Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

INA206AIPWR

Texas Instruments · Current Sense Amplifiers · TSSOP-14

INA206AIPWR from Texas Instruments, in a TSSOP-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 Vs power_in Power supply input, operating range 2.7 V to 18 V
2 OUT output Amplified shunt voltage output, gain 20 V/V
3 CMP1 IN- input Comparator 1 negative input, 0 V to VS - 1.5 V, can override internal 0.6 V reference
4 CMP1 IN+ input Comparator 1 positive input, 0 V to VS - 1.5 V
5 CMP2 IN- input Comparator 2 negative input, 0 V to VS - 1.5 V
6 CMP2 IN+ input Comparator 2 positive input, 0 V to VS - 1.5 V, can override internal 0.6 V reference
7 GND power_in Ground
8 CMP1 RESET input Comparator 1 output reset, active low, 1.1 V threshold
9 CMP2 DELAY input Capacitor pin for comparator 2 delay adjustment, voltage range 0 V to 10 V
10 CMP2 OUT tri_state Comparator 2 open-drain output, low level 220 mV to 300 mV at 2.35 mA
11 CMP1 OUT tri_state Comparator 1 open-drain output, low level 220 mV to 300 mV at 2.35 mA
12 1.2V REF OUT power_out 1.2 V reference voltage output
13 VIN- power_in Shunt low side input, common-mode range -16 V to 80 V
14 VIN+ power_in Shunt high side input, common-mode range -16 V to 80 V

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package TSSOP-14
Category Amplifiers/Comparators
Pins 14

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Common-mode input voltage Vcm -16 12 80 V 5
Operating supply voltage Vs 2.7 12 18 V 5
Operating free-air temperature TA -40 25 125 ºC 5
Supply voltage Vs 18 V 5
Current-shunt monitor analog inputs, differential (VIN+) – (VIN–) -18 18 V 5
VIN+ and VIN– common-mode -16 80 V 5
Comparator output, out pin 18 V 5
VREF and CMP2 delay pin 10 V 5
Input current into any pin 5 mA 5
Operating temperature -55 150 °C 5
Junction temperature -65 150 °C 5
Storage temperature Tstg -65 150 °C 5
Junction-to-ambient thermal resistance RθJA 112.6 °C/W PW (TSSOP) 14 pins 5
Junction-to-case (top) thermal resistance RθJC(top) 37.2 °C/W PW (TSSOP) 14 pins 5
Junction-to-board thermal resistance RθJB 55.4 °C/W PW (TSSOP) 14 pins 5
Junction-to-top characterization parameter ψJT 2.7 °C/W PW (TSSOP) 14 pins 5
Junction-to-board characterization parameter ψJB 54.7 °C/W PW (TSSOP) 14 pins 5
Junction-to-case (bottom) thermal resistance RθJC(bot) 150 °C/W PW (TSSOP) 14 pins 5
Thermal resistance, surface-mount θJA 150 °C/W SO-14, TSSOP-14 surface-mount 8
Common-mode input voltage range VCM -16 80 V TA = –40°C to 125°C 6
Common-mode rejection ratio CMRR 80 100 dB VIN+ = –16 V to 80 V 6
Common-mode rejection ratio over temperature CMRR 100 123 dB VIN+ = 12 V to 80 V, TA = –40°C to 125°C 6
Offset voltage RTI VOS -2.5 0.5 2.5 mV TA = 25°C 6
Offset voltage RTI VOS -3 3 mV TA = 25°C to 125°C 6
Offset voltage RTI VOS -3.5 3.5 mV TA = –40°C to 25°C 6
Offset voltage RTI vs power supply (PSR) 2.5 100 µV/V VOUT = 2 V, VIN+ = 18 V, 2.7 V, TA = –40°C to 125°C 6
Input bias current, VIN– pin IB -16 9 16 µA TA = –40°C to 125°C 6
Gain error -1 0.2 1 % VSENSE = 20 mV to 100 mV 6
Gain error over temperature -2 2 % VSENSE = 20 mV to 100 mV, TA = –40°C to 125°C 6
Total output error -2.2 0.75 2.2 % VSENSE = 120 mV, VS = 16 V 6
Total output error over temperature -3.5 3.5 % VSENSE = 120 mV, VS = 16 V, TA = –40°C to 125°C 6
Nonlinearity error -0.002 0.002 % VSENSE = 20 mV to 100 mV 6
Maximum capacitive load 10 nF No Sustained Oscillation 6
Output voltage (VSENSE < 20 mV), INA206 variant 300 mV VSENSE < 20 mV, –16 V ≤ VCM < 0 V 6
Output voltage (VSENSE < 20 mV), INA206 variant 0.4 V VSENSE < 20 mV, 0 V ≤ VCM ≤ VS 6
Comparator 1 offset voltage drift -2 2 µV/°C TA = –40°C to 125°C 7
Comparator threshold 590 608 620 mV TA = 25°C 7
Comparator threshold over temperature 586 625 mV TA = –40°C to 125°C 7
Comparator input bias current, CMP1 IN+ and CMP2 IN– IB 0.005 10 nA 7
Comparator input range, CMP1 IN+ and CMP2 IN– 0 V 7
Comparator input range, pins 3 and 6 (14-pin packages) 0 V Pins 3 and 6 (14-pin packages only) 7
High-level output current 0.0001 1 µA VID = 0.4 V, VOH = VS 7
Low-level output voltage 220 300 mV VID = –0.6 V, IOL = 2.35 mA 7
Minimum RESET pulse width 1.5 µs 7
Reference output voltage (1.2 V) 1.2VREFOUT 1.188 1.2 1.212 V 8
Reference drift (1.2 V) dVOUT/dT 40 100 ppm/°C TA = –40°C to 85°C 8
Reference drift (0.6 VREF, pins 3 and 6 of 14-pin packages) dVOUT/dT 40 100 ppm/°C TA = –40°C to 85°C 8
Load regulation, sourcing dVOUT/dILOAD 0.4 2 mV/mA 0 mA < ISOURCE < 0.5 mA 8
Reference maximum capacitive load 10 nF No Sustained Oscillations 8
Operating power supply VS 2.7 18 V TA = –40°C to 125°C 8
Quiescent current IQ 1.8 2.2 mA VOUT = 2 V 8
Quiescent current over temperature IQ 2.8 mA VSENSE = 0 mV, TA = –40°C to 125°C 8
Specified temperature range -40 125 °C 8

CAD (KiCad official)

  • Symbol: INA206AIPWR
  • Footprint: Package_SO:TSSOP-14_4.4x5mm_P0.65mm
  • 3D model: TSSOP-14 (KiCad packages3D, STEP)
  • 3D model files: ina206aipwr-etched.step / ina206aipwr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ina206aipwr.step / ina206aipwr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (42 pp, sha256 5ef2c4404a53eb9f, retrieved 2026-10-06, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF