Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

IS25WP256D-JLLE

ISSI(Integrated Silicon Solution) · NOR FLASH · WSON-8-EP(6x8)

IS25WP256D-JLLE from ISSI(Integrated Silicon Solution), in a WSON-8-EP(6x8). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 CE# input Chip Enable: when high the device is deselected with outputs high-impedance and in standby, and when low the device is selected and accepts instructions.
2 SO (IO1) bidirectional Serial Data Output in standard SPI (read data on the falling edge of SCK), and bidirectional IO1 in Dual and Quad SPI and QPI modes.
3 WP# (IO2) bidirectional Write Protect that protects the Status Register (SRWD, QE, BP3-BP0) when SRWD=1 and WP# is low, and becomes IO2 when QE=1 in Quad SPI and QPI modes.
4 GND power_in Ground reference for Vcc.
5 SI (IO0) bidirectional Serial Data Input in standard SPI (latched on the rising edge of SCK), and bidirectional IO0 in Dual and Quad SPI and QPI modes.
6 SCK input Serial Data Clock that synchronizes input and output timing.
7 HOLD# or RESET# (IO3) bidirectional HOLD# (P7=0, default) pauses serial communication while selected, or RESET# hardware reset (P7=1), selected by the P7 bit of the Read Register when QE=0; becomes IO3 when QE=1.
8 Vcc power_in Device core power supply; IS25WP256D range is 1.65V to 1.95V.
9 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer ISSI(Integrated Silicon Solution)
Package WSON-8-EP(6x8)
Category Memory
Pins 9

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage range (IS25WP) VCC 1.65 1.8 1.95 V IS25WP, max 104MHz 159
Operating temperature, Extended grade E -40 105 °C Extended Grade E 159
VCC supply voltage absolute maximum (IS25WP) VCC -0.5 2.5 V IS25WP 159
Input voltage on all pins -0.5 0.5 V -0.5V to VCC + 0.5V (max is VCC + 0.5V) 159
Output voltage on all outputs -0.5 0.5 V -0.5V to VCC + 0.5V (max is VCC + 0.5V) 159
Storage temperature -65 150 °C 159
Lead soldering temperature, lead-free package 260 °C 3 seconds 159
Active read current NORD 80MHz ICC1 7.5 9 mA NORD at 80MHz 160
Active read current FRD Quad 104MHz ICC1 10 12 mA FRD Quad at 104MHz 160
Active read current FRD Quad 83MHz ICC1 9 11 mA FRD Quad at 83MHz 160
Active read current FRD Single DTR 80MHz ICC1 9 11 mA FRD Single DTR at 80MHz 160
Active read current FRD Dual DTR 80MHz ICC1 10 12 mA FRD Dual DTR at 80MHz 160
Active read current FRD Quad DTR 80MHz ICC1 11 13 mA FRD Quad DTR at 80MHz 160
Program current ICC2 25 30 mA CE# = VCC, 85°C (30 max also at 105°C) 160
WRSR current ICC3 25 30 mA CE# = VCC, 85°C (30 max also at 105°C) 160
Erase current (sector/block) ICC4 25 30 mA CE# = VCC, 85°C (30 max also at 105°C) 160
Erase current (chip) ICC5 25 30 mA CE# = VCC, 85°C (30 max also at 105°C) 160
Standby current CMOS IS25WP, 85°C ISB1 6 60 µA CE# = VCC, 85°C 160
Standby current CMOS IS25WP, 105°C ISB1 90 µA CE# = VCC, 105°C 160
Deep power down current IS25WP, 85°C ISB2 1 20 µA CE# = VCC, 85°C 160
Deep power down current IS25WP, 105°C ISB2 30 µA CE# = VCC, 105°C 160
Input leakage current ILI -1 1 µA VIN = 0V to VCC 160
Output leakage current ILO -1 1 µA VIN = 0V to VCC 160
Input low voltage VIL -0.5 0.3 V max is 0.3VCC 160
Input high voltage VIH 0.7 0.3 V min 0.7VCC, max VCC + 0.3 160
Output low voltage VOL 0.2 V IOL = 100 µA 160
Output high voltage VOH 0.2 V IOH = -100 µA; min is VCC - 0.2 160
Input capacitance (CE#, SCK) CIN 6 pF VIN = 0V, TA=25°C, VCC=1.8V, 1MHz 161
Input/output capacitance (other pins) CIN/OUT 10 pF VIN/OUT = 0V, TA=25°C, VCC=1.8V, 1MHz 161
Clock frequency fast read fCT 0 104 MHz Vcc=1.65V~1.95V 162
Clock frequency fast read DTR fC2, fT2, fQ2 0 80 MHz 162
Clock frequency read mode fC 0 80 MHz 162
CE# high time tCEH 7 ns 162
CE# setup time tCS 5 ns IS25WP 162
CE# hold time tCH 3 ns 162
Data in setup time, normal mode tDS 2 ns Normal Mode 162
Data in hold time, normal mode tDH 2 ns Normal Mode 162
Output valid tV 8 ns @ 104MHz (CL = 30pF) 162
Output hold time tOH 2 ns 162
Output disable time tDIS 8 ns 162
Sector erase time (4Kbyte) tEC 100 300 ms 162
Chip erase time tEC 70 180 s 162
Page program time tPP 0.2 0.8 ms 162
Release deep power down tRES1 5 µs IS25WP 163
Write status register time tW 2 15 ms 163
Write inhibit voltage VWI 1.4 V IS25WP 166
Vcc(min) to CE# low tVCE 1 ms 166
Power-up time delay to write instruction tPUW 1 10 ms 166
Endurance 100000 Cycles JEDEC Standard A117 167
Data retention 20 Years JEDEC Standard A103 167

CAD (KiCad official)

  • Symbol: IS25WP256D-JLLE
  • Footprint: Package_SON:WSON-8-1EP_8x6mm_P1.27mm_EP3.4x4.3mm
  • 3D model: WSON-8-EP(6x8), generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 0.75 mm nominal WSON height). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions are nominal, not the manufacturer's CAD (STEP)
  • 3D model files: is25wp256d-jlle-etched.step / is25wp256d-jlle-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); is25wp256d-jlle.step / is25wp256d-jlle.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: ISSI(Integrated Silicon Solution) datasheet (173 pp, sha256 c7fc8c433c26a257, retrieved 2026-10-23, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF