Generated by kicad-footprint-generator · KiCad file format 20260206
nRF24LE1-F16Q32-R
Nordic Semicon · RF Transceiver ICs · QFN-32-EP(5x5)
nRF24LE1-F16Q32-R from Nordic Semicon, in a QFN-32-EP(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | P0.1 | bidirectional | General purpose digital/analog I/O (default GPIO, AIN1); it is also the CLKLF crystal pin when CLKLFCTRL[2:0]=000 and the low-amplitude or digital clock input for CLKLFCTRL values 011 and 100. |
| 2 | VDD | power_in | Power supply, +1.9 V to +3.6 V DC. |
| 3 | DEC1 | power_out | Power supply output for de-coupling; 100 nF is used on DEC1 in the reference design. |
| 4 | DEC2 | power_out | Power supply output for de-coupling; 33 nF is used on DEC2 in the reference design. |
| 5 | P0.2 | bidirectional | General purpose digital/analog I/O (default GPIO, AIN2); alternate functions include PWM0 output, SSCK input and flash FSCK input. |
| 6 | PROG | input | Input to enable flash programming. |
| 7 | P0.3 | bidirectional | General purpose digital/analog I/O (default GPIO, AIN3); alternate functions include PWM1 output and UART/TXD, combined with an AND gate when configured as output. |
| 8 | VSS | power_in | Ground (0 V). |
| 9 | VDD | power_in | Power supply, +1.9 V to +3.6 V DC. |
| 10 | P0.4 | bidirectional | General purpose digital/analog I/O (default GPIO, AIN4); alternate functions include W2SCL 2-wire inout and UART/RXD. |
| 11 | P0.5 | bidirectional | General purpose digital/analog I/O (default GPIO, AIN5); alternate functions include W2SDA 2-wire inout, SSCK input, GPINT0 and flash FSCK input. |
| 12 | P0.6 | bidirectional | General purpose digital/analog I/O (default GPIO, AIN6); alternate function GPINT1 external interrupt. |
| 13 | P0.7 | bidirectional | General purpose digital/analog I/O (default GPIO, AIN7); alternate functions include SMOSI input, OCITCK, T0 and flash FMOSI input. |
| 14 | P1.0 | bidirectional | General purpose digital/analog I/O (default GPIO, AIN8); alternate functions include SPI slave SMISO output, OCITMS, T1 and flash FMISO output. |
| 15 | P1.1 | bidirectional | General purpose digital/analog I/O (default GPIO, AIN9); alternate functions include SPI slave SCSN input, OCITDI, and flash FCSN input (active only when PROG is high). |
| 16 | P1.2 | bidirectional | General purpose digital/analog I/O (default GPIO, AIN10); alternate function OCITDO trace output for the HW debugger. |
| 17 | P1.3 | bidirectional | General purpose I/O (default GPIO); alternate function OCITO trigger output for the HW debugger. |
| 18 | P1.4 | bidirectional | General purpose I/O (default GPIO); alternate function SPI master clock MSCK output. |
| 19 | RESET | input | Reset for the microcontroller, active low. |
| 20 | VDD_PA | power_out | Power supply output (+1.8 V) for the on-chip RF power amplifier. |
| 21 | ANT1 | passive | Differential RF antenna connection (TX and RX). |
| 22 | ANT2 | passive | Differential RF antenna connection (TX and RX). |
| 23 | VSS | power_in | Ground (0 V). |
| 24 | VDD | power_in | Power supply, +1.9 V to +3.6 V DC. |
| 25 | IREF | passive | Device reference current output, to be connected to a reference resistor on the PCB (22 kΩ, 1% in the reference design). |
| 26 | VSS | power_in | Ground (0 V). |
| 27 | VDD | power_in | Power supply, +1.9 V to +3.6 V DC. |
| 28 | P1.5 | bidirectional | General purpose I/O (default GPIO); alternate function SPI master data MMOSI output. |
| 29 | P1.6 | bidirectional | General purpose I/O (default GPIO); alternate function SPI master data MMISO input. |
| 30 | XC2 | passive | Crystal connection for the 16 MHz crystal. |
| 31 | XC1 | passive | Crystal connection for the 16 MHz crystal. |
| 32 | P0.0 | bidirectional | General purpose analog/digital I/O (default GPIO, AIN0); it is also the CLKLF crystal pin (crystal between P0.0 and P0.1 when CLKLFCTRL[2:0]=000). |
| 33 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Nordic Semicon |
| Package | QFN-32-EP(5x5) |
| Category | RF & Radio |
| Pins | 33 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltages VDD | VDD | -0.3 | 3.6 | V | 176 | ||
| I/O pin voltage | VIO | -0.3 | 3.6 | V | Printed max VDD +0.3, max 3.6 V | 176 | |
| Operating temperature | -40 | 85 | °C | 176 | |||
| Storage temperature | -40 | 125 | °C | 176 | |||
| Supply voltage | VDD | 1.9 | 3 | 3.6 | V | 177 | |
| Supply rise time (0V to 1.9V) | tR_VDD | 1 | 50 | µs / ms | 0 V to 1.9 V; printed min 1 µs, max 50 ms | 177 | |
| Operating temperature | TA | -40 | 85 | °C | 177 | ||
| Output low voltage (std. drive) | VOL | 0.3 | V | std. drive, 0.5 mA | 178 | ||
| Output low voltage (high-drive) | VOL | 0.3 | V | high-drive, 5 mA | 178 | ||
| Pull-up resistance | RPU | 11 | 13 | 16 | kΩ | 178 | |
| Pull-down resistance | RPD | 11 | 13 | 16 | kΩ | 178 | |
| Operating frequency | fOP | 2400 | 2525 | MHz | Usable band set by local regulations (footnote a) | 178 | |
| Frequency deviation @ 250 kbps | Δf250 | -160 | 160 | kHz | @ 250 kbps | 178 | |
| Frequency deviation @ 1 Mbps | Δf1M | -160 | 160 | kHz | @ 1 Mbps | 178 | |
| Frequency deviation @ 2 Mbps | Δf2M | -320 | 320 | kHz | @ 2 Mbps | 178 | |
| Air data rate | RGFSK | 250 | 2000 | kbps | Data rate in each burst on-air (footnote b) | 178 | |
| Maximum output power | PRF | 0 | 4 | dBm | 178 | ||
| RF power control range | PRFC | 16 | 18 | 20 | dB | 178 | |
| RF power accuracy | PRFCR | -4 | 4 | dB | 178 | ||
| 20dB bandwidth for modulated carrier | PBW2 | 1800 | 2000 | kHz | 2 Mbps | 178 | |
| 20dB bandwidth for modulated carrier | PBW1 | 950 | 1100 | kHz | 1 Mbps | 178 | |
| 20dB bandwidth for modulated carrier | PBW250 | 700 | 800 | kHz | 250 kbps | 178 | |
| External reference voltage | VREF_EXT | 1.15 | 1.5 | V | 180 | ||
| Input offset voltage (analog comparator) | VOS | -50 | 50 | mV | 100 kΩ source resistance and 330 pF bypass capacitor (footnote n) | 180 | |
| Frequency tolerance (16 MHz crystal) | fTOL | -60 | 60 | ppm | Includes initial accuracy, temperature, aging and load pulling (footnote o) | 181 | |
| Load capacitance (16 MHz crystal) | CL | 12 | 16 | pF | 181 | ||
| Shunt capacitance (16 MHz crystal) | C0 | 3 | 7 | pF | 181 | ||
| Equivalent series resistance (16 MHz crystal) | ESR | 50 | 100 | Ω | 181 | ||
| Load capacitance (32 kHz crystal) | CL | 9 | 12.5 | pF | 181 | ||
| Shunt capacitance (32 kHz crystal) | C0 | 1 | 2 | pF | 181 | ||
| Equivalent series resistance (32 kHz crystal) | ESR | 50 | 80 | kΩ | 181 | ||
| Frequency tolerance (16 MHz RC oscillator) | fTOL | -5 | 5 | % | 181 | ||
| Frequency tolerance (32 kHz RC oscillator) | fTOL | -10 | 10 | % | 181 | ||
| Threshold voltage tolerance (power-fail comparator) | VTOL | -5 | 5 | % | 181 |
CAD (KiCad official)
- Symbol:
nRF24LE1-F16Q32-R - Footprint:
Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.3x3.3mm - 3D model: QFN-32-EP(5x5) (KiCad packages3D, STEP)
- 3D model files:
nrf24le1-f16q32-r-etched.step/nrf24le1-f16q32-r-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);nrf24le1-f16q32-r.step/nrf24le1-f16q32-r.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Nordic Semicon datasheet (196 pp, sha256
8111e191c50705c4, retrieved 2026-10-31, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).