Generated by kicad-footprint-generator · KiCad file format 20260206
HX65LBC176-S
ZHHXDZ · RS-485 / RS-422 ICs · SOP-8
HX65LBC176-S from ZHHXDZ, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RO | output | Receiver data output: RO is high when A-B is -50 mV or more positive (VTH) and low when A-B is -200 mV or less, and it is high for an open or shorted receiver input (fail-safe). |
| 2 | RE | input | Receiver enable input, active low: with RE low the receiver is enabled, and with RE high and DE low the receiver output is high-impedance (OCR of the datasheet text is partly garbled, so confirm the exact behavior). |
| 3 | DE | input | Driver enable input, active high: DE high enables the driver (transmit state), and DE low puts the driver output into high-impedance (receive state) when RE is high. |
| 4 | DI | input | Driver data input: with DE high, a high DI drives A high and B low, and a low DI drives A low and B high. |
| 5 | GND | power_in | Ground reference for the device; all voltages are referenced to ground. |
| 6 | A | bidirectional | Driver differential output (non-inverting) and receiver differential input; the bus common-mode range is -7 V to +12 V and the A/B pins have ±15 kV HBM ESD protection. |
| 7 | B | bidirectional | Driver differential output (inverting) and receiver differential input; the bus common-mode range is -7 V to +12 V and the A/B pins have ±15 kV HBM ESD protection. |
| 8 | VCC | power_in | Supply voltage: 4.5 V to 5.5 V (5 V ±5%) for normal operation, with an absolute maximum of +6.0 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | ZHHXDZ |
| Package | SOP-8 |
| Category | Interface |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Working voltage range | Vcc | 4.5 | 5.5 | V | 2 | ||
| Supply voltage | VCC | 6 | V | 2 | |||
| Control input voltage | DE,RE | 6 | V | 2 | |||
| Drive input voltage | DI | 6 | V | 2 | |||
| Drive output voltage/receive input voltage | A,B | -7 | 12 | V | 2 | ||
| Storage temperature range | TSTG | -55 | 150 | ℃ | 2 | ||
| Operating temperature range | TOP | -40 | 85 | ℃ | 2 | ||
| Maximum operating temperature range | TMOP | -55 | 125 | ℃ | 2 | ||
| Power dissipation | PD | 470 | mW | 2 | |||
| Solder temperature | TL | 300 | ℃ | Solder temperature (10 seconds) | 2 | ||
| Driver differential output (no load) | VOD1 | 5 | V | 2 | |||
| Driver differential output (with load) | VOD2 | 1.5 | V | R=54Ω or R=27Ω, Figure 1 | 2 | ||
| Change in differential output when DI changes | ∆VOD | 0.2 | V | 2 | |||
| Driver common mode output voltage | VOC | 1 | 3 | V | 2 | ||
| Change in common mode output when DI changes | ∆VOC | 0.2 | V | 2 | |||
| Input high voltage | VIH | 2 | V | 2 | |||
| Input low voltage | VIL | 0.8 | V | 2 | |||
| Input current (DE,RE,DI) | IIN1 | -2 | 2 | uA | 2 | ||
| Input current (A,B) | IIN2 | 40 | 90 | uA | DE=0V, Vcc=5V, VIN=5V | 2 | |
| Input current (A,B) | IIN2 | 60 | 100 | uA | DE=0V, Vcc=5V, VIN=0V | 2 | |
| Receiver differential input threshold voltage | VTH | -200 | -50 | mV | -7V ≤VCM≤+12V | 2 | |
| Receiver threshold voltage change | ∆VTH | 25 | mV | 2 | |||
| Receiver output high level | VOH | 4 | V | IO=-8mA | 2 | ||
| Receiver output low level | VOL | 0.4 | V | IO=8mA | 2 | ||
| Receiver output leakage (tri-state) | IOZR | 1 | uA | 0.4V ≤Vo≤2.4V | 2 | ||
| No load operating current | ICC | 480 | 600 | uA | -7V ≤VCM≤+12V, RE=DI=GND or DE=Vcc | 2 | |
| No load operating current (DE=GND) | ICC | 450 | 600 | uA | DE=GND | 2 | |
| Receiver output short-circuit current | IOSR | 95 | mA | 0V ≤VRO≤ | 2 | ||
| ESD protection (A/B) | -15 | 15 | kV | Between A/B, human body mode | 2 | ||
| Driver input to output | tDPLH | 250 | 1000 | nS | RDIFF=50Ω, CL1=CL2=100pF, Figure 3,5 | 2 | |
| Driver output offset /tDPLH, tDPHL/ | tDSKEW | -100 | 100 | nS | 2 | ||
| Driver enables high output | tDZH | 2500 | nS | CL=100pF, Figure 4,6, S2 closed | 2 | ||
| Driver enables output to be low | tDZL | 2500 | nS | CL=100pF, Figure 4,6, S1 closed | 2 | ||
| Drive from low to off | tDLZ | 100 | nS | CL=15pF, Figure 4,6, S1 closed | 2 | ||
| Drive from high to off | tDHZ | 100 | nS | CL=15pF, Figure 4,6, S2 closed | 2 | ||
| Receiver input to output (rising) | tRPLH | 200 | nS | /VID/ ≥2.0V; rising and falling time ≤15nS, Figure 7,9 | 2 | ||
| Receiver input to output (falling) | tRPHL | 200 | nS | /VID/ ≥2.0V; rising and falling time ≤15nS, Figure 7,9 | 2 | ||
| Receiver skew /tRPLH - tRPHL/ | tRSKEW | -30 | 30 | nS | 2 | ||
| Receiver enable to output low | tRZL | 20 | 50 | nS | CL=100pF, Figure 2,8 | 2 | |
| Receiver enable to output high | tRZH | 20 | 50 | nS | CL=100pF, Figure 2,8 | 2 | |
| Receiver from low to off | tRLZ | 20 | 50 | nS | CL=100pF, Figure 2,8 | 2 | |
| Receiver from high to off | tRHZ | 20 | 50 | nS | CL=100pF, Figure 2,8 | 2 | |
| Maximum data speed | fMAX | 250 | 500 | Mbps | 3 | ||
| Driver output short-circuit current | IOD | 100 | mA | Short circuit current between A/B | 2 |
CAD (KiCad official)
- Symbol:
HX65LBC176-S - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
hx65lbc176-s-etched.step/hx65lbc176-s-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);hx65lbc176-s.step/hx65lbc176-s.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: ZHHXDZ datasheet (4 pp, sha256
a8a8350a6e06e785, retrieved 2026-11-04, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).