Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

MX25R4035FM1IL0

MXIC(Macronix) · Pre-ordered Products · SOP-8

MX25R4035FM1IL0 from MXIC(Macronix), in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 CS# input Chip Select input that enables the device when driven low.
2 SO/SIO1 bidirectional Serial Data Output (for 1xI/O) or Serial Data Input & Output (for 4xI/O read mode).
3 WP#/SIO2 bidirectional Write Protection (active low) or Serial Data Input & Output (for 4xI/O read mode); internal pull up applies when not physically connected.
4 GND power_in Ground.
5 SI/SIO0 bidirectional Serial Data Input (for 1xI/O) or Serial Data Input & Output (for 4xI/O read mode).
6 SCLK input Clock input.
7 RESET#/SIO3 bidirectional Hardware Reset pin, active low, or Serial Data Input & Output (for 4xI/O read mode); this part (M1IL0) has the RESET# option, with internal pull up when not physically connected.
8 VCC power_in Power supply, 1.65V-3.6V for read, erase and program operations.

Key specifications

Parameter Value
Manufacturer MXIC(Macronix)
Package SOP-8
Category Electronic Tools/Instruments/Consumables
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Ambient Operating Temperature (Industrial) -40 85 °C Industrial grade 64
Storage Temperature -65 150 °C 64
VCC to Ground Potential VCC -0.5 4 V MX25R (1.65V-3.6V) 64
Applied Input Voltage -0.5 V -0.5V to VCC+0.5V 64
Applied Output Voltage -0.5 V -0.5V to VCC+0.5V 64
Input Capacitance CIN 6 pF VIN = 0V, TA = 25°C, f = 1.0 MHz 64
Output Capacitance COUT 8 pF VOUT = 0V, TA = 25°C, f = 1.0 MHz 64
Input Load Current ILI -2 2 uA VCC = VCC Max, VIN = VCC or GND 66
Output Leakage Current ILO -2 2 uA VCC = VCC Max, VOUT = VCC or GND 66
VCC Standby Current ISB1 5 24 uA VIN = VCC or GND, CS# = VCC 66
Deep Power-down Current ISB2 0.007 0.35 uA VIN = VCC or GND, CS# = VCC 66
VCC Read Current (4x I/O) ICC1 2.8 4.5 mA f=16MHz (4x I/O), SCLK=0.1VCC/0.9VCC, SO=Open 66
VCC Read Current (33MHz) ICC1 2.2 4 mA f=33MHz, SCLK=0.1VCC/0.9VCC, SO=Open 66
VCC Read Current (2x I/O) ICC1 2.2 4 mA f=16MHz (2x I/O), SCLK=0.1VCC/0.9VCC, SO=Open 66
VCC Program Current (PP) ICC2 3.5 6 mA Program in Progress, CS# = VCC 66
VCC Write Status Register Current ICC3 3.1 6 mA Program status register in progress, CS#=VCC 66
VCC Sector/Block (64K) Erase Current ICC4 3.1 6 mA Erase in Progress, CS#=VCC 66
VCC Chip Erase Current ICC5 3.1 6 mA Erase in Progress, CS#=VCC 66
High Voltage Applied at WP# pin Vhv 7 8 V Test Condition, VCC=2.0V 66
Input Low Voltage VIL -0.5 V max is 0.2VCC 66
Output Low Voltage VOL 0.2 V IOL = 100uA 66
Operating Voltage VCC 1.65 3.6 V Read, Erase and Program Operations 4
Operating Temperature -40 85 °C Industrial 77
Clock Frequency (FAST_READ etc.) fSCLK 33 MHz Ultra Low Power Mode; FAST_READ, RDSFDP, PP, SE, BE32K, BE, CE, DP, RES, WREN, WRDI, RDID, RDSR, WRSR 68
Clock Frequency for READ fRSCLK 33 MHz Ultra Low Power Mode; READ instructions 68
Clock Frequency for 2READ/DREAD fTSCLK 16 MHz Ultra Low Power Mode 68
Clock Frequency for 4READ/QREAD fQ 16 MHz Ultra Low Power Mode 68
Clock Frequency for 4PP f4PP 33 MHz Ultra Low Power Mode 68
Clock High Time (Normal Read) tCH 13 ns Normal Read (fRSCLK) 68
Clock Low Time (Normal Read) tCL 13 ns Normal Read (fRSCLK) 68
Clock Rise Time (peak to peak) tCLCH 0.1 V/ns 68
CS# Active Setup Time tSLCH 5 ns relative to SCLK 68
CS# Not Active Hold Time tCHSL 5 ns relative to SCLK 68
Data In Setup Time tDVCH 2 ns 68
Data In Hold Time tCHDX 3 ns 68
CS# Active Hold Time tCHSH 5 ns relative to SCLK 68
CS# Not Active Setup Time tSHCH 5 ns relative to SCLK 68
CS# Deselect Time (Read to next Read) tSHSL 15 ns From Read to next Read 68
CS# Deselect Time (Write/Erase/Program to RDSR) tSHSL 30 ns From Write/Erase/Program to Read Status Register 68
Output Disable Time tSHQZ 8 ns 68
Clock Low to Output Valid (30pF) tCLQV 12 ns Loading: 30pF 68
Clock Low to Output Valid (15pF) tCLQV 10 ns Loading: 15pF 68
Output Hold Time tCLQX 0 ns 68
HOLD# Active Setup Time tHLCH 8 ns relative to SCLK 68
Write Protect Setup Time tWHSL 10 ns 68
Write Protect Hold Time tSHWL 10 ns 68
Write Status Register Cycle Time tW 10 30 ms Ultra Low Power Mode 68
Byte-Program Time tBP 40 100 us Ultra Low Power Mode 69
Page Program Cycle Time tPP 3.2 10 ms Ultra Low Power Mode 69
Sector Erase Cycle Time tSE 58 240 ms Ultra Low Power Mode 69
Block Erase (32KB) Cycle Time tBE32K 0.4 1.75 s Ultra Low Power Mode 69
Block Erase (64KB) Cycle Time tBE 0.8 3.5 s Ultra Low Power Mode 69
Chip Erase Cycle Time tCE 7.5 15 s Ultra Low Power Mode 69
Erase Suspend Latency tESL 60 us Ultra Low Power Mode 69
Program Suspend Latency tPSL 60 us Ultra Low Power Mode 69
CS# High to Deep Power-down Mode tDP 10 us 68
VCC Rise Time tVR 500000 us/V Sampled, not 100% tested 72
Erase/Program Cycle 100000 cycles Minimum 75
Latch-up Current -100 100 mA All pins except VCC, VCC = typical operation voltage, one pin at a time 76

CAD (KiCad official)

  • Symbol: MX25R4035FM1IL0
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOP-8 (KiCad packages3D, STEP)
  • 3D model files: mx25r4035fm1il0-etched.step / mx25r4035fm1il0-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mx25r4035fm1il0.step / mx25r4035fm1il0.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: MXIC(Macronix) datasheet (85 pp, sha256 ac115f6a8ed43b3d, retrieved 2026-10-23, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF