3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownIS25WP256D-JLLE
ISSI(Integrated Silicon Solution) · NOR FLASH · WSON-8-EP(6x8)
IS25WP256D-JLLE from ISSI(Integrated Silicon Solution), in a WSON-8-EP(6x8). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CE# | input | Chip Enable: when high the device is deselected with outputs high-impedance and in standby, and when low the device is selected and accepts instructions. |
| 2 | SO (IO1) | bidirectional | Serial Data Output in standard SPI (read data on the falling edge of SCK), and bidirectional IO1 in Dual and Quad SPI and QPI modes. |
| 3 | WP# (IO2) | bidirectional | Write Protect that protects the Status Register (SRWD, QE, BP3-BP0) when SRWD=1 and WP# is low, and becomes IO2 when QE=1 in Quad SPI and QPI modes. |
| 4 | GND | power_in | Ground reference for Vcc. |
| 5 | SI (IO0) | bidirectional | Serial Data Input in standard SPI (latched on the rising edge of SCK), and bidirectional IO0 in Dual and Quad SPI and QPI modes. |
| 6 | SCK | input | Serial Data Clock that synchronizes input and output timing. |
| 7 | HOLD# or RESET# (IO3) | bidirectional | HOLD# (P7=0, default) pauses serial communication while selected, or RESET# hardware reset (P7=1), selected by the P7 bit of the Read Register when QE=0; becomes IO3 when QE=1. |
| 8 | Vcc | power_in | Device core power supply; IS25WP256D range is 1.65V to 1.95V. |
| 9 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | ISSI(Integrated Silicon Solution) |
| Package | WSON-8-EP(6x8) |
| Category | Memory |
| Pins | 9 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage range (IS25WP) | VCC | 1.65 | 1.8 | 1.95 | V | IS25WP, max 104MHz | 159 |
| Operating temperature, Extended grade E | -40 | 105 | °C | Extended Grade E | 159 | ||
| VCC supply voltage absolute maximum (IS25WP) | VCC | -0.5 | 2.5 | V | IS25WP | 159 | |
| Input voltage on all pins | -0.5 | 0.5 | V | -0.5V to VCC + 0.5V (max is VCC + 0.5V) | 159 | ||
| Output voltage on all outputs | -0.5 | 0.5 | V | -0.5V to VCC + 0.5V (max is VCC + 0.5V) | 159 | ||
| Storage temperature | -65 | 150 | °C | 159 | |||
| Lead soldering temperature, lead-free package | 260 | °C | 3 seconds | 159 | |||
| Active read current NORD 80MHz | ICC1 | 7.5 | 9 | mA | NORD at 80MHz | 160 | |
| Active read current FRD Quad 104MHz | ICC1 | 10 | 12 | mA | FRD Quad at 104MHz | 160 | |
| Active read current FRD Quad 83MHz | ICC1 | 9 | 11 | mA | FRD Quad at 83MHz | 160 | |
| Active read current FRD Single DTR 80MHz | ICC1 | 9 | 11 | mA | FRD Single DTR at 80MHz | 160 | |
| Active read current FRD Dual DTR 80MHz | ICC1 | 10 | 12 | mA | FRD Dual DTR at 80MHz | 160 | |
| Active read current FRD Quad DTR 80MHz | ICC1 | 11 | 13 | mA | FRD Quad DTR at 80MHz | 160 | |
| Program current | ICC2 | 25 | 30 | mA | CE# = VCC, 85°C (30 max also at 105°C) | 160 | |
| WRSR current | ICC3 | 25 | 30 | mA | CE# = VCC, 85°C (30 max also at 105°C) | 160 | |
| Erase current (sector/block) | ICC4 | 25 | 30 | mA | CE# = VCC, 85°C (30 max also at 105°C) | 160 | |
| Erase current (chip) | ICC5 | 25 | 30 | mA | CE# = VCC, 85°C (30 max also at 105°C) | 160 | |
| Standby current CMOS IS25WP, 85°C | ISB1 | 6 | 60 | µA | CE# = VCC, 85°C | 160 | |
| Standby current CMOS IS25WP, 105°C | ISB1 | 90 | µA | CE# = VCC, 105°C | 160 | ||
| Deep power down current IS25WP, 85°C | ISB2 | 1 | 20 | µA | CE# = VCC, 85°C | 160 | |
| Deep power down current IS25WP, 105°C | ISB2 | 30 | µA | CE# = VCC, 105°C | 160 | ||
| Input leakage current | ILI | -1 | 1 | µA | VIN = 0V to VCC | 160 | |
| Output leakage current | ILO | -1 | 1 | µA | VIN = 0V to VCC | 160 | |
| Input low voltage | VIL | -0.5 | 0.3 | V | max is 0.3VCC | 160 | |
| Input high voltage | VIH | 0.7 | 0.3 | V | min 0.7VCC, max VCC + 0.3 | 160 | |
| Output low voltage | VOL | 0.2 | V | IOL = 100 µA | 160 | ||
| Output high voltage | VOH | 0.2 | V | IOH = -100 µA; min is VCC - 0.2 | 160 | ||
| Input capacitance (CE#, SCK) | CIN | 6 | pF | VIN = 0V, TA=25°C, VCC=1.8V, 1MHz | 161 | ||
| Input/output capacitance (other pins) | CIN/OUT | 10 | pF | VIN/OUT = 0V, TA=25°C, VCC=1.8V, 1MHz | 161 | ||
| Clock frequency fast read | fCT | 0 | 104 | MHz | Vcc=1.65V~1.95V | 162 | |
| Clock frequency fast read DTR | fC2, fT2, fQ2 | 0 | 80 | MHz | 162 | ||
| Clock frequency read mode | fC | 0 | 80 | MHz | 162 | ||
| CE# high time | tCEH | 7 | ns | 162 | |||
| CE# setup time | tCS | 5 | ns | IS25WP | 162 | ||
| CE# hold time | tCH | 3 | ns | 162 | |||
| Data in setup time, normal mode | tDS | 2 | ns | Normal Mode | 162 | ||
| Data in hold time, normal mode | tDH | 2 | ns | Normal Mode | 162 | ||
| Output valid | tV | 8 | ns | @ 104MHz (CL = 30pF) | 162 | ||
| Output hold time | tOH | 2 | ns | 162 | |||
| Output disable time | tDIS | 8 | ns | 162 | |||
| Sector erase time (4Kbyte) | tEC | 100 | 300 | ms | 162 | ||
| Chip erase time | tEC | 70 | 180 | s | 162 | ||
| Page program time | tPP | 0.2 | 0.8 | ms | 162 | ||
| Release deep power down | tRES1 | 5 | µs | IS25WP | 163 | ||
| Write status register time | tW | 2 | 15 | ms | 163 | ||
| Write inhibit voltage | VWI | 1.4 | V | IS25WP | 166 | ||
| Vcc(min) to CE# low | tVCE | 1 | ms | 166 | |||
| Power-up time delay to write instruction | tPUW | 1 | 10 | ms | 166 | ||
| Endurance | 100000 | Cycles | JEDEC Standard A117 | 167 | |||
| Data retention | 20 | Years | JEDEC Standard A103 | 167 |
CAD (KiCad official)
- Symbol:
IS25WP256D-JLLE - Footprint:
Package_SON:WSON-8-1EP_8x6mm_P1.27mm_EP3.4x4.3mm - 3D model: WSON-8-EP(6x8), generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 0.75 mm nominal WSON height). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions are nominal, not the manufacturer's CAD (STEP)
- 3D model files:
is25wp256d-jlle-etched.step/is25wp256d-jlle-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);is25wp256d-jlle.step/is25wp256d-jlle.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: ISSI(Integrated Silicon Solution) datasheet (173 pp, sha256
c7fc8c433c26a257, retrieved 2026-10-23, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).