectional 5 V-tolerant I/O (except in analog mode); alternate functions TIM10_CH1, SPI5_NSS, SAI1_SD_B, UART7_Rx, FMC_NIORD, EVENTOUT; additional function ADC3_IN4.
25 PF7 bidirectional 5 V-tolerant I/O (except in analog mode); alternate functions TIM11_CH1, SPI5_SCK, SAI1_MCLK_B, UART7_Tx, FMC_NREG, EVENTOUT; additional function ADC3_IN5.
26 PF8 bidirectional 5 V-tolerant I/O (except in analog mode); alternate functions SPI5_MISO, SAI1_SCK_B, TIM13_CH1, FMC_NIOWR, EVENTOUT; additional function ADC3_IN6.
27 PF9 bidirectional 5 V-tolerant I/O (except in analog mode); alternate functions SPI5_MOSI, SAI1_FS_B, TIM14_CH1, FMC_CD, EVENTOUT; additional function ADC3_IN7.
28 PF10 bidirectional 5 V-tolerant I/O (except in analog mode); alternate functions FMC_INTR, DCMI_D11, LCD_DE, EVENTOUT; additional function ADC3_IN8.
29 PH0-OSC_IN bidirectional I/O that is the main oscillator input OSC_IN (4 to 26 MHz crystal); also EVENTOUT.
30 PH1-OSC_OUT bidirectional I/O that is the main oscillator output OSC_OUT (4 to 26 MHz crystal); also EVENTOUT.
31 NRST bidirectional Bidirectional reset pin with weak pull-up (30 to 50 kohm); input pulses under 100 ns are filtered and pulses over 300 ns (VDD > 2.7 V) reset the device.
32 PC0 bidirectional 5 V-tolerant I/O (except in analog mode); alternate functions OTG_HS_ULPI_STP, FMC_SDNWE, EVENTOUT; additional function ADC123_IN10.
33 PC1 bidirectional 5 V-tolerant I/O (except in analog mode); alternate functions ETH_MDC, EVENTOUT; additional function ADC123_IN11.
34 PC2 bidirectional 5 V-tolerant I/O (except in analog mode); alternate functions SPI2_MISO, I2S2ext_SD, OTG_HS_ULPI_DIR, ETH_MII_TXD2, FMC_SDNE0, EVENTOUT; additional function ADC123_IN12.
35 PC3 bidirectional 5 V-tolerant I/O (except in analog mode); alternate functions SPI2_MOSI/I2S2_SD, OTG_HS_ULPI_NXT, ETH_MII_TX_CLK, FMC_SDCKE0, EVENTOUT; additional function ADC123_IN13.
36 VDD power_in Digital supply pin of 1.7 to 3.6 V for I/O and the internal regulator.
37 VSSA power_in Analog ground for ADC, DAC, reset block, RC and PLL; must be connected to VSS.
38 VREF+ power_in Positive reference voltage for ADC/DAC, 1.7 to 3.6 V with VDDA - VREF+ < 1.2 V.
39 VDDA power_in Analog supply of 1.7 to 3.6 V for ADC, DAC, reset block, RC and PLL; must be connected to VDD.
40 PA0-WKUP bidirectional 5 V-tolerant I/O; alternate functions TIM2_CH1/TIM2_ETR, TIM5_CH1, TIM8_ETR, USART2_CTS, UART4_TX, ETH_MII_CRS, EVENTOUT; additional functions ADC123_IN0 and WKUP; acts as active-low internal reset when BYPASS_REG is tied to VDD.
41 PA1 bidirectional 5 V-tolerant I/O (except in analog mode); alternate functions TIM2_CH2, TIM5_CH2, USART2_RTS, UART4_RX, ETH_MII_RX_CLK/ETH_RMII_REF_CLK, EVENTOUT; additional function ADC123_IN1.
42 PA2 bidirectional 5 V-tolerant I/O (except in analog mode); alternate functions TIM2_CH3, TIM5_CH3, TIM9_CH1, USART2_TX, ETH_MDIO, EVENTOUT; additional function ADC123_IN2.
43 PH2 bidirectional 5 V-tolerant I/O; alternate functions ETH_MII_CRS, FMC_SDCKE0, LCD_R0, EVENTOUT.
44 PH3 bidirectional 5 V-tolerant I/O; alternate functions ETH_MII_COL, FMC_SDNE0, LCD_R1, EVENTOUT.
45 PH4 bidirectional 5 V-tolerant I/O; alternate functions I2C2_SCL, OTG_HS_ULPI_NXT, EVENTOUT.
46 PH5 bidirectional 5 V-tolerant I/O; alternate functions I2C2_SDA, SPI5_NSS, FMC_SDNWE, EVENTOUT.
47 PA3 bidirectional 5 V-tolerant I/O (except in analog mode); alternate functions TIM2_CH4, TIM5_CH4, TIM9_CH2, USART2_RX, OTG_HS_ULPI_D0, ETH_MII_COL, LCD_B5, EVENTOUT; additional function ADC123_IN3.
48 BYPASS_REG input Regulator bypass input: held low enables the internal voltage regulator, held high disables it (regulator OFF).
49 VDD power_in Digital supply pin of 1.7 to 3.6 V for I/O and the internal regulator.
50 PA4 bidirectional 3.3 V-tolerant TTa I/O (except in analog mode); alternate functions SPI1_NSS, SPI3_NSS/I2S3_WS, USART2_CK, OTG_HS_SOF, DCMI_HSYNC, LCD_VSYNC, EVENTOUT; additional functions ADC12_IN4 and DAC_OUT1.
51 PA5 bidirectional 3.3 V-tolerant TTa I/O (except in analog mode); alternate functions TIM2_CH1/TIM2_ETR, TIM8_CH1N, SPI1_SCK, OTG_HS_ULPI_CK, EVENTOUT; additional functions ADC12_IN5 and DAC_OUT2.
52 PA6 bidirectional 5 V-tolerant I/O (except in analog mode); alternate functions TIM1_BKIN, TIM3_CH1, TIM8_BKIN, SPI1_MISO, TIM13_CH1, DCMI_PIXCLK, LCD_G2, EVENTOUT; additional function ADC12_IN6.
53 PA7 bidirectional 5 V-tolerant I/O (except in analog mode); alternate functions TIM1_CH1N, TIM3_CH2, TIM8_CH1N, SPI1_MOSI, TIM14_CH1, ETH_MII_RX_DV/ETH_RMII_CRS_DV, EVENTOUT; additional function ADC12_IN7.
54 PC4 bidirectional 5 V-tolerant I/O (except in analog mode); alternate functions ETH_MII_RXD0/ETH_RMII_RXD0, EVENTOUT; additional function ADC12_IN14.
55 PC5 bidirectional 5 V-tolerant I/O (except in analog mode); alternate functions ETH_MII_RXD1/ETH_RMII_RXD1, EVENTOUT; additional function ADC12_IN15.
56 PB0 bidirectional 5 V-tolerant I/O (except in analog mode); alternate functions TIM1_CH2N, TIM3_CH3, TIM8_CH2N, LCD_R3, OTG_HS_ULPI_D1, ETH_MII_RXD2, EVENTOUT; additional function ADC12_IN8.
57 PB1 bidirectional 5 V-tolerant I/O (except in analog mode); alternate functions TIM1_CH3N, TIM3_CH4, TIM8_CH3N, LCD_R6, OTG_HS_ULPI_D2, ETH_MII_RXD3, EVENTOUT; additional function ADC12_IN9.
58 PB2-BOOT1 bidirectional 5 V-tolerant I/O that also serves as BOOT1 boot-mode selection; function EVENTOUT.
59 PF11 bidirectional 5 V-tolerant I/O; alternate functions SPI5_MOSI, FMC_SDNRAS, DCMI_D12, EVENTOUT.
60 PF12 bidirectional 5 V-tolerant I/O; alternate functions FMC_A6, EVENTOUT.
61 VSS power_in Digital ground supply pin.
62 VDD power_in Digital supply pin of 1.7 to 3.6 V for I/O and the internal regulator.
63 PF13 bidirectional 5 V-tolerant I/O; alternate functions FMC_A7, EVENTOUT.
64 PF14 bidirectional 5 V-tolerant I/O; alternate functions FMC_A8, EVENTOUT.
65 PF15 bidirectional 5 V-tolerant I/O; alternate functions FMC_A9, EVENTOUT.
66 PG0 bidirectional 5 V-tolerant I/O; alternate functions FMC_A10, EVENTOUT.
67 PG1 bidirectional 5 V-tolerant I/O; alternate functions FMC_A11, EVENTOUT.
68 PE7 bidirectional 5 V-tolerant I/O; alternate functions TIM1_ETR, UART7_Rx, FMC_D4, EVENTOUT.
69 PE8 bidirectional 5 V-tolerant I/O; alternate functions TIM1_CH1N, UART7_Tx, FMC_D5, EVENTOUT.
70 PE9 bidirectional 5 V-tolerant I/O; alternate functions TIM1_CH1, FMC_D6, EVENTOUT.
71 VSS power_in Digital ground supply pin.
72 VDD power_in Digital supply pin of 1.7 to 3.6 V for I/O and the internal regulator.
73 PE10 bidirectional 5 V-tolerant I/O; alternate functions TIM1_CH2N, FMC_D7, EVENTOUT.
74 PE11 bidirectional 5 V-tolerant I/O; alternate functions TIM1_CH2, SPI4_NSS, FMC_D8, LCD_G3, EVENTOUT.
75 PE12 bidirectional 5 V-tolerant I/O; alternate functions TIM1_CH3N, SPI4_SCK, FMC_D9, LCD_B4, EVENTOUT.
76 PE13 bidirectional 5 V-tolerant I/O; alternate functions TIM1_CH3, SPI4_MISO, FMC_D10, LCD_DE, EVENTOUT.
77 PE14 bidirectional 5 V-tolerant I/O; alternate functions TIM1_CH4, SPI4_MOSI, FMC_D11, LCD_CLK, EVENTOUT.
78 PE15 bidirectional 5 V-tolerant I/O; alternate functions TIM1_BKIN, FMC_D12, LCD_R7, EVENTOUT.
79 PB10 bidirectional 5 V-tolerant I/O; alternate functions TIM2_CH3, I2C2_SCL, SPI2_SCK/I2S2_CK, USART3_TX, OTG_HS_ULPI_D3, ETH_MII_RX_ER, LCD_G4, EVENTOUT.
80 PB11 bidirectional 5 V-tolerant I/O; alternate functions TIM2_CH4, I2C2_SDA, USART3_RX, OTG_HS_ULPI_D4, ETH_MII_TX_EN/ETH_RMII_TX_EN, LCD_G5, EVENTOUT.
81 VCAP_1 passive Connection for the external 2.2 uF ceramic capacitor (ESR < 2 ohm) that stabilizes the main regulator (100 nF decoupling when regulator is OFF).
82 VDD power_in Digital supply pin of 1.7 to 3.6 V for I/O and the internal regulator.
83 PH6 bidirectional 5 V-tolerant I/O; alternate functions I2C2_SMBA, SPI5_SCK, TIM12_CH1, ETH_MII_RXD2, FMC_SDNE1, DCMI_D8, EVENTOUT.
84 PH7 bidirectional 5 V-tolerant I/O; alternate functions I2C3_SCL, SPI5_MISO, ETH_MII_RXD3, FMC_SDCKE1, DCMI_D9, EVENTOUT.
85 PH8 bidirectional 5 V-tolerant I/O; alternate functions I2C3_SDA, FMC_D16, DCMI_HSYNC, LCD_R2, EVENTOUT.
86 PH9 bidirectional 5 V-tolerant I/O; alternate functions I2C3_SMBA, TIM12_CH2, FMC_D17, DCMI_D0, LCD_R3, EVENTOUT.
87 PH10 bidirectional 5 V-tolerant I/O; alternate functions TIM5_CH1, FMC_D18, DCMI_D1, LCD_R4, EVENTOUT.
88 PH11 bidirectional 5 V-tolerant I/O; alternate functions TIM5_CH2, FMC_D19, DCMI_D2, LCD_R5, EVENTOUT.
89 PH12 bidirectional 5 V-tolerant I/O; alternate functions TIM5_CH3, FMC_D20, DCMI_D3, LCD_R6, EVENTOUT.
90 VSS power_in Digital ground supply pin.
91 VDD power_in Digital supply pin of 1.7 to 3.6 V for I/O and the internal regulator.
92 PB12 bidirectional 5 V-tolerant I/O; alternate functions TIM1_BKIN, I2C2_SMBA, SPI2_NSS/I2S2_WS, USART3_CK, CAN2_RX, OTG_HS_ULPI_D5, ETH_MII_TXD0/ETH_RMII_TXD0, OTG_HS_ID, EVENTOUT.
