3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownIS25LP032D-JNLA3-TR
ISSI(Integrated Silicon Solution) · NOR FLASH · SOIC-8
IS25LP032D-JNLA3-TR from ISSI(Integrated Silicon Solution), in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CE# | input | Chip Enable: driving CE# high deselects the device and puts the outputs in high impedance, and after power-up CE# must transition from high to low before a new instruction is accepted. |
| 2 | SO (IO1) | bidirectional | Serial Data Output: in standard SPI it reads data or status on the falling edge of SCK, and in Dual/Quad SPI and QPI modes it is the bidirectional IO1. |
| 3 | WP# (IO2) | bidirectional | Write Protect: with SRWD set to 1 and WP# pulled low, the Status Register bits (SRWD, QE, BP3-BP0) are write-protected; when QE is set to 1 this pin is used as IO2 and WP# is unavailable. |
| 4 | GND | power_in | Ground: connect to ground when referenced to Vcc. |
| 5 | SI (IO0) | bidirectional | Serial Data Input: in standard SPI it writes instructions, addresses or data on the rising edge of SCK, and in Dual/Quad SPI and QPI modes it is the bidirectional IO0. |
| 6 | SCK | input | Serial Data Clock: synchronized clock for input and output timing operations. |
| 7 | HOLD# or RESET# (IO3) | bidirectional | HOLD# (default, P7=0) pauses serial communication while low with CE# low and SO goes high impedance; RESET# is selected when P7=1, and the pin becomes IO3 when QE is set to 1. |
| 8 | Vcc | power_in | Power: device core power supply; the IS25LP series operates from 2.30V to 3.60V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | ISSI(Integrated Silicon Solution) |
| Package | SOIC-8 |
| Category | Memory |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
IS25LP032D-JNLA3-TR - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
is25lp032d-jnla3-tr-etched.step/is25lp032d-jnla3-tr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);is25lp032d-jnla3-tr.step/is25lp032d-jnla3-tr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: ISSI(Integrated Silicon Solution) datasheet (119 pp, sha256
53ef94f9f600a605, retrieved 2026-11-02, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).