Generated by kicad-footprint-generator · KiCad file format 20260206
SN65LVDS105DR
Texas Instruments · Signal Buffers, Repeaters, Splitters · SOIC-16
SN65LVDS105DR from Texas Instruments, in a SOIC-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | EN1 | input | Enable input for channel 1 (LVTTL, 5-V tolerant, absolute max 6 V). |
| 2 | EN2 | input | Enable input for channel 2 (LVTTL, 5-V tolerant, absolute max 6 V). |
| 3 | EN3 | input | Enable input for channel 3 (LVTTL, 5-V tolerant, absolute max 6 V). |
| 4 | VCC | power_in | Supply voltage, 3 V to 3.6 V recommended (3.3 V nominal). |
| 5 | GND | power_in | Ground. |
| 6 | A | input | LVTTL input for the SN65LVDS105 (5-V tolerant, absolute max 6 V; VIH min 2 V, VIL max 0.8 V). |
| 7 | NC | unconnected | No connect on the SN65LVDS105. |
| 8 | EN4 | input | Enable input for channel 4 (LVTTL, 5-V tolerant, absolute max 6 V). |
| 9 | 4Z | output | LVDS output, negative, channel 4. |
| 10 | 4Y | output | LVDS output, positive, channel 4. |
| 11 | 3Z | output | LVDS output, negative, channel 3. |
| 12 | 3Y | output | LVDS output, positive, channel 3. |
| 13 | 2Z | output | LVDS output, negative, channel 2. |
| 14 | 2Y | output | LVDS output, positive, channel 2. |
| 15 | 1Z | output | LVDS output, negative, channel 1. |
| 16 | 1Y | output | LVDS output, positive, channel 1. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-16 |
| Category | Communication Interface Chip/UART/485/232 |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Differential output voltage magnitude | /VOD/ | 247 | 340 | 454 | mV | RL = 100 Ω, VID = ±100 mV, See Figure 18 and Figure 19 | 6 |
| Change in differential output voltage magnitude between logic states | Δ/VOD/ | -50 | 50 | mV | RL = 100 Ω, VID = ±100 mV, See Figure 18 and Figure 19 | 6 | |
| Change in steady-state common-mode output voltage between logic states | ΔVOC(SS) | -50 | 50 | mV | See Figure 20 | 6 | |
| Peak-to-peak common-mode output voltage | VOC(PP) | 25 | 150 | mV | See Figure 20 | 6 | |
| Supply current, enabled | ICC | 23 | 35 | mA | Enabled, RL = 100 Ω | 6 | |
| Supply current, disabled | ICC | 0.7 | 6.4 | mA | Disabled | 6 | |
| High-level input current | IIH | 20 | µA | VIH = 2 V | 6 | ||
| Low-level input current | IIL | 10 | µA | VIL = 0.8 V | 6 | ||
| Short-circuit output current | IOS | -10 | 10 | mA | VOY or VOZ = 0 V | 6 | |
| High-impedance output current | IOZ | -1 | 1 | µA | VO = 0 V or 2.4 V | 6 | |
| Power-off output current | IO(OFF) | -1 | 0.3 | 1 | µA | VCC = 1.5 V, VO = 2.4 V | 6 |
| Propagation delay time, low-to-high-level output | tPLH | 1.7 | 2.2 | 3 | ns | RL = 100 Ω, CL = 10 pF, See Figure 21 | 7 |
| Propagation delay time, high-to-low-level output | tPHL | 1.4 | 2.3 | 3.5 | ns | RL = 100 Ω, CL = 10 pF, See Figure 21 | 7 |
| Differential output signal rise time | tr | 0.3 | 0.8 | 1.2 | ns | RL = 100 Ω, CL = 10 pF, See Figure 21 | 7 |
| Differential output signal fall time | tf | 0.3 | 0.8 | 1.2 | ns | RL = 100 Ω, CL = 10 pF, See Figure 21 | 7 |
| Pulse skew | tsk(p) | 150 | 500 | ps | RL = 100 Ω, CL = 10 pF, See Figure 21 | 7 | |
| Channel-to-channel output skew | tsk(o) | 20 | 100 | ps | RL = 100 Ω, CL = 10 pF, See Figure 21 | 7 | |
| Part-to-part skew | tsk(pp) | 1.5 | ns | 7 | |||
| Propagation delay, high-impedance-to-high-level | tPZH | 7.2 | 15 | ns | See Figure 22 | 7 | |
| Propagation delay, high-impedance-to-low-level | tPZL | 8.4 | 15 | ns | See Figure 22 | 7 | |
| Propagation delay, high-level-to-high-impedance | tPHZ | 3.6 | 15 | ns | See Figure 22 | 7 | |
| Propagation delay, low-level-to-high-impedance | tPLZ | 6 | 15 | ns | See Figure 22 | 7 | |
| Supply voltage | VCC | 3 | 3.3 | 3.6 | V | 4 | |
| High-level input voltage | VIH | 2 | V | 4 | |||
| Low-level input voltage | VIL | 0.8 | V | 4 | |||
| Operating free-air temperature | TA | -40 | 85 | °C | 4 | ||
| Supply voltage | VCC | -0.5 | 4 | V | 4 | ||
| Voltage at enables, A (SN65LVDS105) | -0.5 | 6 | V | 4 | |||
| Voltage at A, B, Y or Z | -0.5 | 4 | V | 4 | |||
| Lead temperature | 260 | °C | 1.6 mm (1/16 inch) from case for 10 seconds | 4 | |||
| Storage temperature | Tstg | -65 | 150 | °C | 4 | ||
| ESD HBM | V(ESD) | -12000 | 12000 | V | Human body model, JS-001 | 4 | |
| ESD CDM | V(ESD) | -1500 | 1500 | V | Charged-device model, JESD22-C101 | 4 | |
| Junction-to-ambient thermal resistance | RθJA | 74.4 | °C/W | D (SOIC) 16 pins | 4 | ||
| Junction-to-case (top) thermal resistance | RθJC(top) | 35.1 | °C/W | D (SOIC) 16 pins | 4 | ||
| Junction-to-board thermal resistance | RθJB | 32 | °C/W | D (SOIC) 16 pins | 4 | ||
| Junction-to-top characterization parameter | ψJT | 6 | °C/W | D (SOIC) 16 pins | 4 | ||
| Junction-to-board characterization parameter | ψJB | 31.7 | °C/W | D (SOIC) 16 pins | 4 | ||
| Input capacitance | CIN | 5 | pF | VI = 0.4 sin (4E6πt) + 0.5 V | 6 | ||
| Output capacitance (Y or Z outputs) | CO | 9.4 | pF | VI = 0.4 sin (4E6πt) + 0.5 V, Disabled | 6 | ||
| Power rating, D package | 950 | mW | TA ≤ 25°C | 7 |
CAD (KiCad official)
- Symbol:
SN65LVDS105DR - Footprint:
Package_SO:SOIC-16_3.9x9.9mm_P1.27mm - 3D model: SOIC-16 (KiCad packages3D, STEP)
- 3D model files:
sn65lvds105dr-etched.step/sn65lvds105dr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sn65lvds105dr.step/sn65lvds105dr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (42 pp, sha256
4f692df78fe69a72, retrieved 2026-11-02, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).