main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers ncp5500dadjr2g: viewers rendered from the public page · Ray
ncp5500dadjr2g-etched.glb Publish 0.1.0 · Ray
ncp5500dadjr2g-etched.step ncp5500dadjr2g: factory component page (tier=mfr) · Ray
ncp5500dadjr2g-hero.glb ncp5500dadjr2g: hero GLB from the etched model (keeps the MPN mark) · Ray
ncp5500dadjr2g-hero.overlay.json Publish 0.1.0 · Ray
ncp5500dadjr2g.glb Publish 0.1.0 · Ray
ncp5500dadjr2g.kicad_mod Publish 0.1.0 · Ray
ncp5500dadjr2g.kicad_sym Publish 0.1.0 · Ray
ncp5500dadjr2g.lbr Publish 0.1.0 · Ray
ncp5500dadjr2g.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Publish 0.1.0 · Ray

NCP5500DADJR2G

onsemi · Linear Voltage Regulators (LDO) · SOIC-8

NCP5500DADJR2G from onsemi, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 Vin power_in Positive power supply input voltage; operating range is Vout + VDO or 2.5 V (whichever is higher) up to 16 V, with 18 V absolute maximum.
2 GND power_in Ground pin, one of four GND pins (2, 3, 6, 7) on the SOIC-8 package, internally connected to the heat sink.
3 GND power_in Ground pin, one of four GND pins (2, 3, 6, 7) on the SOIC-8 package, internally connected to the heat sink.
4 Vout power_out Regulated output voltage, up to 500 mA load current, adjustable from 1.25 V to 5.0 V in the adjustable version.
5 NC/ADJ input Voltage-adjust input for the adjustable output version (NCP5500DADJR2G is adjustable); use an external voltage divider to set the output voltage over 1.25 V to 5.0 V.
6 GND power_in Ground pin, one of four GND pins (2, 3, 6, 7) on the SOIC-8 package, internally connected to the heat sink.
7 GND power_in Ground pin, one of four GND pins (2, 3, 6, 7) on the SOIC-8 package, internally connected to the heat sink.
8 EN input Enable input for on/off control where a high level (above 2.0 V) turns on the output and below 0.4 V shuts it down; connect to Vin if not in use.

Key specifications

Parameter Value
Manufacturer onsemi
Package SOIC-8
Category Power Supply Chip
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Output Voltage, ADJ regulator (tolerance) Vout 1.189 1.25 1.311 V 1.0 mA < Iout < 500 mA 4
Output Voltage accuracy ADJ Vout -2.9 2.9 % TA = 25°C, Iout = 50 mA 4
Line Regulation REGLINE -1 0.1 1 % Iout = 50 mA, 2.5 V or (Vout + 1.0 V) < Vin < 16 V 4
Load Regulation REGLOAD -1 0.35 1 % 1.0 mA < Iout < 500 mA 4
Dropout Voltage, Adjustable, 1 mA VDO 5 90 mV Iout = 1.0 mA, Vout = -2% 4
Dropout Voltage, Adjustable, 500 mA VDO 230 700 mV Iout = 500 mA, Vout = -2% 4
Ground Current, 100 uA IGND 300 500 µA Iout = 100 µA 4
Ground Current, 500 mA IGND 10 20 mA Iout = 500 mA 4
Disable Current in Shutdown, Adjustable ISD 30 50 µA Adjustable and 1.5 V versions 4
Current Limit Iout(LIM) 500 700 900 mA Vout = 90% of Vout(nom) 4
Thermal Shutdown Temperature TSD 150 210 °C Iout = 100 µA 4
Enable Voltage OFF VENoff 0.4 V OFF (shutdown) State 4
Enable Voltage ON VENon 2 V ON (enabled) State 4
Enable Pin Bias Current IEN 1 µA VEN = Vin, Iout = 1.0 mA 4
Adjust Pin Current IADJ 60 nA VEN = Vin, VADJ = 1.25 V, Vout = 1.25 V 4
Ripple Rejection 120 Hz RR 75 dB 120 Hz 4
Ripple Rejection 1 kHz RR 75 dB Iout = 100 mA, 1 kHz 4
Ripple Rejection 10 kHz RR 70 dB 10 kHz 4
Output Noise Voltage, 1 mA Vn 18 µVrms f = 10 Hz to 100 kHz, Vin = 2.5 V, Vout = 1.25 V, Iout = 1.0 mA 4
Output Noise Voltage, 100 mA Vn 35 µVrms f = 10 Hz to 100 kHz, Vin = 2.5 V, Vout = 1.25 V, Iout = 100 mA 4
Input Voltage Vin -0.3 18 V 3
Output, Enable Voltage Vout, EN -0.3 16 V +16 V or Vin + 0.3 V, whichever is lower 3
Maximum Junction Temperature TJ 150 °C 3
Storage Temperature TStg -55 150 °C 3
Lead Temperature Soldering Reflow Tsld 265 °C Peak, SMD, Pb-Free 3
ESD Human Body Model ESDHBM 4000 V 3
ESD Machine Model ESDMM 200 V 3
ESD Charged Device Model ESDCDM 1000 V 3
Operating Input Voltage Vin 2.5 16 V Min is Vout + VDO or 2.5 V, whichever is higher 3
Adjustable Output Voltage Range Vout 1.25 5 V Adjustable version only 3
Operating Ambient Temperature Range TA -40 85 °C NCP5500 3
Thermal Resistance, Junction-to-Air RθJA 80 °C/W SOIC-8, 650 mm2 1 oz copper 3
Thermal Reference, Junction-to-Lead RθJL 22 °C/W SOIC-8 3

CAD (KiCad official)

  • Symbol: NCP5500DADJR2G
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: ncp5500dadjr2g-etched.step / ncp5500dadjr2g-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ncp5500dadjr2g.step / ncp5500dadjr2g.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: onsemi datasheet (15 pp, sha256 548cb365980b1c87, retrieved 2026-10-26, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF