3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownINA206AIPWR
Texas Instruments · Current Sense Amplifiers · TSSOP-14
INA206AIPWR from Texas Instruments, in a TSSOP-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Vs | power_in | Power supply input, operating range 2.7 V to 18 V |
| 2 | OUT | output | Amplified shunt voltage output, gain 20 V/V |
| 3 | CMP1 IN- | input | Comparator 1 negative input, 0 V to VS - 1.5 V, can override internal 0.6 V reference |
| 4 | CMP1 IN+ | input | Comparator 1 positive input, 0 V to VS - 1.5 V |
| 5 | CMP2 IN- | input | Comparator 2 negative input, 0 V to VS - 1.5 V |
| 6 | CMP2 IN+ | input | Comparator 2 positive input, 0 V to VS - 1.5 V, can override internal 0.6 V reference |
| 7 | GND | power_in | Ground |
| 8 | CMP1 RESET | input | Comparator 1 output reset, active low, 1.1 V threshold |
| 9 | CMP2 DELAY | input | Capacitor pin for comparator 2 delay adjustment, voltage range 0 V to 10 V |
| 10 | CMP2 OUT | tri_state | Comparator 2 open-drain output, low level 220 mV to 300 mV at 2.35 mA |
| 11 | CMP1 OUT | tri_state | Comparator 1 open-drain output, low level 220 mV to 300 mV at 2.35 mA |
| 12 | 1.2V REF OUT | power_out | 1.2 V reference voltage output |
| 13 | VIN- | power_in | Shunt low side input, common-mode range -16 V to 80 V |
| 14 | VIN+ | power_in | Shunt high side input, common-mode range -16 V to 80 V |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TSSOP-14 |
| Category | Amplifiers/Comparators |
| Pins | 14 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Common-mode input voltage | Vcm | -16 | 12 | 80 | V | 5 | |
| Operating supply voltage | Vs | 2.7 | 12 | 18 | V | 5 | |
| Operating free-air temperature | TA | -40 | 25 | 125 | ºC | 5 | |
| Supply voltage | Vs | 18 | V | 5 | |||
| Current-shunt monitor analog inputs, differential | (VIN+) – (VIN–) | -18 | 18 | V | 5 | ||
| VIN+ and VIN– common-mode | -16 | 80 | V | 5 | |||
| Comparator output, out pin | 18 | V | 5 | ||||
| VREF and CMP2 delay pin | 10 | V | 5 | ||||
| Input current into any pin | 5 | mA | 5 | ||||
| Operating temperature | -55 | 150 | °C | 5 | |||
| Junction temperature | -65 | 150 | °C | 5 | |||
| Storage temperature | Tstg | -65 | 150 | °C | 5 | ||
| Junction-to-ambient thermal resistance | RθJA | 112.6 | °C/W | PW (TSSOP) 14 pins | 5 | ||
| Junction-to-case (top) thermal resistance | RθJC(top) | 37.2 | °C/W | PW (TSSOP) 14 pins | 5 | ||
| Junction-to-board thermal resistance | RθJB | 55.4 | °C/W | PW (TSSOP) 14 pins | 5 | ||
| Junction-to-top characterization parameter | ψJT | 2.7 | °C/W | PW (TSSOP) 14 pins | 5 | ||
| Junction-to-board characterization parameter | ψJB | 54.7 | °C/W | PW (TSSOP) 14 pins | 5 | ||
| Junction-to-case (bottom) thermal resistance | RθJC(bot) | 150 | °C/W | PW (TSSOP) 14 pins | 5 | ||
| Thermal resistance, surface-mount | θJA | 150 | °C/W | SO-14, TSSOP-14 surface-mount | 8 | ||
| Common-mode input voltage range | VCM | -16 | 80 | V | TA = –40°C to 125°C | 6 | |
| Common-mode rejection ratio | CMRR | 80 | 100 | dB | VIN+ = –16 V to 80 V | 6 | |
| Common-mode rejection ratio over temperature | CMRR | 100 | 123 | dB | VIN+ = 12 V to 80 V, TA = –40°C to 125°C | 6 | |
| Offset voltage RTI | VOS | -2.5 | 0.5 | 2.5 | mV | TA = 25°C | 6 |
| Offset voltage RTI | VOS | -3 | 3 | mV | TA = 25°C to 125°C | 6 | |
| Offset voltage RTI | VOS | -3.5 | 3.5 | mV | TA = –40°C to 25°C | 6 | |
| Offset voltage RTI vs power supply (PSR) | 2.5 | 100 | µV/V | VOUT = 2 V, VIN+ = 18 V, 2.7 V, TA = –40°C to 125°C | 6 | ||
| Input bias current, VIN– pin | IB | -16 | 9 | 16 | µA | TA = –40°C to 125°C | 6 |
| Gain error | -1 | 0.2 | 1 | % | VSENSE = 20 mV to 100 mV | 6 | |
| Gain error over temperature | -2 | 2 | % | VSENSE = 20 mV to 100 mV, TA = –40°C to 125°C | 6 | ||
| Total output error | -2.2 | 0.75 | 2.2 | % | VSENSE = 120 mV, VS = 16 V | 6 | |
| Total output error over temperature | -3.5 | 3.5 | % | VSENSE = 120 mV, VS = 16 V, TA = –40°C to 125°C | 6 | ||
| Nonlinearity error | -0.002 | 0.002 | % | VSENSE = 20 mV to 100 mV | 6 | ||
| Maximum capacitive load | 10 | nF | No Sustained Oscillation | 6 | |||
| Output voltage (VSENSE < 20 mV), INA206 variant | 300 | mV | VSENSE < 20 mV, –16 V ≤ VCM < 0 V | 6 | |||
| Output voltage (VSENSE < 20 mV), INA206 variant | 0.4 | V | VSENSE < 20 mV, 0 V ≤ VCM ≤ VS | 6 | |||
| Comparator 1 offset voltage drift | -2 | 2 | µV/°C | TA = –40°C to 125°C | 7 | ||
| Comparator threshold | 590 | 608 | 620 | mV | TA = 25°C | 7 | |
| Comparator threshold over temperature | 586 | 625 | mV | TA = –40°C to 125°C | 7 | ||
| Comparator input bias current, CMP1 IN+ and CMP2 IN– | IB | 0.005 | 10 | nA | 7 | ||
| Comparator input range, CMP1 IN+ and CMP2 IN– | 0 | V | 7 | ||||
| Comparator input range, pins 3 and 6 (14-pin packages) | 0 | V | Pins 3 and 6 (14-pin packages only) | 7 | |||
| High-level output current | 0.0001 | 1 | µA | VID = 0.4 V, VOH = VS | 7 | ||
| Low-level output voltage | 220 | 300 | mV | VID = –0.6 V, IOL = 2.35 mA | 7 | ||
| Minimum RESET pulse width | 1.5 | µs | 7 | ||||
| Reference output voltage (1.2 V) | 1.2VREFOUT | 1.188 | 1.2 | 1.212 | V | 8 | |
| Reference drift (1.2 V) | dVOUT/dT | 40 | 100 | ppm/°C | TA = –40°C to 85°C | 8 | |
| Reference drift (0.6 VREF, pins 3 and 6 of 14-pin packages) | dVOUT/dT | 40 | 100 | ppm/°C | TA = –40°C to 85°C | 8 | |
| Load regulation, sourcing | dVOUT/dILOAD | 0.4 | 2 | mV/mA | 0 mA < ISOURCE < 0.5 mA | 8 | |
| Reference maximum capacitive load | 10 | nF | No Sustained Oscillations | 8 | |||
| Operating power supply | VS | 2.7 | 18 | V | TA = –40°C to 125°C | 8 | |
| Quiescent current | IQ | 1.8 | 2.2 | mA | VOUT = 2 V | 8 | |
| Quiescent current over temperature | IQ | 2.8 | mA | VSENSE = 0 mV, TA = –40°C to 125°C | 8 | ||
| Specified temperature range | -40 | 125 | °C | 8 |
CAD (KiCad official)
- Symbol:
INA206AIPWR - Footprint:
Package_SO:TSSOP-14_4.4x5mm_P0.65mm - 3D model: TSSOP-14 (KiCad packages3D, STEP)
- 3D model files:
ina206aipwr-etched.step/ina206aipwr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ina206aipwr.step/ina206aipwr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (42 pp, sha256
5ef2c4404a53eb9f, retrieved 2026-10-06, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).