Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

HX65LBC176-S

ZHHXDZ · RS-485 / RS-422 ICs · SOP-8

HX65LBC176-S from ZHHXDZ, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 RO output Receiver data output: RO is high when A-B is -50 mV or more positive (VTH) and low when A-B is -200 mV or less, and it is high for an open or shorted receiver input (fail-safe).
2 RE input Receiver enable input, active low: with RE low the receiver is enabled, and with RE high and DE low the receiver output is high-impedance (OCR of the datasheet text is partly garbled, so confirm the exact behavior).
3 DE input Driver enable input, active high: DE high enables the driver (transmit state), and DE low puts the driver output into high-impedance (receive state) when RE is high.
4 DI input Driver data input: with DE high, a high DI drives A high and B low, and a low DI drives A low and B high.
5 GND power_in Ground reference for the device; all voltages are referenced to ground.
6 A bidirectional Driver differential output (non-inverting) and receiver differential input; the bus common-mode range is -7 V to +12 V and the A/B pins have ±15 kV HBM ESD protection.
7 B bidirectional Driver differential output (inverting) and receiver differential input; the bus common-mode range is -7 V to +12 V and the A/B pins have ±15 kV HBM ESD protection.
8 VCC power_in Supply voltage: 4.5 V to 5.5 V (5 V ±5%) for normal operation, with an absolute maximum of +6.0 V.

Key specifications

Parameter Value
Manufacturer ZHHXDZ
Package SOP-8
Category Interface
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Working voltage range Vcc 4.5 5.5 V 2
Supply voltage VCC 6 V 2
Control input voltage DE,RE 6 V 2
Drive input voltage DI 6 V 2
Drive output voltage/receive input voltage A,B -7 12 V 2
Storage temperature range TSTG -55 150 ℃ 2
Operating temperature range TOP -40 85 ℃ 2
Maximum operating temperature range TMOP -55 125 ℃ 2
Power dissipation PD 470 mW 2
Solder temperature TL 300 ℃ Solder temperature (10 seconds) 2
Driver differential output (no load) VOD1 5 V 2
Driver differential output (with load) VOD2 1.5 V R=54Ω or R=27Ω, Figure 1 2
Change in differential output when DI changes ∆VOD 0.2 V 2
Driver common mode output voltage VOC 1 3 V 2
Change in common mode output when DI changes ∆VOC 0.2 V 2
Input high voltage VIH 2 V 2
Input low voltage VIL 0.8 V 2
Input current (DE,RE,DI) IIN1 -2 2 uA 2
Input current (A,B) IIN2 40 90 uA DE=0V, Vcc=5V, VIN=5V 2
Input current (A,B) IIN2 60 100 uA DE=0V, Vcc=5V, VIN=0V 2
Receiver differential input threshold voltage VTH -200 -50 mV -7V ≤VCM≤+12V 2
Receiver threshold voltage change ∆VTH 25 mV 2
Receiver output high level VOH 4 V IO=-8mA 2
Receiver output low level VOL 0.4 V IO=8mA 2
Receiver output leakage (tri-state) IOZR 1 uA 0.4V ≤Vo≤2.4V 2
No load operating current ICC 480 600 uA -7V ≤VCM≤+12V, RE=DI=GND or DE=Vcc 2
No load operating current (DE=GND) ICC 450 600 uA DE=GND 2
Receiver output short-circuit current IOSR 95 mA 0V ≤VRO≤ 2
ESD protection (A/B) -15 15 kV Between A/B, human body mode 2
Driver input to output tDPLH 250 1000 nS RDIFF=50Ω, CL1=CL2=100pF, Figure 3,5 2
Driver output offset /tDPLH, tDPHL/ tDSKEW -100 100 nS 2
Driver enables high output tDZH 2500 nS CL=100pF, Figure 4,6, S2 closed 2
Driver enables output to be low tDZL 2500 nS CL=100pF, Figure 4,6, S1 closed 2
Drive from low to off tDLZ 100 nS CL=15pF, Figure 4,6, S1 closed 2
Drive from high to off tDHZ 100 nS CL=15pF, Figure 4,6, S2 closed 2
Receiver input to output (rising) tRPLH 200 nS /VID/ ≥2.0V; rising and falling time ≤15nS, Figure 7,9 2
Receiver input to output (falling) tRPHL 200 nS /VID/ ≥2.0V; rising and falling time ≤15nS, Figure 7,9 2
Receiver skew /tRPLH - tRPHL/ tRSKEW -30 30 nS 2
Receiver enable to output low tRZL 20 50 nS CL=100pF, Figure 2,8 2
Receiver enable to output high tRZH 20 50 nS CL=100pF, Figure 2,8 2
Receiver from low to off tRLZ 20 50 nS CL=100pF, Figure 2,8 2
Receiver from high to off tRHZ 20 50 nS CL=100pF, Figure 2,8 2
Maximum data speed fMAX 250 500 Mbps 3
Driver output short-circuit current IOD 100 mA Short circuit current between A/B 2

CAD (KiCad official)

  • Symbol: HX65LBC176-S
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOP-8 (KiCad packages3D, STEP)
  • 3D model files: hx65lbc176-s-etched.step / hx65lbc176-s-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); hx65lbc176-s.step / hx65lbc176-s.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: ZHHXDZ datasheet (4 pp, sha256 a8a8350a6e06e785, retrieved 2026-11-04, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF