Generated by kicad-footprint-generator · KiCad file format 20260206
LT8911EXB
LONTIUM SEMICONDUCTOR · Video Interface ICs · QFN-48-EP(6x6)
LT8911EXB from LONTIUM SEMICONDUCTOR, in a QFN-48-EP(6x6). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCC18_RXPLL | power_in | 1.8V power supply for the RXPLL. |
| 2 | S_SCL | input | I2C serial port data clock slave for register access, supporting 1.8V CMOS logic. |
| 3 | S_SDA | bidirectional | I2C serial port data IO slave for register access, supporting 1.8V CMOS logic. |
| 4 | GPIO5_IRQO2 | bidirectional | Default function is interrupt request (IRQ) output; when configured as GPIO it serves as a digital test signal output. |
| 5 | VCC18_RXPLL | power_in | 1.8V power supply for the RXPLL. |
| 6 | VDD | power_in | 1.8V power supply for the digital core. |
| 7 | GPIO6_EN | bidirectional | Default function is high-active chip enable input; when configured as GPIO it serves as a digital test signal output. |
| 8 | GPIO7_ETXHPD2 | bidirectional | Default function is eDP TX hot-plug detect input; when configured as GPIO it serves as a digital test signal output. |
| 9 | VDD | power_in | 1.8V power supply for the digital core. |
| 10 | ETX_AUXN | output | eDP TX AUX channel negative output. |
| 11 | ETX_AUXP | output | eDP TX AUX channel positive output. |
| 12 | VCC18_AUX | power_in | 1.8V power supply for the eDP AUX channel. |
| 13 | ETX_D3N | output | eDP TX PHY port-A data lane-3 negative output, carrying data up to 2.7Gb/s. |
| 14 | ETX_D3P | output | eDP TX PHY port-A data lane-3 positive output, carrying data up to 2.7Gb/s. |
| 15 | VCC18_ETX | power_in | 1.8V power supply for the eDP TX PHY. |
| 16 | ETX_D2N | output | eDP TX PHY port-A data lane-2 negative output, carrying data up to 2.7Gb/s. |
| 17 | ETX_D2P | output | eDP TX PHY port-A data lane-2 positive output, carrying data up to 2.7Gb/s. |
| 18 | VCC18_EPLL | power_in | 1.8V power supply for the eDP TX PLL. |
| 19 | ETX_D1N | output | eDP TX PHY port-A data lane-1 negative output, carrying data up to 2.7Gb/s. |
| 20 | ETX_D1P | output | eDP TX PHY port-A data lane-1 positive output, carrying data up to 2.7Gb/s. |
| 21 | VCC18_ETX | power_in | 1.8V power supply for the eDP TX PHY. |
| 22 | ETX_D0N | output | eDP TX PHY port-A data lane-0 negative output, carrying data up to 2.7Gb/s. |
| 23 | ETX_D0P | output | eDP TX PHY port-A data lane-0 positive output, carrying data up to 2.7Gb/s. |
| 24 | VCC18_BGP | power_in | 1.8V power supply for the bandgap. |
| 25 | R6K | passive | External 6K resistor connection for setting the internal reference current. |
| 26 | VCC18_SPLL | power_in | 1.8V power supply for the system PLL. |
| 27 | VCC18_XTAL | power_in | 1.8V power supply for the crystal IO. |
| 28 | XTALO | passive | Crystal oscillator connection, attached between this pin and XTALI; must be left floating if XTALI is used as reference clock input. |
| 29 | XTALI | input | Crystal oscillator connection or CMOS 1.8V compatible reference clock input, attached between this pin and XTALO when a crystal is used. |
| 30 | VDD | power_in | 1.8V power supply for the digital core. |
| 31 | S_ADR | input | I2C device address select for the serial port, supporting 1.8V CMOS logic. |
| 32 | GPIO4 | bidirectional | Digital test signal output when configured as GPIO. |
| 33 | VDD | power_in | 1.8V power supply for the digital core. |
| 34 | VDD | power_in | 1.8V power supply for the digital core. |
| 35 | RESET_N | input | Hardware reset input, chip reset signal active LOW. |
| 36 | VCC18_MLRX | power_in | 1.8V power supply for the MIPI D-PHY receiver (MLRX). |
| 37 | MLRX_DA3N | input | MIPI D-PHY port-A data lane-3 negative input, uni-directional polarity swappable differential pair up to 1.5Gb/s. |
| 38 | MLRX_DA3P | input | MIPI D-PHY port-A data lane-3 positive input, uni-directional polarity swappable differential pair up to 1.5Gb/s. |
| 39 | VCC18_MLRX | power_in | 1.8V power supply for the MIPI D-PHY receiver (MLRX). |
| 40 | MLRX_DA2N | input | MIPI D-PHY port-A data lane-2 negative input, uni-directional polarity swappable differential pair up to 1.5Gb/s. |
| 41 | MLRX_DA2P | input | MIPI D-PHY port-A data lane-2 positive input, uni-directional polarity swappable differential pair up to 1.5Gb/s. |
| 42 | MLRX_DACN | input | MIPI D-PHY port-A data clock lane negative input, DDR clock differential pair up to 750Mb/s in quadrature phase with data signals. |
| 43 | MLRX_DACP | input | MIPI D-PHY port-A data clock lane positive input, DDR clock differential pair up to 750Mb/s in quadrature phase with data signals. |
| 44 | MLRX_DA1N | input | MIPI D-PHY port-A data lane-1 negative input, uni-directional polarity swappable differential pair up to 1.5Gb/s. |
| 45 | MLRX_DA1P | input | MIPI D-PHY port-A data lane-1 positive input, uni-directional polarity swappable differential pair up to 1.5Gb/s. |
| 46 | VCC18_MLRX | power_in | 1.8V power supply for the MIPI D-PHY receiver (MLRX). |
| 47 | MLRX_DA0N | input | MIPI D-PHY port-A data lane-0 negative input, uni-directional polarity swappable differential pair up to 1.5Gb/s. |
| 48 | MLRX_DA0P | input | MIPI D-PHY port-A data lane-0 positive input, uni-directional polarity swappable differential pair up to 1.5Gb/s. |
| 49 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | LONTIUM SEMICONDUCTOR |
| Package | QFN-48-EP(6x6) |
| Category | Communication Interface Chip/UART/485/232 |
| Pins | 49 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| 1.8V Power Supply Voltage | VCC18_MLRX, VCC18_ETX, VCC18_SPLL, VCC18_XTAL, VCC18_BGP, VDD | 1.62 | 1.8 | 1.98 | V | Normal operating conditions | 9 |
| 1.8V Power Supply Voltage | VCC18_MLRX, VCC18_ETX, VCC18_SPLL, VCC18_XTAL, VCC18_BGP, VDD | -0.3 | 2 | V | Absolute maximum | 9 | |
| CMOS Terminal Input Voltage Range | VI | -0.3 | 2 | V | 9 | ||
| CMOS Terminal Output Voltage Range | VO | -0.3 | 2 | V | 9 | ||
| Storage Temperature | TS | -55 | 125 | ℃ | 9 | ||
| Operating Free-air Temperature | TA | -40 | 27 | 85 | ℃ | 9 | |
| Power Supply Voltage Noise | VCCN | 50 | mV | 9 | |||
| Differential input high voltage threshold | VIDTH | 70 | mV | MIPI HS line receiver DC | 9 | ||
| Differential input low voltage threshold | VIDTL | -70 | mV | MIPI HS line receiver DC | 9 | ||
| Single ended input high voltage | VIHHS | 460 | mV | MIPI HS line receiver DC | 9 | ||
| Single ended input low voltage | VILHS | -40 | mV | MIPI HS line receiver DC | 9 | ||
| Input common mode voltage | VCMRXDC | 70 | 330 | mV | MIPI HS line receiver DC | 9 | |
| Differential input impedance | 80 | 125 | Ω | MIPI HS line receiver DC | 9 | ||
| Logic 0 input voltage, in ULP State | VIL-ULPS | 300 | mV | MIPI LP line receiver DC | 9 | ||
| Logic 0 input voltage, not in ULP State | VIL | 550 | mV | MIPI LP line receiver DC | 9 | ||
| Input high voltage | VIH | 880 | mV | MIPI LP line receiver DC | 9 | ||
| Input hysteresis | VHYST | 25 | mV | MIPI LP line receiver DC | 9 | ||
| Input low fault threshold | VILF | 200 | 450 | mV | MIPI contention line receiver DC | 10 | |
| TX DC Bias Voltage | Vbias_TX | 0 | 2 | V | eDP transmitter DC | 10 | |
| TX AC Common Mode Voltage | Vtx_ac_cm_hbr2 | 20 | mV rms | 10 | |||
| TX AC Common Mode Voltage | Vtx_ac_cm_hbr2 | 30 | mV rms | 10 | |||
| Differential Peak to Peak Output Swing Level0 | Vtx_diff_vpp_level0 | 0.34 | 0.4 | 0.46 | V | 10 | |
| Differential Peak to Peak Output Swing Level1 | Vtx_diff_vpp_level1 | 0.51 | 0.6 | 0.68 | V | 10 | |
| Differential Peak to Peak Output Swing Level2 | Vtx_diff_vpp_level2 | 0.69 | 0.8 | 0.92 | V | 10 | |
| Pre-emphasis level 0 | Vtx_pre_emp_ratio | 0 | 0 | 0 | dB | 10 | |
| Pre-emphasis level 1 | Vtx_pre_emp_ratio | 2.8 | 3.5 | 4.2 | dB | 10 | |
| Pre-emphasis level 2 | Vtx_pre_emp_ratio | 4.8 | 6 | 7.2 | dB | 10 | |
| Pre-emphasis level 3 | Vtx_pre_emp_ratio | 7.5 | 9.5 | 11.4 | dB | 10 | |
| Ctx AC couple capacitance | Ctx | 75 | 200 | nF | 10 | ||
| TX short circuit current limit | TX_SHORT | 50 | mA | 10 | |||
| Differential Impedance | RTX_DIFF | 80 | 100 | 120 | Ω | 10 | |
| Common mode interference beyond 450MHz | ΔVCMRX(HF) | 200 | mVpp | MIPI HS line receiver AC | 10 | ||
| Common mode interference between 50MHz and 450MHz | ΔVCMRX(LF) | -50 | 50 | mVpp | MIPI HS line receiver AC | 10 | |
| Common mode termination | Ccm | 60 | pF | MIPI HS line receiver AC | 10 | ||
| Termination Resister | Rterm | 80 | 100 | 125 | Ω | MIPI HS line receiver AC | 10 |
| Input pulse rejection | eSPIKE | 300 | V.ps | MIPI LP line receiver AC | 10 | ||
| Minimum pulse response | TMIN | 20 | ns | MIPI LP line receiver AC | 10 | ||
| Peak interference voltage | VINT | 200 | mV | MIPI LP line receiver AC | 10 | ||
| Interference frequency | fINT | 450 | MHz | MIPI LP line receiver AC | 10 | ||
| Minimum TX eye width at pkg pin | Ttx_eye_chip_HBR | 0.72 | UI | HBR | 10 | ||
| Maximum time between the jitter median and maximum deviation from the median at TX pkg pin | Ttx_jitter_HBR | 0.147 | UI | HBR | 10 | ||
| Minimum TX eye width at pkg pin | Ttx_eye_chip_RBR | 0.82 | UI | RBR | 10 | ||
| Maximum time between the jitter median and maximum deviation from the median at TX pkg pin | Ttx_jitter_RBR | 0.09 | UI | RBR | 10 | ||
| TX output rise and fall time at TX pkg pins | Ttx_rise_chip, Ttx_fall_chip | 50 | 130 | ps | D+/D- TX output | 11 | |
| Differential Return Loss at 0.675GHz at TX pkg pins | RL_TX_DIFF | 12 | dB | at 0.675GHz | 11 | ||
| Differential Return Loss at 1.35GHz at TX pkg pins | RL_TX_DIFF | 9 | dB | at 1.35GHz | 11 | ||
| Lane intra pair output skew at pkg pins | Ttx_skew | 20 | ps | 11 | |||
| Lane intra pair rise and fall time mismatch at pkg pins | Ttx_rise_fall | 5 | % | 11 |
CAD (KiCad official)
- Symbol:
LT8911EXB - Footprint:
Package_DFN_QFN:QFN-48-1EP_6x6mm_P0.4mm_EP4.2x4.2mm - 3D model: QFN-48-EP(6x6) (KiCad packages3D, STEP)
- 3D model files:
lt8911exb-etched.step/lt8911exb-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lt8911exb.step/lt8911exb.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: LONTIUM SEMICONDUCTOR datasheet, copy hosted by LCSC (14 pp, sha256
59db3d48fbfc4790, retrieved 2026-11-21) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).