93 PB13 bidirectional 5 V-tolerant I/O; alternate functions TIM1_CH1N, SPI2_SCK/I2S2_CK, USART3_CTS, CAN2_TX, OTG_HS_ULPI_D6, ETH_MII_TXD1/ETH_RMII_TXD1, EVENTOUT; additional function OTG_HS_VBUS.
94 PB14 bidirectional 5 V-tolerant I/O; alternate functions TIM1_CH2N, TIM8_CH2N, SPI2_MISO, I2S2ext_SD, USART3_RTS, TIM12_CH1, OTG_HS_DM, EVENTOUT.
95 PB15 bidirectional 5 V-tolerant I/O; alternate functions RTC_REFIN, TIM1_CH3N, TIM8_CH3N, SPI2_MOSI/I2S2_SD, TIM12_CH2, OTG_HS_DP, EVENTOUT.
96 PD8 bidirectional 5 V-tolerant I/O; alternate functions USART3_TX, FMC_D13, EVENTOUT.
97 PD9 bidirectional 5 V-tolerant I/O; alternate functions USART3_RX, FMC_D14, EVENTOUT.
98 PD10 bidirectional 5 V-tolerant I/O; alternate functions USART3_CK, FMC_D15, LCD_B3, EVENTOUT.
99 PD11 bidirectional 5 V-tolerant I/O; alternate functions USART3_CTS, FMC_A16, EVENTOUT.
100 PD12 bidirectional 5 V-tolerant I/O; alternate functions TIM4_CH1, USART3_RTS, FMC_A17, EVENTOUT.
101 PD13 bidirectional 5 V-tolerant I/O; alternate functions TIM4_CH2, FMC_A18, EVENTOUT.
102 VSS power_in Digital ground supply pin.
103 VDD power_in Digital supply pin of 1.7 to 3.6 V for I/O and the internal regulator.
104 PD14 bidirectional 5 V-tolerant I/O; alternate functions TIM4_CH3, FMC_D0, EVENTOUT.
105 PD15 bidirectional 5 V-tolerant I/O; alternate functions TIM4_CH4, FMC_D1, EVENTOUT.
106 PG2 bidirectional 5 V-tolerant I/O; alternate functions FMC_A12, EVENTOUT.
107 PG3 bidirectional 5 V-tolerant I/O; alternate functions FMC_A13, EVENTOUT.
108 PG4 bidirectional 5 V-tolerant I/O; alternate functions FMC_A14/FMC_BA0, EVENTOUT.
109 PG5 bidirectional 5 V-tolerant I/O; alternate functions FMC_A15/FMC_BA1, EVENTOUT.
110 PG6 bidirectional 5 V-tolerant I/O; alternate functions FMC_INT2, DCMI_D12, LCD_R7, EVENTOUT.
111 PG7 bidirectional 5 V-tolerant I/O; alternate functions USART6_CK, FMC_INT3, DCMI_D13, LCD_CLK, EVENTOUT.
112 PG8 bidirectional 5 V-tolerant I/O; alternate functions SPI6_NSS, USART6_RTS, ETH_PPS_OUT, FMC_SDCLK, EVENTOUT.
113 VSS power_in Digital ground supply pin.
114 VDD power_in Digital supply pin of 1.7 to 3.6 V for I/O and the internal regulator.
115 PC6 bidirectional 5 V-tolerant I/O; alternate functions TIM3_CH1, TIM8_CH1, I2S2_MCK, USART6_TX, SDIO_D6, DCMI_D0, LCD_HSYNC, EVENTOUT.
116 PC7 bidirectional 5 V-tolerant I/O; alternate functions TIM3_CH2, TIM8_CH2, I2S3_MCK, USART6_RX, SDIO_D7, DCMI_D1, LCD_G6, EVENTOUT.
117 PC8 bidirectional 5 V-tolerant I/O; alternate functions TIM3_CH3, TIM8_CH3, USART6_CK, SDIO_D0, DCMI_D2, EVENTOUT.
118 PC9 bidirectional 5 V-tolerant I/O; alternate functions MCO2, TIM3_CH4, TIM8_CH4, I2C3_SDA, I2S_CKIN, SDIO_D1, DCMI_D3, EVENTOUT.
119 PA8 bidirectional 5 V-tolerant I/O; alternate functions MCO1, TIM1_CH1, I2C3_SCL, USART1_CK, OTG_FS_SOF, LCD_R6, EVENTOUT.
120 PA9 bidirectional 5 V-tolerant I/O; alternate functions TIM1_CH2, I2C3_SMBA, USART1_TX, DCMI_D0, EVENTOUT; additional function OTG_FS_VBUS.
121 PA10 bidirectional 5 V-tolerant I/O; alternate functions TIM1_CH3, USART1_RX, OTG_FS_ID, DCMI_D1, EVENTOUT.
122 PA11 bidirectional 5 V-tolerant I/O; alternate functions TIM1_CH4, USART1_CTS, CAN1_RX, LCD_R4, OTG_FS_DM, EVENTOUT.
123 PA12 bidirectional 5 V-tolerant I/O; alternate functions TIM1_ETR, USART1_RTS, CAN1_TX, LCD_R5, OTG_FS_DP, EVENTOUT.
124 PA13 (JTMS-SWDIO) bidirectional 5 V-tolerant I/O that is JTMS-SWDIO after reset; also EVENTOUT.
125 VCAP_2 passive Connection for the external 2.2 uF ceramic capacitor (ESR < 2 ohm) that stabilizes the main regulator (100 nF decoupling when regulator is OFF).
126 VSS power_in Digital ground supply pin.
127 VDD power_in Digital supply pin of 1.7 to 3.6 V for I/O and the internal regulator.
128 PH13 bidirectional 5 V-tolerant I/O; alternate functions TIM8_CH1N, CAN1_TX, FMC_D21, LCD_G2, EVENTOUT.
129 PH14 bidirectional 5 V-tolerant I/O; alternate functions TIM8_CH2N, FMC_D22, DCMI_D4, LCD_G3, EVENTOUT.
130 PH15 bidirectional 5 V-tolerant I/O; alternate functions TIM8_CH3N, FMC_D23, DCMI_D11, LCD_G4, EVENTOUT.
131 PI0 bidirectional 5 V-tolerant I/O; alternate functions TIM5_CH4, SPI2_NSS/I2S2_WS, FMC_D24, DCMI_D13, LCD_G5, EVENTOUT (not usable for I2S2 full-duplex).
132 PI1 bidirectional 5 V-tolerant I/O; alternate functions SPI2_SCK/I2S2_CK, FMC_D25, DCMI_D8, LCD_G6, EVENTOUT (not usable for I2S2 full-duplex).
133 PI2 bidirectional 5 V-tolerant I/O; alternate functions TIM8_CH4, SPI2_MISO, I2S2ext_SD, FMC_D26, DCMI_D9, LCD_G7, EVENTOUT.
134 PI3 bidirectional 5 V-tolerant I/O; alternate functions TIM8_ETR, SPI2_MOSI/I2S2_SD, FMC_D27, DCMI_D10, EVENTOUT.
135 VSS power_in Digital ground supply pin.
136 VDD power_in Digital supply pin of 1.7 to 3.6 V for I/O and the internal regulator.
137 PA14 (JTCK-SWCLK) bidirectional 5 V-tolerant I/O that is JTCK-SWCLK after reset; also EVENTOUT.
138 PA15 (JTDI) bidirectional 5 V-tolerant I/O that is JTDI after reset; alternate functions TIM2_CH1/TIM2_ETR, SPI1_NSS, SPI3_NSS/I2S3_WS, EVENTOUT.
139 PC10 bidirectional 5 V-tolerant I/O; alternate functions SPI3_SCK/I2S3_CK, USART3_TX, UART4_TX, SDIO_D2, DCMI_D8, LCD_R2, EVENTOUT.
140 PC11 bidirectional 5 V-tolerant I/O; alternate functions I2S3ext_SD, SPI3_MISO, USART3_RX, UART4_RX, SDIO_D3, DCMI_D4, EVENTOUT.
141 PC12 bidirectional 5 V-tolerant I/O; alternate functions SPI3_MOSI/I2S3_SD, USART3_CK, UART5_TX, SDIO_CK, DCMI_D9, EVENTOUT.
142 PD0 bidirectional 5 V-tolerant I/O; alternate functions CAN1_RX, FMC_D2, EVENTOUT.
143 PD1 bidirectional 5 V-tolerant I/O; alternate functions CAN1_TX, FMC_D3, EVENTOUT.
144 PD2 bidirectional 5 V-tolerant I/O; alternate functions TIM3_ETR, UART5_RX, SDIO_CMD, DCMI_D11, EVENTOUT.
145 PD3 bidirectional 5 V-tolerant I/O; alternate functions SPI2_SCK/I2S2_CK, USART2_CTS, FMC_CLK, DCMI_D5, LCD_G7, EVENTOUT.
146 PD4 bidirectional 5 V-tolerant I/O; alternate functions USART2_RTS, FMC_NOE, EVENTOUT.
147 PD5 bidirectional 5 V-tolerant I/O; alternate functions USART2_TX, FMC_NWE, EVENTOUT.
148 VSS power_in Digital ground supply pin.
149 VDD power_in Digital supply pin of 1.7 to 3.6 V for I/O and the internal regulator.
150 PD6 bidirectional 5 V-tolerant I/O; alternate functions SPI3_MOSI/I2S3_SD, SAI1_SD_A, USART2_RX, FMC_NWAIT, DCMI_D10, LCD_B2, EVENTOUT.
151 PD7 bidirectional 5 V-tolerant I/O; alternate functions USART2_CK, FMC_NE1/FMC_NCE2, EVENTOUT.
152 PG9 bidirectional 5 V-tolerant I/O; alternate functions USART6_RX, FMC_NE2/FMC_NCE3, DCMI_VSYNC (silicon revision 3 only), EVENTOUT.
153 PG10 bidirectional 5 V-tolerant I/O; alternate functions LCD_G3, FMC_NCE4_1/FMC_NE3, DCMI_D2, LCD_B2, EVENTOUT.
154 PG11 bidirectional 5 V-tolerant I/O; alternate functions ETH_MII_TX_EN/ETH_RMII_TX_EN, FMC_NCE4_2, DCMI_D3, LCD_B3, EVENTOUT.
155 PG12 bidirectional 5 V-tolerant I/O; alternate functions SPI6_MISO, USART6_RTS, LCD_B4, FMC_NE4, LCD_B1, EVENTOUT.
156 PG13 bidirectional 5 V-tolerant I/O; alternate functions SPI6_SCK, USART6_CTS, ETH_MII_TXD0/ETH_RMII_TXD0, FMC_A24, EVENTOUT.
157 PG14 bidirectional 5 V-tolerant I/O; alternate functions SPI6_MOSI, USART6_TX, ETH_MII_TXD1/ETH_RMII_TXD1, FMC_A25, EVENTOUT.
158 VSS power_in Digital ground supply pin.
159 VDD power_in Digital supply pin of 1.7 to 3.6 V for I/O and the internal regulator.
160 PG15 bidirectional 5 V-tolerant I/O; alternate functions USART6_CTS, FMC_SDNCAS, DCMI_D13, EVENTOUT.
161 PB3 (JTDO/TRACESWO) bidirectional 5 V-tolerant I/O that is JTDO/TRACESWO after reset; alternate functions TIM2_CH2, SPI1_SCK, SPI3_SCK/I2S3_CK, EVENTOUT.
162 PB4 (NJTRST) bidirectional 5 V-tolerant I/O that is NJTRST after reset; alternate functions TIM3_CH1, SPI1_MISO, SPI3_MISO, I2S3ext_SD, EVENTOUT.
163 PB5 bidirectional 5 V-tolerant I/O; alternate functions TIM3_CH2, I2C1_SMBA, SPI1_MOSI, SPI3_MOSI/I2S3_SD, CAN2_RX, OTG_HS_ULPI_D7, ETH_PPS_OUT, FMC_SDCKE1, DCMI_D10, EVENTOUT.
164 PB6 bidirectional 5 V-tolerant I/O; alternate functions TIM4_CH1, I2C1_SCL, USART1_TX, CAN2_TX, FMC_SDNE1, DCMI_D5, EVENTOUT.
165 PB7 bidirectional 5 V-tolerant I/O; alternate functions TIM4_CH2, I2C1_SDA, USART1_RX, FMC_NL, DCMI_VSYNC, EVENTOUT.
166 BOOT0 input Dedicated boot-mode selection pin (VPP function); input voltage range 0 to 9 V.
167 PB8 bidirectional 5 V-tolerant I/O; alternate functions TIM4_CH3, TIM10_CH1, I2C1_SCL, CAN1_RX, ETH_MII_TXD3, SDIO_D4, DCMI_D6, LCD_B6, EVENTOUT.
168 PB9 bidirectional 5 V-tolerant I/O; alternate functions TIM4_CH4, TIM11_CH1, I2C1_SDA, SPI2_NSS/I2S2_WS, CAN1_TX, SDIO_D5, DCMI_D7, LCD_B7, EVENTOUT.
169 PE0 bidirectional 5 V-tolerant I/O; alternate functions TIM4_ETR, UART8_RX, FMC_NBL0, DCMI_D2, EVENTOUT.
170 PE1 bidirectional 5 V-tolerant I/O; alternate functions UART8_Tx, FMC_NBL1, DCMI_D3, EVENTOUT.
171 PDR_ON input Power-down reset control: held high enables the internal power supply supervisor (internal reset ON), connected to an external supervisor to disable it.
172 VDD power_in Digital supply pin of 1.7 to 3.6 V for I/O and the internal regulator.
173 PI4 bidirectional 5 V-tolerant I/O; alternate functions TIM8_BKIN, FMC_NBL2, DCMI_D5, LCD_B4, EVENTOUT.
174 PI5 bidirectional 5 V-tolerant I/O; alternate functions TIM8_CH1, FMC_NBL3, DCMI_VSYNC, LCD_B5, EVENTOUT.
175 PI6 bidirectional 5 V-tolerant I/O; alternate functions TIM8_CH2, FMC_D28, DCMI_D6, LCD_B6, EVENTOUT.
176 PI7 bidirectional 5 V-tolerant I/O; alternate functions TIM8_CH3, FMC_D29, DCMI_D7, LCD_B7, EVENTOUT.

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package LQFP-176(24x24)
Category Embedded Processors & Controllers
Pins 176

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
External main supply voltage (VDD-VSS) VDD-VSS -0.3 4 V including VDDA, VDD and VBAT 91
Current into each VDD_x supply line (source) IVDD 100 mA maximum per VDD_x line 92
Current out of each VSS_x ground line (sink) IVSS -100 mA maximum per VSS_x line 92
Output sink current, any I/O and control pin IIO 25 mA 92
Output source current, any I/O and control pin IIO -25 mA 92
Storage temperature range TSTG -65 150 °C 92
Maximum junction temperature TJ 125 °C 92
Internal AHB clock frequency fHCLK 0 180 MHz power scale 1 (VOS=0x11), regulator ON, overdrive ON 93
Standard operating voltage VDD 1.7 3.6 V 94
Analog operating voltage VDDA 1.7 2.4 V ADC limited to 1.2 Msps; must be equal potential with VDD 94
Analog operating voltage VDDA 2.4 3.6 V ADC limited to 2.4 Msps 94
Backup operating voltage VBAT 1.65 3.6 V 94
Internal 1.2 V voltage on VCAP_1/VCAP_2 (regulator ON) V12 1.26 1.32 1.4 V power scale 1 (VOS=0x11), HCLK max frequency 168 MHz (overdrive OFF) or 180 MHz (overdrive ON) 94
Input voltage on RST and FT pins VIN -0.3 5.5 V 2 V ≤ VDD ≤ 3.6 V 94
Input voltage on BOOT0 pin VIN 0 9 V 94
Ambient temperature, suffix 6, maximum power dissipation TA -40 85 °C suffix 6 version 94
Junction temperature range, suffix 6 TJ -40 105 °C suffix 6 version 95
Power-on/power-down reset threshold, falling edge VPOR/PDR 1.6 1.68 1.76 V falling edge 97
Supply current in run mode IDD 98 141 mA fHCLK 180 MHz, all peripherals enabled, executing from Flash with ART enabled; typ at TA=25 °C, max at TA=105 °C 100
Wakeup time from standby mode tWUSTDBY 318 412 µs max given at -40 °C 115
Oscillator frequency (HSE) fOSC_IN 4 26 MHz HSE crystal/resonator oscillator 118
HSE accuracy ACCHSE -500 500 ppm must meet USB specification 118
HSE oscillator start-up time tSU(HSE) 2 ms from VDD stable 118
HSI oscillator frequency fHSI 16 MHz 120
HSI oscillator accuracy, user trimmed ACCHSI -1 1 % user adjustment via RCC_CR register 120
HSI oscillator accuracy, factory calibrated ACCHSI -8 4.5 % factory calibrated, TA = -40 to 105 °C 120
HSI oscillator accuracy, factory calibrated ACCHSI -4 4 % factory calibrated, TA = -10 to 85 °C 120
HSI oscillator accuracy, factory calibrated ACCHSI -1 1 % factory calibrated, TA = 25 °C 120
LSI oscillator frequency fLSI 17 32 47 kHz VDD = 3 V, TA = -40 to 105 °C 120
Main PLL input clock fPLL_IN 0.95 1 2.1 MHz 121
Main PLL output clock fPLL_OUT 24 180 MHz 121
Main PLL VCO output fVCO_OUT 192 432 MHz 121
PLL lock time tLOCK 75 200 µs VCO frequency = 192 MHz 121
PLL lock time tLOCK 100 300 µs VCO frequency = 432 MHz 121
Pull-up equivalent resistance RPU 30 40 50 kΩ VIN = VSS, all pins except PA10/PB12 132
Pull-up equivalent resistance, OTG ID pins RPU 7 10 14 kΩ PA10/PB12 (OTG_FS_ID, OTG_HS_ID) 132
I/O pin capacitance CIO 5 pF 132
I/O input leakage current Ilkg -1 1 µA VSS ≤ VIN ≤ VDD 132
Output low-level voltage, CMOS port VOL 0.4 V IIO = +8 mA, 2.7 V ≤ VDD ≤ 3.6 V 134
NRST pull-up equivalent resistance RPU 30 40 50 kΩ VIN = VSS 136
NRST internal reset pulse duration TNRST_OUT 20 µs internal reset source 136
SPI master clock frequency, SPI1/4/5/6 fSCK 45 MHz master mode, 2.7 V ≤ VDD ≤ 3.6 V 140
USB OTG FS output low voltage VOL 0.3 V 1.5 kΩ RL to 3.6 V 147
USB OTG FS output high voltage VOH 2.8 3.6 V 15 kΩ RL to VSS 147
USB OTG FS output rise time tr 4 20 ns CL = 50 pF 148
USB OTG FS output fall time tf 4 20 ns CL = 50 pF 148
USB OTG FS output driver impedance ZDRV 28 44 Ω driving high or low 148
ADC clock frequency fADC 0.6 15 18 MHz VDDA = 1.7 to 2.4 V 153
ADC clock frequency fADC 0.6 30 36 MHz VDDA = 2.4 to 3.6 V 153
ADC supply current in conversion mode IVDDA 1.6 1.8 mA conversion mode 153
Temperature sensor linearity TL -2 2 °C VSENSE linearity vs temperature 159
Temperature sensor average slope Avg_Slope 2.5 mV/°C 159
Internal reference voltage VREFINT 1.18 1.21 1.24 V TA = -40 to +105 °C 159
DAC load resistance, buffer ON RLOAD 5 kΩ buffer enabled 160
DAC quiescent VDDA supply current IDDA 280 380 µA no load, mid-code input (0x800) 161
DAC integral non-linearity, 12-bit INL -4 4 LSB 12-bit configuration 161
DAC differential non-linearity, 10-bit DNL -0.5 0.5 LSB 10-bit configuration 161

CAD (KiCad official)

  • Symbol: STM32F429IIT6
  • Footprint: Package_QFP:LQFP-176_24x24mm_P0.5mm
  • 3D model: LQFP-176(24x24) (KiCad packages3D, STEP)
  • 3D model files: stm32f429iit6-etched.step / stm32f429iit6-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); stm32f429iit6.step / stm32f429iit6.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (226 pp, sha256 9eccb942b0df757c, retrieved 2026-11-05, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF