main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers is25lp032d-jnla3-tr: symbol viewer · Ray
is25lp032d-jnla3-tr-etched.glb Publish 0.1.0 · Ray
is25lp032d-jnla3-tr-etched.step is25lp032d-jnla3-tr: factory component page (tier=lcsc) · Ray
is25lp032d-jnla3-tr-hero.glb is25lp032d-jnla3-tr: hero GLB from the etched model (keeps the MPN mark) · Ray
is25lp032d-jnla3-tr-hero.overlay.json Publish 0.1.0 · Ray
is25lp032d-jnla3-tr.glb Publish 0.1.0 · Ray
is25lp032d-jnla3-tr.kicad_mod Publish 0.1.0 · Ray
is25lp032d-jnla3-tr.kicad_sym is25lp032d-jnla3-tr: symbol repaired (body fitted to the names) · Ray
is25lp032d-jnla3-tr.lbr is25lp032d-jnla3-tr: symbol repaired (body fitted to the names) · Ray
is25lp032d-jnla3-tr.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier lcsc, 8 pins · Ray

IS25LP032D-JNLA3-TR

ISSI(Integrated Silicon Solution) · NOR FLASH · SOIC-8

IS25LP032D-JNLA3-TR from ISSI(Integrated Silicon Solution), in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 CE# input Chip Enable: driving CE# high deselects the device and puts the outputs in high impedance, and after power-up CE# must transition from high to low before a new instruction is accepted.
2 SO (IO1) bidirectional Serial Data Output: in standard SPI it reads data or status on the falling edge of SCK, and in Dual/Quad SPI and QPI modes it is the bidirectional IO1.
3 WP# (IO2) bidirectional Write Protect: with SRWD set to 1 and WP# pulled low, the Status Register bits (SRWD, QE, BP3-BP0) are write-protected; when QE is set to 1 this pin is used as IO2 and WP# is unavailable.
4 GND power_in Ground: connect to ground when referenced to Vcc.
5 SI (IO0) bidirectional Serial Data Input: in standard SPI it writes instructions, addresses or data on the rising edge of SCK, and in Dual/Quad SPI and QPI modes it is the bidirectional IO0.
6 SCK input Serial Data Clock: synchronized clock for input and output timing operations.
7 HOLD# or RESET# (IO3) bidirectional HOLD# (default, P7=0) pauses serial communication while low with CE# low and SO goes high impedance; RESET# is selected when P7=1, and the pin becomes IO3 when QE is set to 1.
8 Vcc power_in Power: device core power supply; the IS25LP series operates from 2.30V to 3.60V.

Key specifications

Parameter Value
Manufacturer ISSI(Integrated Silicon Solution)
Package SOIC-8
Category Memory
Pins 8

CAD (KiCad official)

  • Symbol: IS25LP032D-JNLA3-TR
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: is25lp032d-jnla3-tr-etched.step / is25lp032d-jnla3-tr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); is25lp032d-jnla3-tr.step / is25lp032d-jnla3-tr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: ISSI(Integrated Silicon Solution) datasheet (119 pp, sha256 53ef94f9f600a605, retrieved 2026-11-02, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF