3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownLT3575EFE#TRPBF
Analog Devices · DC-DC Converters · TSSOP-16-EP
LT3575EFE#TRPBF from Analog Devices, in a TSSOP-16-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | No connect pin that can be left open or connected to any ground plane. |
| 2 | VIN | power_in | Input voltage pin (3V to 40V) supplying the internal start-up circuitry and serving as reference for the DCM comparator and feedback circuitry; must be locally bypassed with a capacitor. |
| 3 | SW | passive | Collector node of the 2.5A, 60V NPN output switch carrying large currents, so traces to switching components should be kept short. |
| 4 | SW | passive | Collector node of the 2.5A, 60V NPN output switch carrying large currents, so traces to switching components should be kept short. |
| 5 | BIAS | power_in | Bias voltage pin supplying the switch driver and internal circuitry, must be locally bypassed, and may be tied to VIN if no third winding is used and VIN ≤ 15V. |
| 6 | SHDN/UVLO | input | Shutdown/undervoltage lockout pin programmed by a resistor divider from VIN, with 1.22V rising threshold and 2.8μA hysteresis current, drawing no quiescent current below ~0.7V. |
| 7 | SS | passive | Soft-start pin where a capacitor limits start-up inrush current and output ramp rate, with switching starting at ~0.7V. |
| 8 | RILIM | passive | Maximum current limit adjust pin; a resistor to ground sets the current limit, with 10k giving the full switch current capability. |
| 9 | VC | passive | Compensation pin for the internal error amplifier; connect a series RC to ground, with an optional 100pF in parallel to reduce noise. |
| 10 | RFB | input | Input for the external feedback resistor connected to the transformer primary (VSW), with about 200μA average current during flyback, or connected to VIN in nonisolated applications. |
| 11 | RREF | passive | Input for the external ground-referred reference resistor, in the range of about 6k, which sets the output voltage with RFB. |
| 12 | TC | passive | Output voltage temperature compensation pin; a resistor to ground produces a PTAT current sourced into the RREF node, ITC = 0.55V/RTC. |
| 13 | TEST | input | Test pin used for testing purposes only that must be connected to ground for the part to operate properly. |
| 14 | GND | power_in | Ground pin, which should be connected to the ground plane along with the exposed pad. |
| 15 | NC | unconnected | No connect pin that can be left open or connected to any ground plane. |
| 16 | NC | unconnected | No connect pin that can be left open or connected to any ground plane. |
| 17 | GND | power_in | Exposed pad providing electrical and thermal contact to ground; must be soldered to the board and connected with many vias to an internal ground plane. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | TSSOP-16-EP |
| Category | Power Supply Chip |
| Pins | 17 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Voltage Range | VIN | 3 | 40 | V | full operating temperature range | 2 | |
| SHDN/UVLO Pin Threshold | 1.15 | 1.22 | 1.32 | V | UVLO Pin Voltage Rising | 2 | |
| SHDN/UVLO Pin Hysteresis Current | 2.2 | 2.8 | 3.2 | µA | VUVLO = 1V | 2 | |
| Switch Current Limit | 2.8 | 3.5 | 4.2 | A | RILIM = 10k | 2 | |
| RREF Voltage | 1.21 | 1.23 | 1.25 | V | VIN = 3V | 2 | |
| RREF Voltage (full temperature range) | 1.2 | 1.26 | V | over full operating temperature range | 2 | ||
| RREF Voltage Line Regulation | 0.01 | 0.03 | %/V | 3V < VIN < 40V | 2 | ||
| RREF Pin Bias Current | 100 | 600 | nA | Note 3 | 2 | ||
| BIAS Pin Voltage | 2.9 | 3 | 3.1 | V | IBIAS = 30mA | 3 | |
| Switch VCESAT | VCESAT | 75 | 125 | mV | ISW = 0.5A | 2 | |
| Quiescent Current | IQ | 4.5 | mA | SS = 0V | 2 | ||
| Soft-Start Current | 7 | µA | SS = 0.4V | 2 | |||
| Soft-Start Threshold | 0.7 | V | 2 | ||||
| Maximum Switching Frequency | 1000 | kHz | 2 | ||||
| Minimum Current Limit | 400 | mA | VC = 0V | 2 | |||
| IREF Reference Current | IREF | 190 | µA | Measured at RFB Pin with RREF = 6.49k | 3 | ||
| Error Amplifier Voltage Gain | 150 | V/V | VIN = 3V | 3 | |||
| Error Amplifier Transconductance | 150 | µmhos | ΔI = 10µA, VIN = 3V | 3 | |||
| Minimum Switching Frequency | 40 | kHz | VC = 0.35V | 3 | |||
| TC Current into RREF | 27.5 | µA | RTC = 20.1k | 3 | |||
| VIN, SHDN/UVLO, RFB, BIAS Voltage | 40 | V | 2 | ||||
| SS, VC, TC, RREF, RILIM Voltage | 5 | V | 2 | ||||
| Maximum Junction Temperature | TJMAX | 125 | °C | 2 | |||
| Operating Junction Temperature Range | TJ | -40 | 125 | °C | LT3575E | 2 | |
| Storage Temperature Range | TSTG | -65 | 150 | °C | 2 | ||
| Thermal Resistance Junction-to-Ambient | θJA | 38 | °C/W | FE package | 2 | ||
| Thermal Resistance Junction-to-Case | θJC | 10 | °C/W | FE package | 2 |
CAD (KiCad official)
- Symbol:
LT3575EFE#TRPBF - Footprint:
Package_SO:TSSOP-16-1EP_4.4x5mm_P0.65mm - 3D model: TSSOP-16-EP (KiCad packages3D, STEP)
- 3D model files:
lt3575efe-trpbf-etched.step/lt3575efe-trpbf-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lt3575efe-trpbf.step/lt3575efe-trpbf.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (24 pp, sha256
c581bbfcd62594dd, retrieved 2026-10-31, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).