component
S-LBC856BDW1T1G
Public Made by Adomby adom
LRC Bipolar (BJT), SOT-363. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownS-LBC856BDW1T1G
LRC · Bipolar (BJT) · SOT-363
S-LBC856BDW1T1G from LRC, in a SOT-363. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | E2 | passive | Emitter of PNP transistor Q2 (schematic top right); Q2 is rated VCEO -65 V, IC -100 mA continuous. |
| 2 | B2 | passive | Base of PNP transistor Q2; Q2 is rated VEBO -5 V. |
| 3 | C1 | passive | Collector of PNP transistor Q1 (schematic top left); rated VCEO -65 V, VCBO -80 V, IC -100 mA continuous. |
| 4 | E1 | passive | Emitter of PNP transistor Q1 (schematic bottom left); Q1 is rated VEBO -5 V. |
| 5 | B1 | passive | Base of PNP transistor Q1; Q1 is rated VEBO -5 V. |
| 6 | C2 | passive | Collector of PNP transistor Q2 (schematic bottom right); rated VCEO -65 V, VCBO -80 V, IC -100 mA continuous. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | LRC |
| Package | SOT-363 |
| Category | Transistors/Thyristors |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Collector-Base Voltage | VCBO | -80 | V | Ta = 25°C | 1 | ||
| Collector-Emitter Voltage | VCEO | -65 | V | Ta = 25°C | 1 | ||
| Emitter-Base Voltage | VEBO | -5 | V | Ta = 25°C | 1 | ||
| Collector Current (Continuous) | IC | -100 | mA | Ta = 25°C | 1 | ||
| Junction and Storage Temperature | TJ,Tstg | -55 | 150 | ºC | 1 | ||
| Total Device Dissipation | PD | 250 | mW | FR-4 board (Note 1) | 1 | ||
| Thermal Resistance, Junction to Ambient | RθJA | 500 | ºC/W | FR-4 board (Note 1) | 1 | ||
| Collector-Emitter Breakdown Voltage | V(BR)CES | -80 | V | IC = -10 µA, VEB = 0 | 2 | ||
| Collector-Emitter Breakdown Voltage | V(BR)CEO | -65 | V | IC = -10 mA | 2 | ||
| Collector-Base Breakdown Voltage | V(BR)CBO | -80 | V | IC = -10 µA | 2 | ||
| Emitter-Base Breakdown Voltage | V(BR)EBO | -5 | V | IE = -1.0 µA | 2 | ||
| Collector Cutoff Current | ICBO | -15 | µA | VCB = -30 V | 2 | ||
| Collector Cutoff Current | ICBO | -4 | nA | VCB = -30 V, TA = 150°C | 2 | ||
| DC Current Gain | hFE | 220 | 290 | 475 | IC = -2.0 mA, VCE = -5.0 V | 2 | |
| Collector-Emitter Saturation Voltage | VCE(sat) | -0.3 | V | IC = -10 mA, IB = -0.5 mA | 2 | ||
| Collector-Emitter Saturation Voltage | VCE(sat) | -0.65 | V | IC = -100 mA, IB = -5.0 mA | 2 | ||
| Base-Emitter Voltage (on) | VBE(on) | -0.6 | -0.75 | V | IC = -2.0 mA, VCE = -5.0 V | 2 | |
| Base-Emitter Voltage (on) | VBE(on) | -0.82 | V | IC = -10 mA, VCE = -5.0 V | 2 | ||
| Current-Gain, Bandwidth Product | fT | 100 | MHz | IC = -10 mA, VCE = -5.0 V, f = 100 MHz | 2 | ||
| Output Capacitance | Cobo | 4.5 | pF | VCB = -10 V, f = 1.0 MHz | 2 | ||
| Noise Figure | NF | 10 | dB | IC = -0.2 mA, VCE = -5.0 V, RS = 2.0 kΩ, f = 1.0 kHz, BW = 200 Hz | 2 | ||
| Base-Emitter Saturation Voltage | VBE(sat) | -0.7 | V | IC = -10 mA, IB = -0.5 mA | 2 | ||
| Base-Emitter Saturation Voltage | VBE(sat) | -0.9 | V | IC = -100 mA, IB = -5.0 mA | 2 | ||
| Power Dissipation Derating | PD | 2 | mW/ºC | Derate above 25°C | 1 |
CAD (KiCad official)
- Symbol:
S-LBC856BDW1T1G - Footprint:
Package_TO_SOT_SMD:SOT-363_SC-70-6 - 3D model: SOT-363 (KiCad packages3D, STEP)
- 3D model files:
s-lbc856bdw1t1g-etched.step/s-lbc856bdw1t1g-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);s-lbc856bdw1t1g.step/s-lbc856bdw1t1g.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: LRC datasheet (6 pp, sha256
e07e5baab3435436, retrieved 2026-10-17, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).