component
TLV1872
Public Made by Adomby adom
Texas Instruments , VSSOP-10 (DGS). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
Generated by adom_assets · KiCad file format 20240108
TLV1872
Texas Instruments · IC · VSSOP-10 (DGS)
TLV1872 from Texas Instruments, in a VSSOP-10 (DGS). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). The symbol is generated from that pin table and the footprint is an Adom_Gen land derived from the manufacturer drawing; the 3D model is generated to fit it.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VEEO | power_in | Output negative supply voltage, which the absolute maximum ratings limit to between VEEI and VEEI + 20 V. |
| 2 | OUT1 | output | Output pin of comparator 1, diode-clamped to VEEO and VCCO and rated from VEEO − 0.3 V to VCCO + 0.3 V. |
| 3 | IN1- | input | Inverting input of comparator 1, rated from VEEI − 0.3 V to VCCI + 0.3 V with input current limited to 10 mA. |
| 4 | IN1+ | input | Non-inverting input of comparator 1, rated from VEEI − 0.3 V to VCCI + 0.3 V with input current limited to 10 mA. |
| 5 | VEEI | power_in | Input negative supply voltage, forming an input supply (VCCI − VEEI) rated from −0.3 V to 42 V. |
| 6 | IN2+ | input | Non-inverting input of comparator 2, rated from VEEI − 0.3 V to VCCI + 0.3 V with input current limited to 10 mA. |
| 7 | IN2- | input | Inverting input of comparator 2, rated from VEEI − 0.3 V to VCCI + 0.3 V with input current limited to 10 mA. |
| 8 | OUT2 | output | Output pin of comparator 2, diode-clamped to VEEO and VCCO and rated from VEEO − 0.3 V to VCCO + 0.3 V. |
| 9 | VCCI | power_in | Input positive supply voltage, forming an input supply (VCCI − VEEI) rated from −0.3 V to 42 V. |
| 10 | VCCO | power_in | Output positive supply voltage, rated from VEEO − 0.3 V to VCCI + 0.3 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VSSOP-10 (DGS) |
| Category | |
| Pins | 10 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input supply voltage (VCCI, VEEI) absolute maximum | VCCI, VEEI | -0.3 | 42 | V | 5 | ||
| Current into input pins (IN+, IN-) | -10 | 10 | mA | 5 | |||
| Output short circuit current | -10 | 10 | mA | 5 | |||
| Junction temperature | TJ | 150 | °C | 5 | |||
| Storage temperature | Tstg | -65 | 150 | °C | 5 | ||
| Input supply voltage VCCI, VEEI recommended | VCCI, VEEI | 2.7 | 40 | V | 6 | ||
| Ambient temperature | TA | -40 | 125 | °C | 6 | ||
| ESD human-body model (HBM) | V(ESD) | -2000 | 2000 | V | Human-body model (HBM), per ANSI/ESDA/JEDEC JS-001 | 5 | |
| ESD charged-device model (CDM) | V(ESD) | -1000 | 1000 | V | Charged-device model (CDM), per JEDEC JESD22-C101 | 5 | |
| Input offset voltage | VOS | -2.5 | 0.3 | 2.5 | mV | TA = 25°C | 7 |
| Input offset voltage over temperature | VOS | -3 | 3 | mV | TA = -40°C to +125°C | 7 | |
| Input offset voltage drift | dVIO/dT | -1.2 | 1.2 | µV/°C | TA = -40°C to +125°C | 7 | |
| Quiescent current per comparator, output high | IQ | 75 | 100 | µA | No Load, Output High, TA = 25°C | 7 | |
| Quiescent current per comparator, output high | IQ | 105 | µA | No Load, Output High, TA = -40°C to +125°C | 7 | ||
| Quiescent current per comparator, output low | IQ | 100 | 135 | µA | No Load, Output Low, TA = 25°C | 7 | |
| Quiescent current per comparator, output low | IQ | 140 | µA | No Load, Output Low, TA = -40°C to +125°C | 7 | ||
| Input bias current over temperature | IB | -5 | 5 | nA | TA = -40°C to +125°C | 7 | |
| Voltage swing from VEEO (low output) | VOL | 300 | mV | ISINK = 4mA, TA = -40°C to +125°C | 7 | ||
| Voltage swing from VCCO (high output) | VOH | 300 | mV | ISOURCE = 4mA, TA = -40°C to +125°C | 7 | ||
| Short-circuit current, sinking | IOL | 30 | mA | TA = -40°C to +125°C | 7 | ||
| Short-circuit current, sourcing | IOH | 30 | mA | TA = -40°C to +125°C | 7 | ||
| Power-on reset threshold | VPOR | 1.9 | V | 7 | |||
| Input bias current | IB | 500 | pA | 7 | |||
| Input offset current | IOS | 10 | pA | 7 | |||
| Input capacitance, differential | CID | 5 | pF | 7 | |||
| Input capacitance, common mode | CIC | 5 | pF | 7 | |||
| Toggle frequency | FTOGGLE | 7.5 | MHz | VID = 200mV | 8 | ||
| Propagation delay, high-to-low | TPD-HL | 110 | ns | VOD = 10mV, VUD = 100mV | 8 | ||
| Propagation delay, high-to-low | TPD-HL | 65 | ns | VOD = 100mV, VUD = 100mV | 8 | ||
| Propagation delay, low-to-high | TPD-LH | 110 | ns | VOD = 10mV, VUD = 100mV | 8 | ||
| Propagation delay, low-to-high | TPD-LH | 65 | ns | VOD = 100mV, VUD = 100mV | 8 | ||
| Output rise time, 20% to 80% | TRISE | 5 | ns | VOD = 100mV, VUD = 100mV | 8 | ||
| Output fall time, 80% to 20% | TFALL | 5 | ns | VOD = 100mV, VUD = 100mV | 8 | ||
| Power-on time | PON | 80 | µs | 8 | |||
| Junction-to-ambient thermal resistance (DGS, 10 pins) | RθJA | 151.4 | °C/W | 6 | |||
| Junction-to-case (top) thermal resistance (DGS, 10 pins) | RθJC(top) | 55 | °C/W | 6 | |||
| Junction-to-board thermal resistance (DGS, 10 pins) | RθJB | 84.9 | °C/W | 6 | |||
| Junction-to-top characterization parameter (DGS, 10 pins) | ψJT | 3.2 | °C/W | 6 | |||
| Junction-to-board characterization parameter (DGS, 10 pins) | ψJB | 83.7 | °C/W | 6 |
CAD (Adom-generated)
- Symbol:
TLV1872 - Footprint:
Adom_Gen:Texas_Instruments_TLV1872 - 3D model: generated to fit the land (STEP)
- 3D model files:
tlv1872-etched.step/tlv1872-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tlv1872.step/tlv1872.glbare the bare package body.
Provenance
No distributor stocks TLV1872 yet. This page was built from the datasheet.
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (34 pp, sha256
4dd501445dee1a26, retrieved 2026-11-04, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: symbol generated from the datasheet pin table; footprint an Adom_Gen land derived from the manufacturer drawing. 3D model generated to fit that land.