Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

PIC18F4680-E

Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · TQFP-44(10x10)

PIC18F4680-E from Microchip Tech, in a TQFP-44(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 RC7/RX/DT bidirectional Digital I/O with Schmitt Trigger input; serves as EUSART asynchronous receive (RX) or synchronous data (DT) pin.
2 RD4/PSP4/ECCP1/P1A bidirectional Digital I/O with Schmitt Trigger input; also Parallel Slave Port data bit 4, ECCP1 capture/compare, and ECCP1 PWM output channel A (P1A).
3 RD5/PSP5/P1B bidirectional Digital I/O with Schmitt Trigger input; also Parallel Slave Port data bit 5 and ECCP1 Enhanced PWM output channel B (P1B).
4 RD6/PSP6/P1C bidirectional Digital I/O with Schmitt Trigger input; also Parallel Slave Port data bit 6 and ECCP1 Enhanced PWM output channel C (P1C).
5 RD7/PSP7/P1D bidirectional Digital I/O with Schmitt Trigger input; also Parallel Slave Port data bit 7 and ECCP1 Enhanced PWM output channel D (P1D).
6 VSS power_in Ground reference for logic and I/O pins.
7 VDD power_in Positive supply for logic and I/O pins.
8 RB0/INT0/FLT0/AN10 bidirectional Digital I/O with weak pull-up option; also external interrupt 0, ECCP1 PWM Fault input (FLT0), and A/D analog input channel 10.
9 RB1/INT1/AN8 bidirectional Digital I/O with weak pull-up option; also external interrupt 1 and A/D analog input channel 8.
10 RB2/INT2/CANTX bidirectional Digital I/O with weak pull-up option; also external interrupt 2 and CAN bus transmit output (CANTX).
11 RB3/CANRX bidirectional Digital I/O with weak pull-up option; also CAN bus receive input (CANRX), which must be set as a digital input in TRISB<3>.
12 NC unconnected No connect.
13 NC unconnected No connect.
14 RB4/KBI0/AN9 bidirectional Digital I/O with weak pull-up option; also interrupt-on-pin-change KBI0 and A/D analog input channel 9.
15 RB5/KBI1/PGM bidirectional Digital I/O with weak pull-up option; also interrupt-on-pin-change KBI1 and low-voltage ICSP programming enable (PGM).
16 RB6/KBI2/PGC bidirectional Digital I/O with weak pull-up option; also interrupt-on-pin-change KBI2 and the in-circuit debugger / ICSP programming clock (PGC).
17 RB7/KBI3/PGD bidirectional Digital I/O with weak pull-up option; also interrupt-on-pin-change KBI3 and the in-circuit debugger / ICSP programming data (PGD).
18 MCLR/VPP/RE3 input Active-low Master Clear Reset input (MCLR), or programming voltage input (VPP); RE3 is a digital input available only when MCLR is disabled.
19 RA0/AN0/CVREF bidirectional Digital I/O; also A/D analog input channel 0 and comparator voltage reference analog output (CVREF).
20 RA1/AN1 bidirectional Digital I/O; also A/D analog input channel 1.
21 RA2/AN2/VREF- bidirectional Digital I/O; also A/D analog input channel 2 and A/D and comparator negative voltage reference input (VREF-).
22 RA3/AN3/VREF+ bidirectional Digital I/O; also A/D analog input channel 3 and A/D and comparator positive voltage reference input (VREF+).
23 RA4/T0CKI bidirectional Digital I/O; also Timer0 external clock input (T0CKI) with Schmitt Trigger input.
24 RA5/AN4/SS/HLVDIN bidirectional Digital I/O; also A/D analog input channel 4, MSSP SPI slave select input (SS), and High/Low-Voltage Detect external trip point input (HLVDIN).
25 RE0/RD/AN5 bidirectional Digital I/O with Schmitt Trigger input; also Parallel Slave Port read enable input (RD) and A/D analog input channel 5.
26 RE1/WR/AN6/C1OUT bidirectional Digital I/O with Schmitt Trigger input; also Parallel Slave Port write enable input (WR), A/D analog input channel 6, and Comparator 1 output (C1OUT).
27 RE2/CS/AN7/C2OUT bidirectional Digital I/O with Schmitt Trigger input; also Parallel Slave Port chip select input (CS), A/D analog input channel 7, and Comparator 2 output (C2OUT).
28 VDD power_in Positive supply for logic and I/O pins.
29 VSS power_in Ground reference for logic and I/O pins.
30 OSC1/CLKI/RA7 input Oscillator crystal or external clock input (OSC1/CLKI); can alternatively be configured as general purpose I/O RA7 depending on the oscillator mode.
31 OSC2/CLKO/RA6 output Oscillator crystal output or clock output (OSC2/CLKO, FOSC/4 in RC/EC modes); can alternatively be configured as general purpose I/O RA6 depending on the oscillator mode.
32 RC0/T1OSO/T13CKI bidirectional Digital I/O with Schmitt Trigger input; also Timer1 oscillator output (T1OSO) and Timer1/Timer3 external clock input (T13CKI).
33 NC unconnected No connect.
34 NC unconnected No connect.
35 RC1/T1OSI bidirectional Digital I/O with Schmitt Trigger input; also Timer1 oscillator input (T1OSI), which overrides TRISC<1> when enabled.
36 RC2/CCP1 bidirectional Digital I/O with Schmitt Trigger input; also CCP1 capture input or compare/PWM output.
37 RC3/SCK/SCL bidirectional Digital I/O with Schmitt Trigger input; also MSSP serial clock input/output for SPI mode (SCK) or I2C mode (SCL).
38 RD0/PSP0/C1IN+ bidirectional Digital I/O with Schmitt Trigger input; also Parallel Slave Port data bit 0 and Comparator 1 positive input (C1IN+).
39 RD1/PSP1/C1IN- bidirectional Digital I/O with Schmitt Trigger input; also Parallel Slave Port data bit 1 and Comparator 1 negative input (C1IN-).
40 RD2/PSP2/C2IN+ bidirectional Digital I/O with Schmitt Trigger input; also Parallel Slave Port data bit 2 and Comparator 2 positive input (C2IN+).
41 RD3/PSP3/C2IN- bidirectional Digital I/O with Schmitt Trigger input; also Parallel Slave Port data bit 3 and Comparator 2 negative input (C2IN-).
42 RC4/SDI/SDA bidirectional Digital I/O with Schmitt Trigger input; also MSSP SPI data input (SDI) or I2C data I/O (SDA).
43 RC5/SDO bidirectional Digital I/O with Schmitt Trigger input; also MSSP SPI data output (SDO).
44 RC6/TX/CK bidirectional Digital I/O with Schmitt Trigger input; also EUSART asynchronous transmit (TX) or synchronous clock (CK).

