Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

nRF24LE1-F16Q32-R

Nordic Semicon · RF Transceiver ICs · QFN-32-EP(5x5)

nRF24LE1-F16Q32-R from Nordic Semicon, in a QFN-32-EP(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 P0.1 bidirectional General purpose digital/analog I/O (default GPIO, AIN1); it is also the CLKLF crystal pin when CLKLFCTRL[2:0]=000 and the low-amplitude or digital clock input for CLKLFCTRL values 011 and 100.
2 VDD power_in Power supply, +1.9 V to +3.6 V DC.
3 DEC1 power_out Power supply output for de-coupling; 100 nF is used on DEC1 in the reference design.
4 DEC2 power_out Power supply output for de-coupling; 33 nF is used on DEC2 in the reference design.
5 P0.2 bidirectional General purpose digital/analog I/O (default GPIO, AIN2); alternate functions include PWM0 output, SSCK input and flash FSCK input.
6 PROG input Input to enable flash programming.
7 P0.3 bidirectional General purpose digital/analog I/O (default GPIO, AIN3); alternate functions include PWM1 output and UART/TXD, combined with an AND gate when configured as output.
8 VSS power_in Ground (0 V).
9 VDD power_in Power supply, +1.9 V to +3.6 V DC.
10 P0.4 bidirectional General purpose digital/analog I/O (default GPIO, AIN4); alternate functions include W2SCL 2-wire inout and UART/RXD.
11 P0.5 bidirectional General purpose digital/analog I/O (default GPIO, AIN5); alternate functions include W2SDA 2-wire inout, SSCK input, GPINT0 and flash FSCK input.
12 P0.6 bidirectional General purpose digital/analog I/O (default GPIO, AIN6); alternate function GPINT1 external interrupt.
13 P0.7 bidirectional General purpose digital/analog I/O (default GPIO, AIN7); alternate functions include SMOSI input, OCITCK, T0 and flash FMOSI input.
14 P1.0 bidirectional General purpose digital/analog I/O (default GPIO, AIN8); alternate functions include SPI slave SMISO output, OCITMS, T1 and flash FMISO output.
15 P1.1 bidirectional General purpose digital/analog I/O (default GPIO, AIN9); alternate functions include SPI slave SCSN input, OCITDI, and flash FCSN input (active only when PROG is high).
16 P1.2 bidirectional General purpose digital/analog I/O (default GPIO, AIN10); alternate function OCITDO trace output for the HW debugger.
17 P1.3 bidirectional General purpose I/O (default GPIO); alternate function OCITO trigger output for the HW debugger.
18 P1.4 bidirectional General purpose I/O (default GPIO); alternate function SPI master clock MSCK output.
19 RESET input Reset for the microcontroller, active low.
20 VDD_PA power_out Power supply output (+1.8 V) for the on-chip RF power amplifier.
21 ANT1 passive Differential RF antenna connection (TX and RX).
22 ANT2 passive Differential RF antenna connection (TX and RX).
23 VSS power_in Ground (0 V).
24 VDD power_in Power supply, +1.9 V to +3.6 V DC.
25 IREF passive Device reference current output, to be connected to a reference resistor on the PCB (22 kΩ, 1% in the reference design).
26 VSS power_in Ground (0 V).
27 VDD power_in Power supply, +1.9 V to +3.6 V DC.
28 P1.5 bidirectional General purpose I/O (default GPIO); alternate function SPI master data MMOSI output.
29 P1.6 bidirectional General purpose I/O (default GPIO); alternate function SPI master data MMISO input.
30 XC2 passive Crystal connection for the 16 MHz crystal.
31 XC1 passive Crystal connection for the 16 MHz crystal.
32 P0.0 bidirectional General purpose analog/digital I/O (default GPIO, AIN0); it is also the CLKLF crystal pin (crystal between P0.0 and P0.1 when CLKLFCTRL[2:0]=000).
33 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Nordic Semicon
Package QFN-32-EP(5x5)
Category RF & Radio
Pins 33

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltages VDD VDD -0.3 3.6 V 176
I/O pin voltage VIO -0.3 3.6 V Printed max VDD +0.3, max 3.6 V 176
Operating temperature -40 85 °C 176
Storage temperature -40 125 °C 176
Supply voltage VDD 1.9 3 3.6 V 177
Supply rise time (0V to 1.9V) tR_VDD 1 50 µs / ms 0 V to 1.9 V; printed min 1 µs, max 50 ms 177
Operating temperature TA -40 85 °C 177
Output low voltage (std. drive) VOL 0.3 V std. drive, 0.5 mA 178
Output low voltage (high-drive) VOL 0.3 V high-drive, 5 mA 178
Pull-up resistance RPU 11 13 16 kΩ 178
Pull-down resistance RPD 11 13 16 kΩ 178
Operating frequency fOP 2400 2525 MHz Usable band set by local regulations (footnote a) 178
Frequency deviation @ 250 kbps Δf250 -160 160 kHz @ 250 kbps 178
Frequency deviation @ 1 Mbps Δf1M -160 160 kHz @ 1 Mbps 178
Frequency deviation @ 2 Mbps Δf2M -320 320 kHz @ 2 Mbps 178
Air data rate RGFSK 250 2000 kbps Data rate in each burst on-air (footnote b) 178
Maximum output power PRF 0 4 dBm 178
RF power control range PRFC 16 18 20 dB 178
RF power accuracy PRFCR -4 4 dB 178
20dB bandwidth for modulated carrier PBW2 1800 2000 kHz 2 Mbps 178
20dB bandwidth for modulated carrier PBW1 950 1100 kHz 1 Mbps 178
20dB bandwidth for modulated carrier PBW250 700 800 kHz 250 kbps 178
External reference voltage VREF_EXT 1.15 1.5 V 180
Input offset voltage (analog comparator) VOS -50 50 mV 100 kΩ source resistance and 330 pF bypass capacitor (footnote n) 180
Frequency tolerance (16 MHz crystal) fTOL -60 60 ppm Includes initial accuracy, temperature, aging and load pulling (footnote o) 181
Load capacitance (16 MHz crystal) CL 12 16 pF 181
Shunt capacitance (16 MHz crystal) C0 3 7 pF 181
Equivalent series resistance (16 MHz crystal) ESR 50 100 Ω 181
Load capacitance (32 kHz crystal) CL 9 12.5 pF 181
Shunt capacitance (32 kHz crystal) C0 1 2 pF 181
Equivalent series resistance (32 kHz crystal) ESR 50 80 kΩ 181
Frequency tolerance (16 MHz RC oscillator) fTOL -5 5 % 181
Frequency tolerance (32 kHz RC oscillator) fTOL -10 10 % 181
Threshold voltage tolerance (power-fail comparator) VTOL -5 5 % 181

CAD (KiCad official)

  • Symbol: nRF24LE1-F16Q32-R
  • Footprint: Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.3x3.3mm
  • 3D model: QFN-32-EP(5x5) (KiCad packages3D, STEP)
  • 3D model files: nrf24le1-f16q32-r-etched.step / nrf24le1-f16q32-r-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); nrf24le1-f16q32-r.step / nrf24le1-f16q32-r.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Nordic Semicon datasheet (196 pp, sha256 8111e191c50705c4, retrieved 2026-10-31, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF