3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownNCP5500DADJR2G
onsemi · Linear Voltage Regulators (LDO) · SOIC-8
NCP5500DADJR2G from onsemi, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Vin | power_in | Positive power supply input voltage; operating range is Vout + VDO or 2.5 V (whichever is higher) up to 16 V, with 18 V absolute maximum. |
| 2 | GND | power_in | Ground pin, one of four GND pins (2, 3, 6, 7) on the SOIC-8 package, internally connected to the heat sink. |
| 3 | GND | power_in | Ground pin, one of four GND pins (2, 3, 6, 7) on the SOIC-8 package, internally connected to the heat sink. |
| 4 | Vout | power_out | Regulated output voltage, up to 500 mA load current, adjustable from 1.25 V to 5.0 V in the adjustable version. |
| 5 | NC/ADJ | input | Voltage-adjust input for the adjustable output version (NCP5500DADJR2G is adjustable); use an external voltage divider to set the output voltage over 1.25 V to 5.0 V. |
| 6 | GND | power_in | Ground pin, one of four GND pins (2, 3, 6, 7) on the SOIC-8 package, internally connected to the heat sink. |
| 7 | GND | power_in | Ground pin, one of four GND pins (2, 3, 6, 7) on the SOIC-8 package, internally connected to the heat sink. |
| 8 | EN | input | Enable input for on/off control where a high level (above 2.0 V) turns on the output and below 0.4 V shuts it down; connect to Vin if not in use. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | SOIC-8 |
| Category | Power Supply Chip |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage, ADJ regulator (tolerance) | Vout | 1.189 | 1.25 | 1.311 | V | 1.0 mA < Iout < 500 mA | 4 |
| Output Voltage accuracy ADJ | Vout | -2.9 | 2.9 | % | TA = 25°C, Iout = 50 mA | 4 | |
| Line Regulation | REGLINE | -1 | 0.1 | 1 | % | Iout = 50 mA, 2.5 V or (Vout + 1.0 V) < Vin < 16 V | 4 |
| Load Regulation | REGLOAD | -1 | 0.35 | 1 | % | 1.0 mA < Iout < 500 mA | 4 |
| Dropout Voltage, Adjustable, 1 mA | VDO | 5 | 90 | mV | Iout = 1.0 mA, Vout = -2% | 4 | |
| Dropout Voltage, Adjustable, 500 mA | VDO | 230 | 700 | mV | Iout = 500 mA, Vout = -2% | 4 | |
| Ground Current, 100 uA | IGND | 300 | 500 | µA | Iout = 100 µA | 4 | |
| Ground Current, 500 mA | IGND | 10 | 20 | mA | Iout = 500 mA | 4 | |
| Disable Current in Shutdown, Adjustable | ISD | 30 | 50 | µA | Adjustable and 1.5 V versions | 4 | |
| Current Limit | Iout(LIM) | 500 | 700 | 900 | mA | Vout = 90% of Vout(nom) | 4 |
| Thermal Shutdown Temperature | TSD | 150 | 210 | °C | Iout = 100 µA | 4 | |
| Enable Voltage OFF | VENoff | 0.4 | V | OFF (shutdown) State | 4 | ||
| Enable Voltage ON | VENon | 2 | V | ON (enabled) State | 4 | ||
| Enable Pin Bias Current | IEN | 1 | µA | VEN = Vin, Iout = 1.0 mA | 4 | ||
| Adjust Pin Current | IADJ | 60 | nA | VEN = Vin, VADJ = 1.25 V, Vout = 1.25 V | 4 | ||
| Ripple Rejection 120 Hz | RR | 75 | dB | 120 Hz | 4 | ||
| Ripple Rejection 1 kHz | RR | 75 | dB | Iout = 100 mA, 1 kHz | 4 | ||
| Ripple Rejection 10 kHz | RR | 70 | dB | 10 kHz | 4 | ||
| Output Noise Voltage, 1 mA | Vn | 18 | µVrms | f = 10 Hz to 100 kHz, Vin = 2.5 V, Vout = 1.25 V, Iout = 1.0 mA | 4 | ||
| Output Noise Voltage, 100 mA | Vn | 35 | µVrms | f = 10 Hz to 100 kHz, Vin = 2.5 V, Vout = 1.25 V, Iout = 100 mA | 4 | ||
| Input Voltage | Vin | -0.3 | 18 | V | 3 | ||
| Output, Enable Voltage | Vout, EN | -0.3 | 16 | V | +16 V or Vin + 0.3 V, whichever is lower | 3 | |
| Maximum Junction Temperature | TJ | 150 | °C | 3 | |||
| Storage Temperature | TStg | -55 | 150 | °C | 3 | ||
| Lead Temperature Soldering Reflow | Tsld | 265 | °C | Peak, SMD, Pb-Free | 3 | ||
| ESD Human Body Model | ESDHBM | 4000 | V | 3 | |||
| ESD Machine Model | ESDMM | 200 | V | 3 | |||
| ESD Charged Device Model | ESDCDM | 1000 | V | 3 | |||
| Operating Input Voltage | Vin | 2.5 | 16 | V | Min is Vout + VDO or 2.5 V, whichever is higher | 3 | |
| Adjustable Output Voltage Range | Vout | 1.25 | 5 | V | Adjustable version only | 3 | |
| Operating Ambient Temperature Range | TA | -40 | 85 | °C | NCP5500 | 3 | |
| Thermal Resistance, Junction-to-Air | RθJA | 80 | °C/W | SOIC-8, 650 mm2 1 oz copper | 3 | ||
| Thermal Reference, Junction-to-Lead | RθJL | 22 | °C/W | SOIC-8 | 3 |
CAD (KiCad official)
- Symbol:
NCP5500DADJR2G - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
ncp5500dadjr2g-etched.step/ncp5500dadjr2g-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ncp5500dadjr2g.step/ncp5500dadjr2g.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: onsemi datasheet (15 pp, sha256
548cb365980b1c87, retrieved 2026-10-26, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).