Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

TLV1872

Texas Instruments · IC · VSSOP-10 (DGS)

TLV1872 from Texas Instruments, in a VSSOP-10 (DGS). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). The symbol is generated from that pin table and the footprint is an Adom_Gen land derived from the manufacturer drawing; the 3D model is generated to fit it.

Pinout

Pin Name Type Function
1 VEEO power_in Output negative supply voltage, which the absolute maximum ratings limit to between VEEI and VEEI + 20 V.
2 OUT1 output Output pin of comparator 1, diode-clamped to VEEO and VCCO and rated from VEEO − 0.3 V to VCCO + 0.3 V.
3 IN1- input Inverting input of comparator 1, rated from VEEI − 0.3 V to VCCI + 0.3 V with input current limited to 10 mA.
4 IN1+ input Non-inverting input of comparator 1, rated from VEEI − 0.3 V to VCCI + 0.3 V with input current limited to 10 mA.
5 VEEI power_in Input negative supply voltage, forming an input supply (VCCI − VEEI) rated from −0.3 V to 42 V.
6 IN2+ input Non-inverting input of comparator 2, rated from VEEI − 0.3 V to VCCI + 0.3 V with input current limited to 10 mA.
7 IN2- input Inverting input of comparator 2, rated from VEEI − 0.3 V to VCCI + 0.3 V with input current limited to 10 mA.
8 OUT2 output Output pin of comparator 2, diode-clamped to VEEO and VCCO and rated from VEEO − 0.3 V to VCCO + 0.3 V.
9 VCCI power_in Input positive supply voltage, forming an input supply (VCCI − VEEI) rated from −0.3 V to 42 V.
10 VCCO power_in Output positive supply voltage, rated from VEEO − 0.3 V to VCCI + 0.3 V.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package VSSOP-10 (DGS)
Category
Pins 10

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input supply voltage (VCCI, VEEI) absolute maximum VCCI, VEEI -0.3 42 V 5
Current into input pins (IN+, IN-) -10 10 mA 5
Output short circuit current -10 10 mA 5
Junction temperature TJ 150 °C 5
Storage temperature Tstg -65 150 °C 5
Input supply voltage VCCI, VEEI recommended VCCI, VEEI 2.7 40 V 6
Ambient temperature TA -40 125 °C 6
ESD human-body model (HBM) V(ESD) -2000 2000 V Human-body model (HBM), per ANSI/ESDA/JEDEC JS-001 5
ESD charged-device model (CDM) V(ESD) -1000 1000 V Charged-device model (CDM), per JEDEC JESD22-C101 5
Input offset voltage VOS -2.5 0.3 2.5 mV TA = 25°C 7
Input offset voltage over temperature VOS -3 3 mV TA = -40°C to +125°C 7
Input offset voltage drift dVIO/dT -1.2 1.2 µV/°C TA = -40°C to +125°C 7
Quiescent current per comparator, output high IQ 75 100 µA No Load, Output High, TA = 25°C 7
Quiescent current per comparator, output high IQ 105 µA No Load, Output High, TA = -40°C to +125°C 7
Quiescent current per comparator, output low IQ 100 135 µA No Load, Output Low, TA = 25°C 7
Quiescent current per comparator, output low IQ 140 µA No Load, Output Low, TA = -40°C to +125°C 7
Input bias current over temperature IB -5 5 nA TA = -40°C to +125°C 7
Voltage swing from VEEO (low output) VOL 300 mV ISINK = 4mA, TA = -40°C to +125°C 7
Voltage swing from VCCO (high output) VOH 300 mV ISOURCE = 4mA, TA = -40°C to +125°C 7
Short-circuit current, sinking IOL 30 mA TA = -40°C to +125°C 7
Short-circuit current, sourcing IOH 30 mA TA = -40°C to +125°C 7
Power-on reset threshold VPOR 1.9 V 7
Input bias current IB 500 pA 7
Input offset current IOS 10 pA 7
Input capacitance, differential CID 5 pF 7
Input capacitance, common mode CIC 5 pF 7
Toggle frequency FTOGGLE 7.5 MHz VID = 200mV 8
Propagation delay, high-to-low TPD-HL 110 ns VOD = 10mV, VUD = 100mV 8
Propagation delay, high-to-low TPD-HL 65 ns VOD = 100mV, VUD = 100mV 8
Propagation delay, low-to-high TPD-LH 110 ns VOD = 10mV, VUD = 100mV 8
Propagation delay, low-to-high TPD-LH 65 ns VOD = 100mV, VUD = 100mV 8
Output rise time, 20% to 80% TRISE 5 ns VOD = 100mV, VUD = 100mV 8
Output fall time, 80% to 20% TFALL 5 ns VOD = 100mV, VUD = 100mV 8
Power-on time PON 80 µs 8
Junction-to-ambient thermal resistance (DGS, 10 pins) RθJA 151.4 °C/W 6
Junction-to-case (top) thermal resistance (DGS, 10 pins) RθJC(top) 55 °C/W 6
Junction-to-board thermal resistance (DGS, 10 pins) RθJB 84.9 °C/W 6
Junction-to-top characterization parameter (DGS, 10 pins) ψJT 3.2 °C/W 6
Junction-to-board characterization parameter (DGS, 10 pins) ψJB 83.7 °C/W 6

CAD (Adom-generated)

  • Symbol: TLV1872
  • Footprint: Adom_Gen:Texas_Instruments_TLV1872
  • 3D model: generated to fit the land (STEP)
  • 3D model files: tlv1872-etched.step / tlv1872-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tlv1872.step / tlv1872.glb are the bare package body.

Provenance

No distributor stocks TLV1872 yet. This page was built from the datasheet.

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (34 pp, sha256 4dd501445dee1a26, retrieved 2026-11-04, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: symbol generated from the datasheet pin table; footprint an Adom_Gen land derived from the manufacturer drawing. 3D model generated to fit that land.

Datasheet PDF