Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

LT8911EXB

LONTIUM SEMICONDUCTOR · Video Interface ICs · QFN-48-EP(6x6)

LT8911EXB from LONTIUM SEMICONDUCTOR, in a QFN-48-EP(6x6). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VCC18_RXPLL power_in 1.8V power supply for the RXPLL.
2 S_SCL input I2C serial port data clock slave for register access, supporting 1.8V CMOS logic.
3 S_SDA bidirectional I2C serial port data IO slave for register access, supporting 1.8V CMOS logic.
4 GPIO5_IRQO2 bidirectional Default function is interrupt request (IRQ) output; when configured as GPIO it serves as a digital test signal output.
5 VCC18_RXPLL power_in 1.8V power supply for the RXPLL.
6 VDD power_in 1.8V power supply for the digital core.
7 GPIO6_EN bidirectional Default function is high-active chip enable input; when configured as GPIO it serves as a digital test signal output.
8 GPIO7_ETXHPD2 bidirectional Default function is eDP TX hot-plug detect input; when configured as GPIO it serves as a digital test signal output.
9 VDD power_in 1.8V power supply for the digital core.
10 ETX_AUXN output eDP TX AUX channel negative output.
11 ETX_AUXP output eDP TX AUX channel positive output.
12 VCC18_AUX power_in 1.8V power supply for the eDP AUX channel.
13 ETX_D3N output eDP TX PHY port-A data lane-3 negative output, carrying data up to 2.7Gb/s.
14 ETX_D3P output eDP TX PHY port-A data lane-3 positive output, carrying data up to 2.7Gb/s.
15 VCC18_ETX power_in 1.8V power supply for the eDP TX PHY.
16 ETX_D2N output eDP TX PHY port-A data lane-2 negative output, carrying data up to 2.7Gb/s.
17 ETX_D2P output eDP TX PHY port-A data lane-2 positive output, carrying data up to 2.7Gb/s.
18 VCC18_EPLL power_in 1.8V power supply for the eDP TX PLL.
19 ETX_D1N output eDP TX PHY port-A data lane-1 negative output, carrying data up to 2.7Gb/s.
20 ETX_D1P output eDP TX PHY port-A data lane-1 positive output, carrying data up to 2.7Gb/s.
21 VCC18_ETX power_in 1.8V power supply for the eDP TX PHY.
22 ETX_D0N output eDP TX PHY port-A data lane-0 negative output, carrying data up to 2.7Gb/s.
23 ETX_D0P output eDP TX PHY port-A data lane-0 positive output, carrying data up to 2.7Gb/s.
24 VCC18_BGP power_in 1.8V power supply for the bandgap.
25 R6K passive External 6K resistor connection for setting the internal reference current.
26 VCC18_SPLL power_in 1.8V power supply for the system PLL.
27 VCC18_XTAL power_in 1.8V power supply for the crystal IO.
28 XTALO passive Crystal oscillator connection, attached between this pin and XTALI; must be left floating if XTALI is used as reference clock input.
29 XTALI input Crystal oscillator connection or CMOS 1.8V compatible reference clock input, attached between this pin and XTALO when a crystal is used.
30 VDD power_in 1.8V power supply for the digital core.
31 S_ADR input I2C device address select for the serial port, supporting 1.8V CMOS logic.
32 GPIO4 bidirectional Digital test signal output when configured as GPIO.
33 VDD power_in 1.8V power supply for the digital core.
34 VDD power_in 1.8V power supply for the digital core.
35 RESET_N input Hardware reset input, chip reset signal active LOW.
36 VCC18_MLRX power_in 1.8V power supply for the MIPI D-PHY receiver (MLRX).
37 MLRX_DA3N input MIPI D-PHY port-A data lane-3 negative input, uni-directional polarity swappable differential pair up to 1.5Gb/s.
38 MLRX_DA3P input MIPI D-PHY port-A data lane-3 positive input, uni-directional polarity swappable differential pair up to 1.5Gb/s.
39 VCC18_MLRX power_in 1.8V power supply for the MIPI D-PHY receiver (MLRX).
40 MLRX_DA2N input MIPI D-PHY port-A data lane-2 negative input, uni-directional polarity swappable differential pair up to 1.5Gb/s.
41 MLRX_DA2P input MIPI D-PHY port-A data lane-2 positive input, uni-directional polarity swappable differential pair up to 1.5Gb/s.
42 MLRX_DACN input MIPI D-PHY port-A data clock lane negative input, DDR clock differential pair up to 750Mb/s in quadrature phase with data signals.
43 MLRX_DACP input MIPI D-PHY port-A data clock lane positive input, DDR clock differential pair up to 750Mb/s in quadrature phase with data signals.
44 MLRX_DA1N input MIPI D-PHY port-A data lane-1 negative input, uni-directional polarity swappable differential pair up to 1.5Gb/s.
45 MLRX_DA1P input MIPI D-PHY port-A data lane-1 positive input, uni-directional polarity swappable differential pair up to 1.5Gb/s.
46 VCC18_MLRX power_in 1.8V power supply for the MIPI D-PHY receiver (MLRX).
47 MLRX_DA0N input MIPI D-PHY port-A data lane-0 negative input, uni-directional polarity swappable differential pair up to 1.5Gb/s.
48 MLRX_DA0P input MIPI D-PHY port-A data lane-0 positive input, uni-directional polarity swappable differential pair up to 1.5Gb/s.
49 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer LONTIUM SEMICONDUCTOR
Package QFN-48-EP(6x6)
Category Communication Interface Chip/UART/485/232
Pins 49

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
1.8V Power Supply Voltage VCC18_MLRX, VCC18_ETX, VCC18_SPLL, VCC18_XTAL, VCC18_BGP, VDD 1.62 1.8 1.98 V Normal operating conditions 9
1.8V Power Supply Voltage VCC18_MLRX, VCC18_ETX, VCC18_SPLL, VCC18_XTAL, VCC18_BGP, VDD -0.3 2 V Absolute maximum 9
CMOS Terminal Input Voltage Range VI -0.3 2 V 9
CMOS Terminal Output Voltage Range VO -0.3 2 V 9
Storage Temperature TS -55 125 ℃ 9
Operating Free-air Temperature TA -40 27 85 ℃ 9
Power Supply Voltage Noise VCCN 50 mV 9
Differential input high voltage threshold VIDTH 70 mV MIPI HS line receiver DC 9
Differential input low voltage threshold VIDTL -70 mV MIPI HS line receiver DC 9
Single ended input high voltage VIHHS 460 mV MIPI HS line receiver DC 9
Single ended input low voltage VILHS -40 mV MIPI HS line receiver DC 9
Input common mode voltage VCMRXDC 70 330 mV MIPI HS line receiver DC 9
Differential input impedance 80 125 Ω MIPI HS line receiver DC 9
Logic 0 input voltage, in ULP State VIL-ULPS 300 mV MIPI LP line receiver DC 9
Logic 0 input voltage, not in ULP State VIL 550 mV MIPI LP line receiver DC 9
Input high voltage VIH 880 mV MIPI LP line receiver DC 9
Input hysteresis VHYST 25 mV MIPI LP line receiver DC 9
Input low fault threshold VILF 200 450 mV MIPI contention line receiver DC 10
TX DC Bias Voltage Vbias_TX 0 2 V eDP transmitter DC 10
TX AC Common Mode Voltage Vtx_ac_cm_hbr2 20 mV rms 10
TX AC Common Mode Voltage Vtx_ac_cm_hbr2 30 mV rms 10
Differential Peak to Peak Output Swing Level0 Vtx_diff_vpp_level0 0.34 0.4 0.46 V 10
Differential Peak to Peak Output Swing Level1 Vtx_diff_vpp_level1 0.51 0.6 0.68 V 10
Differential Peak to Peak Output Swing Level2 Vtx_diff_vpp_level2 0.69 0.8 0.92 V 10
Pre-emphasis level 0 Vtx_pre_emp_ratio 0 0 0 dB 10
Pre-emphasis level 1 Vtx_pre_emp_ratio 2.8 3.5 4.2 dB 10
Pre-emphasis level 2 Vtx_pre_emp_ratio 4.8 6 7.2 dB 10
Pre-emphasis level 3 Vtx_pre_emp_ratio 7.5 9.5 11.4 dB 10
Ctx AC couple capacitance Ctx 75 200 nF 10
TX short circuit current limit TX_SHORT 50 mA 10
Differential Impedance RTX_DIFF 80 100 120 Ω 10
Common mode interference beyond 450MHz ΔVCMRX(HF) 200 mVpp MIPI HS line receiver AC 10
Common mode interference between 50MHz and 450MHz ΔVCMRX(LF) -50 50 mVpp MIPI HS line receiver AC 10
Common mode termination Ccm 60 pF MIPI HS line receiver AC 10
Termination Resister Rterm 80 100 125 Ω MIPI HS line receiver AC 10
Input pulse rejection eSPIKE 300 V.ps MIPI LP line receiver AC 10
Minimum pulse response TMIN 20 ns MIPI LP line receiver AC 10
Peak interference voltage VINT 200 mV MIPI LP line receiver AC 10
Interference frequency fINT 450 MHz MIPI LP line receiver AC 10
Minimum TX eye width at pkg pin Ttx_eye_chip_HBR 0.72 UI HBR 10
Maximum time between the jitter median and maximum deviation from the median at TX pkg pin Ttx_jitter_HBR 0.147 UI HBR 10
Minimum TX eye width at pkg pin Ttx_eye_chip_RBR 0.82 UI RBR 10
Maximum time between the jitter median and maximum deviation from the median at TX pkg pin Ttx_jitter_RBR 0.09 UI RBR 10
TX output rise and fall time at TX pkg pins Ttx_rise_chip, Ttx_fall_chip 50 130 ps D+/D- TX output 11
Differential Return Loss at 0.675GHz at TX pkg pins RL_TX_DIFF 12 dB at 0.675GHz 11
Differential Return Loss at 1.35GHz at TX pkg pins RL_TX_DIFF 9 dB at 1.35GHz 11
Lane intra pair output skew at pkg pins Ttx_skew 20 ps 11
Lane intra pair rise and fall time mismatch at pkg pins Ttx_rise_fall 5 % 11

CAD (KiCad official)

  • Symbol: LT8911EXB
  • Footprint: Package_DFN_QFN:QFN-48-1EP_6x6mm_P0.4mm_EP4.2x4.2mm
  • 3D model: QFN-48-EP(6x6) (KiCad packages3D, STEP)
  • 3D model files: lt8911exb-etched.step / lt8911exb-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lt8911exb.step / lt8911exb.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: LONTIUM SEMICONDUCTOR datasheet, copy hosted by LCSC (14 pp, sha256 59db3d48fbfc4790, retrieved 2026-11-21)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF