Generated by kicad-footprint-generator · KiCad file format 20260206
MX25R4035FM1IL0
MXIC(Macronix) · Pre-ordered Products · SOP-8
MX25R4035FM1IL0 from MXIC(Macronix), in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CS# | input | Chip Select input that enables the device when driven low. |
| 2 | SO/SIO1 | bidirectional | Serial Data Output (for 1xI/O) or Serial Data Input & Output (for 4xI/O read mode). |
| 3 | WP#/SIO2 | bidirectional | Write Protection (active low) or Serial Data Input & Output (for 4xI/O read mode); internal pull up applies when not physically connected. |
| 4 | GND | power_in | Ground. |
| 5 | SI/SIO0 | bidirectional | Serial Data Input (for 1xI/O) or Serial Data Input & Output (for 4xI/O read mode). |
| 6 | SCLK | input | Clock input. |
| 7 | RESET#/SIO3 | bidirectional | Hardware Reset pin, active low, or Serial Data Input & Output (for 4xI/O read mode); this part (M1IL0) has the RESET# option, with internal pull up when not physically connected. |
| 8 | VCC | power_in | Power supply, 1.65V-3.6V for read, erase and program operations. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | MXIC(Macronix) |
| Package | SOP-8 |
| Category | Electronic Tools/Instruments/Consumables |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Ambient Operating Temperature (Industrial) | -40 | 85 | °C | Industrial grade | 64 | ||
| Storage Temperature | -65 | 150 | °C | 64 | |||
| VCC to Ground Potential | VCC | -0.5 | 4 | V | MX25R (1.65V-3.6V) | 64 | |
| Applied Input Voltage | -0.5 | V | -0.5V to VCC+0.5V | 64 | |||
| Applied Output Voltage | -0.5 | V | -0.5V to VCC+0.5V | 64 | |||
| Input Capacitance | CIN | 6 | pF | VIN = 0V, TA = 25°C, f = 1.0 MHz | 64 | ||
| Output Capacitance | COUT | 8 | pF | VOUT = 0V, TA = 25°C, f = 1.0 MHz | 64 | ||
| Input Load Current | ILI | -2 | 2 | uA | VCC = VCC Max, VIN = VCC or GND | 66 | |
| Output Leakage Current | ILO | -2 | 2 | uA | VCC = VCC Max, VOUT = VCC or GND | 66 | |
| VCC Standby Current | ISB1 | 5 | 24 | uA | VIN = VCC or GND, CS# = VCC | 66 | |
| Deep Power-down Current | ISB2 | 0.007 | 0.35 | uA | VIN = VCC or GND, CS# = VCC | 66 | |
| VCC Read Current (4x I/O) | ICC1 | 2.8 | 4.5 | mA | f=16MHz (4x I/O), SCLK=0.1VCC/0.9VCC, SO=Open | 66 | |
| VCC Read Current (33MHz) | ICC1 | 2.2 | 4 | mA | f=33MHz, SCLK=0.1VCC/0.9VCC, SO=Open | 66 | |
| VCC Read Current (2x I/O) | ICC1 | 2.2 | 4 | mA | f=16MHz (2x I/O), SCLK=0.1VCC/0.9VCC, SO=Open | 66 | |
| VCC Program Current (PP) | ICC2 | 3.5 | 6 | mA | Program in Progress, CS# = VCC | 66 | |
| VCC Write Status Register Current | ICC3 | 3.1 | 6 | mA | Program status register in progress, CS#=VCC | 66 | |
| VCC Sector/Block (64K) Erase Current | ICC4 | 3.1 | 6 | mA | Erase in Progress, CS#=VCC | 66 | |
| VCC Chip Erase Current | ICC5 | 3.1 | 6 | mA | Erase in Progress, CS#=VCC | 66 | |
| High Voltage Applied at WP# pin | Vhv | 7 | 8 | V | Test Condition, VCC=2.0V | 66 | |
| Input Low Voltage | VIL | -0.5 | V | max is 0.2VCC | 66 | ||
| Output Low Voltage | VOL | 0.2 | V | IOL = 100uA | 66 | ||
| Operating Voltage | VCC | 1.65 | 3.6 | V | Read, Erase and Program Operations | 4 | |
| Operating Temperature | -40 | 85 | °C | Industrial | 77 | ||
| Clock Frequency (FAST_READ etc.) | fSCLK | 33 | MHz | Ultra Low Power Mode; FAST_READ, RDSFDP, PP, SE, BE32K, BE, CE, DP, RES, WREN, WRDI, RDID, RDSR, WRSR | 68 | ||
| Clock Frequency for READ | fRSCLK | 33 | MHz | Ultra Low Power Mode; READ instructions | 68 | ||
| Clock Frequency for 2READ/DREAD | fTSCLK | 16 | MHz | Ultra Low Power Mode | 68 | ||
| Clock Frequency for 4READ/QREAD | fQ | 16 | MHz | Ultra Low Power Mode | 68 | ||
| Clock Frequency for 4PP | f4PP | 33 | MHz | Ultra Low Power Mode | 68 | ||
| Clock High Time (Normal Read) | tCH | 13 | ns | Normal Read (fRSCLK) | 68 | ||
| Clock Low Time (Normal Read) | tCL | 13 | ns | Normal Read (fRSCLK) | 68 | ||
| Clock Rise Time (peak to peak) | tCLCH | 0.1 | V/ns | 68 | |||
| CS# Active Setup Time | tSLCH | 5 | ns | relative to SCLK | 68 | ||
| CS# Not Active Hold Time | tCHSL | 5 | ns | relative to SCLK | 68 | ||
| Data In Setup Time | tDVCH | 2 | ns | 68 | |||
| Data In Hold Time | tCHDX | 3 | ns | 68 | |||
| CS# Active Hold Time | tCHSH | 5 | ns | relative to SCLK | 68 | ||
| CS# Not Active Setup Time | tSHCH | 5 | ns | relative to SCLK | 68 | ||
| CS# Deselect Time (Read to next Read) | tSHSL | 15 | ns | From Read to next Read | 68 | ||
| CS# Deselect Time (Write/Erase/Program to RDSR) | tSHSL | 30 | ns | From Write/Erase/Program to Read Status Register | 68 | ||
| Output Disable Time | tSHQZ | 8 | ns | 68 | |||
| Clock Low to Output Valid (30pF) | tCLQV | 12 | ns | Loading: 30pF | 68 | ||
| Clock Low to Output Valid (15pF) | tCLQV | 10 | ns | Loading: 15pF | 68 | ||
| Output Hold Time | tCLQX | 0 | ns | 68 | |||
| HOLD# Active Setup Time | tHLCH | 8 | ns | relative to SCLK | 68 | ||
| Write Protect Setup Time | tWHSL | 10 | ns | 68 | |||
| Write Protect Hold Time | tSHWL | 10 | ns | 68 | |||
| Write Status Register Cycle Time | tW | 10 | 30 | ms | Ultra Low Power Mode | 68 | |
| Byte-Program Time | tBP | 40 | 100 | us | Ultra Low Power Mode | 69 | |
| Page Program Cycle Time | tPP | 3.2 | 10 | ms | Ultra Low Power Mode | 69 | |
| Sector Erase Cycle Time | tSE | 58 | 240 | ms | Ultra Low Power Mode | 69 | |
| Block Erase (32KB) Cycle Time | tBE32K | 0.4 | 1.75 | s | Ultra Low Power Mode | 69 | |
| Block Erase (64KB) Cycle Time | tBE | 0.8 | 3.5 | s | Ultra Low Power Mode | 69 | |
| Chip Erase Cycle Time | tCE | 7.5 | 15 | s | Ultra Low Power Mode | 69 | |
| Erase Suspend Latency | tESL | 60 | us | Ultra Low Power Mode | 69 | ||
| Program Suspend Latency | tPSL | 60 | us | Ultra Low Power Mode | 69 | ||
| CS# High to Deep Power-down Mode | tDP | 10 | us | 68 | |||
| VCC Rise Time | tVR | 500000 | us/V | Sampled, not 100% tested | 72 | ||
| Erase/Program Cycle | 100000 | cycles | Minimum | 75 | |||
| Latch-up Current | -100 | 100 | mA | All pins except VCC, VCC = typical operation voltage, one pin at a time | 76 |
CAD (KiCad official)
- Symbol:
MX25R4035FM1IL0 - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
mx25r4035fm1il0-etched.step/mx25r4035fm1il0-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mx25r4035fm1il0.step/mx25r4035fm1il0.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: MXIC(Macronix) datasheet (85 pp, sha256
ac115f6a8ed43b3d, retrieved 2026-10-23, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).