Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

SN65LVDS105DR

Texas Instruments · Signal Buffers, Repeaters, Splitters · SOIC-16

SN65LVDS105DR from Texas Instruments, in a SOIC-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 EN1 input Enable input for channel 1 (LVTTL, 5-V tolerant, absolute max 6 V).
2 EN2 input Enable input for channel 2 (LVTTL, 5-V tolerant, absolute max 6 V).
3 EN3 input Enable input for channel 3 (LVTTL, 5-V tolerant, absolute max 6 V).
4 VCC power_in Supply voltage, 3 V to 3.6 V recommended (3.3 V nominal).
5 GND power_in Ground.
6 A input LVTTL input for the SN65LVDS105 (5-V tolerant, absolute max 6 V; VIH min 2 V, VIL max 0.8 V).
7 NC unconnected No connect on the SN65LVDS105.
8 EN4 input Enable input for channel 4 (LVTTL, 5-V tolerant, absolute max 6 V).
9 4Z output LVDS output, negative, channel 4.
10 4Y output LVDS output, positive, channel 4.
11 3Z output LVDS output, negative, channel 3.
12 3Y output LVDS output, positive, channel 3.
13 2Z output LVDS output, negative, channel 2.
14 2Y output LVDS output, positive, channel 2.
15 1Z output LVDS output, negative, channel 1.
16 1Y output LVDS output, positive, channel 1.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOIC-16
Category Communication Interface Chip/UART/485/232
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Differential output voltage magnitude /VOD/ 247 340 454 mV RL = 100 Ω, VID = ±100 mV, See Figure 18 and Figure 19 6
Change in differential output voltage magnitude between logic states Δ/VOD/ -50 50 mV RL = 100 Ω, VID = ±100 mV, See Figure 18 and Figure 19 6
Change in steady-state common-mode output voltage between logic states ΔVOC(SS) -50 50 mV See Figure 20 6
Peak-to-peak common-mode output voltage VOC(PP) 25 150 mV See Figure 20 6
Supply current, enabled ICC 23 35 mA Enabled, RL = 100 Ω 6
Supply current, disabled ICC 0.7 6.4 mA Disabled 6
High-level input current IIH 20 µA VIH = 2 V 6
Low-level input current IIL 10 µA VIL = 0.8 V 6
Short-circuit output current IOS -10 10 mA VOY or VOZ = 0 V 6
High-impedance output current IOZ -1 1 µA VO = 0 V or 2.4 V 6
Power-off output current IO(OFF) -1 0.3 1 µA VCC = 1.5 V, VO = 2.4 V 6
Propagation delay time, low-to-high-level output tPLH 1.7 2.2 3 ns RL = 100 Ω, CL = 10 pF, See Figure 21 7
Propagation delay time, high-to-low-level output tPHL 1.4 2.3 3.5 ns RL = 100 Ω, CL = 10 pF, See Figure 21 7
Differential output signal rise time tr 0.3 0.8 1.2 ns RL = 100 Ω, CL = 10 pF, See Figure 21 7
Differential output signal fall time tf 0.3 0.8 1.2 ns RL = 100 Ω, CL = 10 pF, See Figure 21 7
Pulse skew tsk(p) 150 500 ps RL = 100 Ω, CL = 10 pF, See Figure 21 7
Channel-to-channel output skew tsk(o) 20 100 ps RL = 100 Ω, CL = 10 pF, See Figure 21 7
Part-to-part skew tsk(pp) 1.5 ns 7
Propagation delay, high-impedance-to-high-level tPZH 7.2 15 ns See Figure 22 7
Propagation delay, high-impedance-to-low-level tPZL 8.4 15 ns See Figure 22 7
Propagation delay, high-level-to-high-impedance tPHZ 3.6 15 ns See Figure 22 7
Propagation delay, low-level-to-high-impedance tPLZ 6 15 ns See Figure 22 7
Supply voltage VCC 3 3.3 3.6 V 4
High-level input voltage VIH 2 V 4
Low-level input voltage VIL 0.8 V 4
Operating free-air temperature TA -40 85 °C 4
Supply voltage VCC -0.5 4 V 4
Voltage at enables, A (SN65LVDS105) -0.5 6 V 4
Voltage at A, B, Y or Z -0.5 4 V 4
Lead temperature 260 °C 1.6 mm (1/16 inch) from case for 10 seconds 4
Storage temperature Tstg -65 150 °C 4
ESD HBM V(ESD) -12000 12000 V Human body model, JS-001 4
ESD CDM V(ESD) -1500 1500 V Charged-device model, JESD22-C101 4
Junction-to-ambient thermal resistance RθJA 74.4 °C/W D (SOIC) 16 pins 4
Junction-to-case (top) thermal resistance RθJC(top) 35.1 °C/W D (SOIC) 16 pins 4
Junction-to-board thermal resistance RθJB 32 °C/W D (SOIC) 16 pins 4
Junction-to-top characterization parameter ψJT 6 °C/W D (SOIC) 16 pins 4
Junction-to-board characterization parameter ψJB 31.7 °C/W D (SOIC) 16 pins 4
Input capacitance CIN 5 pF VI = 0.4 sin (4E6πt) + 0.5 V 6
Output capacitance (Y or Z outputs) CO 9.4 pF VI = 0.4 sin (4E6πt) + 0.5 V, Disabled 6
Power rating, D package 950 mW TA ≤ 25°C 7

CAD (KiCad official)

  • Symbol: SN65LVDS105DR
  • Footprint: Package_SO:SOIC-16_3.9x9.9mm_P1.27mm
  • 3D model: SOIC-16 (KiCad packages3D, STEP)
  • 3D model files: sn65lvds105dr-etched.step / sn65lvds105dr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); sn65lvds105dr.step / sn65lvds105dr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (42 pp, sha256 4f692df78fe69a72, retrieved 2026-11-02, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-opus-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF