component
TLV5610IPWR
Public Made by Adomby adom
Texas Instruments Digital To Analog Converters (DAC), TSSOP-20. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownTLV5610IPWR
Texas Instruments · Digital To Analog Converters (DAC) · TSSOP-20
TLV5610IPWR from Texas Instruments, in a TSSOP-20. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | DGND | power_in | Digital ground. |
| 2 | DIN | input | Digital serial data input, sampled on falling SCLK edges with a 16-bit word (4 address/control bits plus 12 data bits), MSB first. |
| 3 | SCLK | input | Serial clock input, maximum 30 MHz. |
| 4 | FS | input | Frame sync input whose falling edge starts shifting data on DIN; in uC mode it must stay low until all 16 bits are transferred. |
| 5 | PRE | input | Asynchronous preset input; driving it low with LDAC asserted drives all DAC outputs to the value in the preset register. |
| 6 | OUTE | output | DAC E analog voltage output, rail-to-rail buffered with gain of two, able to drive a 2 kOhm load with 100 pF. |
| 7 | OUTF | output | DAC F analog voltage output, rail-to-rail buffered with gain of two, able to drive a 2 kOhm load with 100 pF. |
| 8 | OUTG | output | DAC G analog voltage output, rail-to-rail buffered with gain of two, able to drive a 2 kOhm load with 100 pF. |
| 9 | OUTH | output | DAC H analog voltage output, rail-to-rail buffered with gain of two, able to drive a 2 kOhm load with 100 pF. |
| 10 | AGND | power_in | Analog ground. |
| 11 | AVDD | power_in | Analog power supply, 2.7 V to 5.5 V (7 V absolute maximum); must come up before DVDD when supplies are separate. |
| 12 | OUTA | output | DAC A analog voltage output, rail-to-rail buffered with gain of two, able to drive a 2 kOhm load with 100 pF. |
| 13 | OUTB | output | DAC B analog voltage output, rail-to-rail buffered with gain of two, able to drive a 2 kOhm load with 100 pF. |
| 14 | OUTC | output | DAC C analog voltage output, rail-to-rail buffered with gain of two, able to drive a 2 kOhm load with 100 pF. |
| 15 | OUTD | output | DAC D analog voltage output, rail-to-rail buffered with gain of two, able to drive a 2 kOhm load with 100 pF. |
| 16 | REF | input | Buffered high-impedance voltage reference input (100 kOhm, 5 pF) ranging from 0 V to AVDD, which may be tied to the supply. |
| 17 | MODE | input | DSP/uC mode pin: high selects uC mode, no connect or low selects DSP mode. |
| 18 | LDAC | input | Asynchronous load DAC input; DAC outputs are updated only while this signal is low. |
| 19 | DOUT | output | Digital serial data output for daisy-chaining, giving DIN data delayed by 16 clock cycles when enabled via the DO bit. |
| 20 | DVDD | power_in | Digital power supply, 2.7 V to 5.5 V (7 V absolute maximum). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TSSOP-20 |
| Category | Data Acquisition |
| Pins | 20 |
CAD (KiCad official)
- Symbol:
TLV5610IPWR - Footprint:
Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm - 3D model: TSSOP-20 (KiCad packages3D, STEP)
- 3D model files:
tlv5610ipwr-etched.step/tlv5610ipwr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tlv5610ipwr.step/tlv5610ipwr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (25 pp, sha256
5201b308030f0178, retrieved 2026-10-03, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).