main
Ray
Publish 0.1.1
6bf7bd7
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194
{
"slug": "ncp5500dadjr2g",
"version": "0.1.1",
"type": "component",
"description": "onsemi Linear Voltage Regulators (LDO), SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"tags": [
"component",
"power supply chip",
"ncp5500dadjr2g",
"factory-2.0.0",
"extractor-text"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"ncp5500dadjr2g.kicad_sym",
"ncp5500dadjr2g.kicad_mod",
"ncp5500dadjr2g.glb",
"ncp5500dadjr2g.step",
"ncp5500dadjr2g.lbr",
"docs/hero.png",
"docs/ncp5500dadjr2g-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"ncp5500dadjr2g-hero.glb",
"ncp5500dadjr2g-hero.overlay.json",
"ncp5500dadjr2g-etched.glb",
"ncp5500dadjr2g-etched.step"
],
"component": {
"mpn": "NCP5500DADJR2G",
"manufacturer": "onsemi",
"package": "SOIC-8",
"pin_count": 8,
"category": "Power Supply Chip",
"subcategory": "Linear Voltage Regulators (LDO)",
"datasheet": "https://www.onsemi.com/pdf/datasheet/ncp5500dadjr2-d.pdf",
"parts": {
"symbol": "ncp5500dadjr2g.kicad_sym",
"footprint": "ncp5500dadjr2g.kicad_mod",
"model_3d": "ncp5500dadjr2g-hero.glb",
"model_3d_plain": "ncp5500dadjr2g-etched.glb",
"model_3d_step": "ncp5500dadjr2g-etched.step",
"model_3d_step_plain": "ncp5500dadjr2g.step",
"lbr": "ncp5500dadjr2g.lbr"
},
"distributor_links": {
"lcsc": "C904515",
"digikey": "NCP5500DADJR2GOSTR-ND",
"mouser": "863-NCP5500DADJR2G"
},
"distributor_check": {
"checked_at": "2026-10-26T18:45:20Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": "NCP5500DADJR2GOSTR-ND",
"status": "found",
"lifecycle": "Active"
},
"mouser": {
"pn": "863-NCP5500DADJR2G",
"status": "found"
}
},
"pins": [
{
"number": "1",
"name": "Vin",
"type": "power_in",
"description": "Positive power supply input voltage; operating range is Vout + VDO or 2.5 V (whichever is higher) up to 16 V, with 18 V absolute maximum."
},
{
"number": "2",
"name": "GND",
"type": "power_in",
"description": "Ground pin, one of four GND pins (2, 3, 6, 7) on the SOIC-8 package, internally connected to the heat sink."
},
{
"number": "3",
"name": "GND",
"type": "power_in",
"description": "Ground pin, one of four GND pins (2, 3, 6, 7) on the SOIC-8 package, internally connected to the heat sink."
},
{
"number": "4",
"name": "Vout",
"type": "power_out",
"description": "Regulated output voltage, up to 500 mA load current, adjustable from 1.25 V to 5.0 V in the adjustable version."
},
{
"number": "5",
"name": "NC/ADJ",
"type": "input",
"description": "Voltage-adjust input for the adjustable output version (NCP5500DADJR2G is adjustable); use an external voltage divider to set the output voltage over 1.25 V to 5.0 V."
},
{
"number": "6",
"name": "GND",
"type": "power_in",
"description": "Ground pin, one of four GND pins (2, 3, 6, 7) on the SOIC-8 package, internally connected to the heat sink."
},
{
"number": "7",
"name": "GND",
"type": "power_in",
"description": "Ground pin, one of four GND pins (2, 3, 6, 7) on the SOIC-8 package, internally connected to the heat sink."
},
{
"number": "8",
"name": "EN",
"type": "input",
"description": "Enable input for on/off control where a high level (above 2.0 V) turns on the output and below 0.4 V shuts it down; connect to Vin if not in use."
}
],
"provenance": {
"extractor": "extract_pins 0.3",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.3",
"primary_model": "claude-sonnet-5-5",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [],
"pages_sent": 15,
"cost_usd": 0.1831,
"at": "2026-10-26T18:45:06"
},
"datasheet": {
"url": "https://www.onsemi.com/pdf/datasheet/ncp5500dadjr2-d.pdf",
"pages": 15,
"sha256": "548cb365980b1c87",
"source_tier": "mfr"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 8,
"described": 8,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "ncp5500dadjr2g.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
6.0,
4.9,
1.75
],
"zmin_mm": -0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",
"checked": "2026-10-26",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "ncp5500dadjr2g-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
6.0,
4.9,
1.75
],
"zmin_mm": -0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "0f244ed8ca387d1ecd35ec3a1488ae5e72bcf0ccb1b9eca2a921189e9737e086",
"checked": "2026-10-26",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
}
}