component
PIC18F4680-E/PT
Public Made by Adomby adom
Microchip Tech Microcontroller Units (MCUs/MPUs/SOCs), TQFP-44(10x10). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
Generated by kicad-footprint-generator · KiCad file format 20260206
PIC18F4680-E
Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · TQFP-44(10x10)
PIC18F4680-E from Microchip Tech, in a TQFP-44(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RC7/RX/DT | bidirectional | Digital I/O with Schmitt Trigger input; serves as EUSART asynchronous receive (RX) or synchronous data (DT) pin. |
| 2 | RD4/PSP4/ECCP1/P1A | bidirectional | Digital I/O with Schmitt Trigger input; also Parallel Slave Port data bit 4, ECCP1 capture/compare, and ECCP1 PWM output channel A (P1A). |
| 3 | RD5/PSP5/P1B | bidirectional | Digital I/O with Schmitt Trigger input; also Parallel Slave Port data bit 5 and ECCP1 Enhanced PWM output channel B (P1B). |
| 4 | RD6/PSP6/P1C | bidirectional | Digital I/O with Schmitt Trigger input; also Parallel Slave Port data bit 6 and ECCP1 Enhanced PWM output channel C (P1C). |
| 5 | RD7/PSP7/P1D | bidirectional | Digital I/O with Schmitt Trigger input; also Parallel Slave Port data bit 7 and ECCP1 Enhanced PWM output channel D (P1D). |
| 6 | VSS | power_in | Ground reference for logic and I/O pins. |
| 7 | VDD | power_in | Positive supply for logic and I/O pins. |
| 8 | RB0/INT0/FLT0/AN10 | bidirectional | Digital I/O with weak pull-up option; also external interrupt 0, ECCP1 PWM Fault input (FLT0), and A/D analog input channel 10. |
| 9 | RB1/INT1/AN8 | bidirectional | Digital I/O with weak pull-up option; also external interrupt 1 and A/D analog input channel 8. |
| 10 | RB2/INT2/CANTX | bidirectional | Digital I/O with weak pull-up option; also external interrupt 2 and CAN bus transmit output (CANTX). |
| 11 | RB3/CANRX | bidirectional | Digital I/O with weak pull-up option; also CAN bus receive input (CANRX), which must be set as a digital input in TRISB<3>. |
| 12 | NC | unconnected | No connect. |
| 13 | NC | unconnected | No connect. |
| 14 | RB4/KBI0/AN9 | bidirectional | Digital I/O with weak pull-up option; also interrupt-on-pin-change KBI0 and A/D analog input channel 9. |
| 15 | RB5/KBI1/PGM | bidirectional | Digital I/O with weak pull-up option; also interrupt-on-pin-change KBI1 and low-voltage ICSP programming enable (PGM). |
| 16 | RB6/KBI2/PGC | bidirectional | Digital I/O with weak pull-up option; also interrupt-on-pin-change KBI2 and the in-circuit debugger / ICSP programming clock (PGC). |
| 17 | RB7/KBI3/PGD | bidirectional | Digital I/O with weak pull-up option; also interrupt-on-pin-change KBI3 and the in-circuit debugger / ICSP programming data (PGD). |
| 18 | MCLR/VPP/RE3 | input | Active-low Master Clear Reset input (MCLR), or programming voltage input (VPP); RE3 is a digital input available only when MCLR is disabled. |
| 19 | RA0/AN0/CVREF | bidirectional | Digital I/O; also A/D analog input channel 0 and comparator voltage reference analog output (CVREF). |
| 20 | RA1/AN1 | bidirectional | Digital I/O; also A/D analog input channel 1. |
| 21 | RA2/AN2/VREF- | bidirectional | Digital I/O; also A/D analog input channel 2 and A/D and comparator negative voltage reference input (VREF-). |
| 22 | RA3/AN3/VREF+ | bidirectional | Digital I/O; also A/D analog input channel 3 and A/D and comparator positive voltage reference input (VREF+). |
| 23 | RA4/T0CKI | bidirectional | Digital I/O; also Timer0 external clock input (T0CKI) with Schmitt Trigger input. |
| 24 | RA5/AN4/SS/HLVDIN | bidirectional | Digital I/O; also A/D analog input channel 4, MSSP SPI slave select input (SS), and High/Low-Voltage Detect external trip point input (HLVDIN). |
| 25 | RE0/RD/AN5 | bidirectional | Digital I/O with Schmitt Trigger input; also Parallel Slave Port read enable input (RD) and A/D analog input channel 5. |
| 26 | RE1/WR/AN6/C1OUT | bidirectional | Digital I/O with Schmitt Trigger input; also Parallel Slave Port write enable input (WR), A/D analog input channel 6, and Comparator 1 output (C1OUT). |
| 27 | RE2/CS/AN7/C2OUT | bidirectional | Digital I/O with Schmitt Trigger input; also Parallel Slave Port chip select input (CS), A/D analog input channel 7, and Comparator 2 output (C2OUT). |
| 28 | VDD | power_in | Positive supply for logic and I/O pins. |
| 29 | VSS | power_in | Ground reference for logic and I/O pins. |
| 30 | OSC1/CLKI/RA7 | input | Oscillator crystal or external clock input (OSC1/CLKI); can alternatively be configured as general purpose I/O RA7 depending on the oscillator mode. |
| 31 | OSC2/CLKO/RA6 | output | Oscillator crystal output or clock output (OSC2/CLKO, FOSC/4 in RC/EC modes); can alternatively be configured as general purpose I/O RA6 depending on the oscillator mode. |
| 32 | RC0/T1OSO/T13CKI | bidirectional | Digital I/O with Schmitt Trigger input; also Timer1 oscillator output (T1OSO) and Timer1/Timer3 external clock input (T13CKI). |
| 33 | NC | unconnected | No connect. |
| 34 | NC | unconnected | No connect. |
| 35 | RC1/T1OSI | bidirectional | Digital I/O with Schmitt Trigger input; also Timer1 oscillator input (T1OSI), which overrides TRISC<1> when enabled. |
| 36 | RC2/CCP1 | bidirectional | Digital I/O with Schmitt Trigger input; also CCP1 capture input or compare/PWM output. |
| 37 | RC3/SCK/SCL | bidirectional | Digital I/O with Schmitt Trigger input; also MSSP serial clock input/output for SPI mode (SCK) or I2C mode (SCL). |
| 38 | RD0/PSP0/C1IN+ | bidirectional | Digital I/O with Schmitt Trigger input; also Parallel Slave Port data bit 0 and Comparator 1 positive input (C1IN+). |
| 39 | RD1/PSP1/C1IN- | bidirectional | Digital I/O with Schmitt Trigger input; also Parallel Slave Port data bit 1 and Comparator 1 negative input (C1IN-). |
| 40 | RD2/PSP2/C2IN+ | bidirectional | Digital I/O with Schmitt Trigger input; also Parallel Slave Port data bit 2 and Comparator 2 positive input (C2IN+). |
| 41 | RD3/PSP3/C2IN- | bidirectional | Digital I/O with Schmitt Trigger input; also Parallel Slave Port data bit 3 and Comparator 2 negative input (C2IN-). |
| 42 | RC4/SDI/SDA | bidirectional | Digital I/O with Schmitt Trigger input; also MSSP SPI data input (SDI) or I2C data I/O (SDA). |
| 43 | RC5/SDO | bidirectional | Digital I/O with Schmitt Trigger input; also MSSP SPI data output (SDO). |
| 44 | RC6/TX/CK | bidirectional | Digital I/O with Schmitt Trigger input; also EUSART asynchronous transmit (TX) or synchronous clock (CK). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | TQFP-44(10x10) |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 44 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Wide operating voltage range (VDD) | 2 | 5.5 | V | Wide operating voltage range (features list) | 1 | ||
| High current sink (per feature highlight) | 25 | mA | High current sink/source 25 mA/25 mA (peripheral highlights) | 1 | |||
| High current source (per feature highlight) | 25 | mA | High current sink/source 25 mA/25 mA (peripheral highlights) | 1 | |||
| Crystal and external clock frequency | 40 | MHz | Four crystal modes and two external clock modes, up to 40 MHz | 1 | |||
| PLL output frequency with internal oscillator | 32 | MHz | PLL enabled in INTOSC modes, clock output up to 32 MHz | 21 | |||
| Internal oscillator selectable frequency range | 31 | kHz | 8 user-selectable frequencies, from 31 kHz | 1 | |||
| Internal oscillator selectable frequency maximum | 8 | MHz | 8 user-selectable frequencies, up to 8 MHz | 1 | |||
| Flash and data EEPROM retention | 40 | years | Flash/Data EEPROM retention > 40 years | 1 | |||
| Flash program memory endurance | 100000 | erase/write cycles | Enhanced Flash program memory, typical | 1 | |||
| Data EEPROM endurance | 1e+06 | erase/write cycles | Data EEPROM memory, typical | 1 | |||
| Sleep mode current | 0.1 | A | Sleep mode currents down to 0.1 A typical (unit as extracted) | 1 | |||
| Idle mode current | 5.8 | A | Idle mode currents down to 5.8 A typical (unit as extracted) | 1 | |||
| Timer1 oscillator current | 1.1 | A | Timer1 oscillator 32 kHz, 2V (unit as extracted) | 1 | |||
| Watchdog Timer current | 2.1 | A | Watchdog Timer (unit as extracted) | 1 | |||
| Extended WDT programmable period minimum | 41 | ms | Extended Watchdog Timer programmable period from 41 ms | 1 | |||
| Extended WDT programmable period maximum | 131 | s | Extended Watchdog Timer programmable period up to 131 s | 1 | |||
| External RC oscillator resistor REXT | REXT | 3 | 100 | k | RC oscillator mode, recommended values | 23 | |
| External RC oscillator capacitor CEXT | CEXT | 20 | pF | RC oscillator mode, recommended CEXT > 20 pF | 23 | ||
| MCLR pull-up resistor | 1 | 10 | k | Tie MCLR through resistor to VDD for POR | 40 | ||
| External POR circuit series resistor R | R | 40 | k | Slow VDD power-up external POR circuit, R < 40 k recommended | 40 | ||
| Maximum recommended analog source impedance (A/D) | 2.5 | k | A/D analog input, maximum recommended impedance for analog sources | 243 | |||
| Maximum recommended analog source impedance (comparator) | RS | 10 | k | Comparator analog input, RS < 10k recommended | 252 | ||
| Comparator analog input leakage current | ILEAKAGE | -500 | 500 | nA | Leakage current at the pin due to various junctions, +/-500 nA | 252 | |
| A/D minimum TAD | TAD | 2 | s | Approximately 2 us minimum TAD, see parameter 130 (unit as extracted) | 243 |
CAD (KiCad official)
- Symbol:
PIC18F4680-E - Footprint:
Package_QFP:TQFP-44_10x10mm_P0.8mm - 3D model: TQFP-44(10x10) (KiCad packages3D, STEP)
- 3D model files:
pic18f4680-e-pt-etched.step/pic18f4680-e-pt-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pic18f4680-e-pt.step/pic18f4680-e-pt.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (453 pp, sha256
74abd6f935fb9ac4, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).