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package TQFP-44(10x10)
Category Single Chip Microcomputer/Microcontroller
Pins 44

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Wide operating voltage range (VDD) 2 5.5 V Wide operating voltage range (features list) 1
High current sink (per feature highlight) 25 mA High current sink/source 25 mA/25 mA (peripheral highlights) 1
High current source (per feature highlight) 25 mA High current sink/source 25 mA/25 mA (peripheral highlights) 1
Crystal and external clock frequency 40 MHz Four crystal modes and two external clock modes, up to 40 MHz 1
PLL output frequency with internal oscillator 32 MHz PLL enabled in INTOSC modes, clock output up to 32 MHz 21
Internal oscillator selectable frequency range 31 kHz 8 user-selectable frequencies, from 31 kHz 1
Internal oscillator selectable frequency maximum 8 MHz 8 user-selectable frequencies, up to 8 MHz 1
Flash and data EEPROM retention 40 years Flash/Data EEPROM retention > 40 years 1
Flash program memory endurance 100000 erase/write cycles Enhanced Flash program memory, typical 1
Data EEPROM endurance 1e+06 erase/write cycles Data EEPROM memory, typical 1
Sleep mode current 0.1 A Sleep mode currents down to 0.1 A typical (unit as extracted) 1
Idle mode current 5.8 A Idle mode currents down to 5.8 A typical (unit as extracted) 1
Timer1 oscillator current 1.1 A Timer1 oscillator 32 kHz, 2V (unit as extracted) 1
Watchdog Timer current 2.1 A Watchdog Timer (unit as extracted) 1
Extended WDT programmable period minimum 41 ms Extended Watchdog Timer programmable period from 41 ms 1
Extended WDT programmable period maximum 131 s Extended Watchdog Timer programmable period up to 131 s 1
External RC oscillator resistor REXT REXT 3 100 k RC oscillator mode, recommended values 23
External RC oscillator capacitor CEXT CEXT 20 pF RC oscillator mode, recommended CEXT > 20 pF 23
MCLR pull-up resistor 1 10 k Tie MCLR through resistor to VDD for POR 40
External POR circuit series resistor R R 40 k Slow VDD power-up external POR circuit, R < 40 k recommended 40
Maximum recommended analog source impedance (A/D) 2.5 k A/D analog input, maximum recommended impedance for analog sources 243
Maximum recommended analog source impedance (comparator) RS 10 k Comparator analog input, RS < 10k recommended 252
Comparator analog input leakage current ILEAKAGE -500 500 nA Leakage current at the pin due to various junctions, +/-500 nA 252
A/D minimum TAD TAD 2 s Approximately 2 us minimum TAD, see parameter 130 (unit as extracted) 243

CAD (KiCad official)

  • Symbol: PIC18F4680-E
  • Footprint: Package_QFP:TQFP-44_10x10mm_P0.8mm
  • 3D model: TQFP-44(10x10) (KiCad packages3D, STEP)
  • 3D model files: pic18f4680-e-pt-etched.step / pic18f4680-e-pt-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); pic18f4680-e-pt.step / pic18f4680-e-pt.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (453 pp, sha256 74abd6f935fb9ac4, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF