Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

UCC12040DVER

Texas Instruments · DC-DC Converters · SOIC-16-300mil

UCC12040DVER from Texas Instruments, in a SOIC-16-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 EN input Enable pin; forcing EN low disables the device, pull high to enable normal device functionality.
2 GNDP power_in Power ground return connection for VINP.
3 VINP power_in Primary side input supply voltage pin; 4.5 V to 5.5 V operating range with 10-μF ceramic capacitor to GNDP required.
4 SYNC input Synchronous clock input pin; external clock range 14.4 MHz to 17.6 MHz or connect to GNDP for standalone internal oscillator operation.
5 SYNC_OK output Active-low open-drain diagnostic output asserted LOW when external SYNC clock is absent or outside operating range.
6 NC unconnected Internally connected pin for primary-side voltage domain; connect to GNDP on printed circuit board.
7 NC unconnected Internally connected pin for primary-side voltage domain; connect to GNDP on printed circuit board.
8 NC unconnected Internally connected pin for primary-side voltage domain; connect to GNDP on printed circuit board.
9 GNDS power_in Connect to GNDS plane on printed circuit board; ensure pin 15 is connected to circuit ground and do not use as only ground connection for VISO.
10 NC unconnected No internal connection pin for isolated voltage domain; connect to GNDS on printed circuit board.
11 NC unconnected No internal connection pin for isolated voltage domain; connect to GNDS on printed circuit board.
12 NC unconnected No internal connection pin for isolated voltage domain; connect to GNDS on printed circuit board.
13 SEL input VISO selection pin determining output voltage: 5.0 V (shorted to VISO), 5.4 V (100 kΩ to VISO), 3.3 V (shorted to GNDS), or 3.7 V (100 kΩ to GNDS).
14 VISO power_out Isolated supply voltage output pin (3.3 V to 5.4 V selectable) with 10-μF ceramic capacitor to GNDS on pin 15 required.
15 GNDS power_in Secondary side ground return connection for VISO; connect bypass capacitor from VISO to this pin.
16 GNDS power_in Connect to GNDS plane on printed circuit board; ensure pin 15 is connected to circuit ground and do not use as only ground connection for VISO.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOIC-16-300mil
Category Power Management (PMIC)
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
VINP to GNDP VINP -0.3 6 V over operating free-air temperature range (unless otherwise noted) 4
EN, SYNC, SYNC_OK to GNDP -0.3 V over operating free-air temperature range (unless otherwise noted) 4
VISO to GNDS VISO -0.3 6 V over operating free-air temperature range (unless otherwise noted) 4
SEL to GNDS -0.3 V over operating free-air temperature range (unless otherwise noted) 4
VISO output power at Ta = 25°C POUT_MAX 675 mW Ta = 25°C 4
Operating junction temperature range TJ -40 150 °C 4
Storage temperature Tstg -65 150 °C 4
VINP Primary side supply voltage VINP 4.5 5 5.5 V over operating free-air temperature range (unless otherwise noted) 4
EN pin input voltage VEN 0 5.5 V 4
SYNC pin input voltage VSYNC 0 5.5 V 4
SYNC_OK pen drain pin voltage VSYNC-OK 0 5.5 V 4
Isolated power supply voltage VISO 0 5.7 V 4
Input voltage VSEL 0 5.7 V 4
External DC/DC converter synchronization signal frequency fSYNC 14.4 16 17.6 MHz 4
VISO output power at Ta = 25°C PVISO 500 mW Ta = 25°C 4
Ambient temperature Ta -40 125 °C 4
Junction temperature TJ -40 150 °C 4
VINP quiescent current, disabled IVINQ 100 uA EN=LOW 7
VINP operating current, no load IVINO 50 mA EN=HI; SEL shorted to VISO (5.0V output) 7
VINP operating current, no load IVINO 45 mA EN=HI; SEL 100kΩ to VISO (5.4V output) 7
VINP operating current, no load IVINO 90 mA EN=HI; SEL shorted to GNDS (3.3V output) 7
VINP operating current, no load IVINO 80 mA EN=HI; SEL 100kΩ to GNDS (3.7V output) 7
DC current from VINP supply under short circuit on VISO IVIN_SC 245 mA VISO short to GNDS 7
Enable Pin Input Current IEN 5 10 uA VEN = 5.0 V 7
SYNC Pin Input Current ISYNC 0.02 1 uA VSYNC = 5.0 V 7
SYNC_OK output low voltage VOL 0.15 V ISYNC_OK = - 2 mA 7
SYNC_OK pin leakage current ILKG_SYNC_OK 1 uA VSYNC_OK = 5.0 V 7
Isolated supply output voltage VISO 4.7 5 5.3 V SEL shorted to VISO (5.0V output); IISO = 55 mA (2) 7
Isolated supply output voltage VISO 5.1 5.4 5.7 V SEL 100kΩ to VISO (5.4 V output); IISO = 45 mA (2) 7
Isolated supply output voltage VISO 3.1 3.3 3.5 V SEL shorted to GNDS (3.3V output); IISO = 100 mA (2) 7
Isolated supply output voltage VISO 3.5 3.7 3.9 V SEL 100kΩ to GNDS (3.7 V output); IISO = 90 mA (2) 7
Voltage ripple on isolated supply output (pk-pk) VISO(RIP) 50 mV 20-MHz bandwidth, CLOAD = 10 uF // 0.1 uF, SEL shorted to VISO (5.0V output); IISO = 100 mA 7
Rise time, 10% - 90% tRISE 750 µs EN = change from LO to HI, SEL shorted to VISO (5.0V output); IISO = 1 mA 8
Rise time, 10% - 90% tRISE 300 µs EN = change from LO to HI, SEL 100kΩ to GNDS (3.3V output); IISO = 1 mA 8
DC/DC Converter Clock fSW_INT 7.2 8 8.8 MHz Internal clock mode 8
VINP under-voltage lockout rising threshold VUVPR 4.2 V 7
VINP under-voltage lockout falling threshold VUVPF 3.7 V 7
VINP under-voltage lockout hysteresis VUVPH 0.5 V 7
Input voltage threshold, logic HIGH VIR 2.2 V Rising edge 7
Input voltage threshold, logic LOW VIF 0.8 V Falling edge 7
Isolated voltage ripple load regulation: VISO DC line regulation VISO(LINE) 1 % SEL shorted to VISO (5.0 V output); IISO = 50 mA, VINP = 4.5 V to 5.5 V 7
VISO DC line regulation VISO(LINE) 1 % SEL shorted to GNDS (3.3 V output); IISO = 75 mA, VINP = 4.5 V to 5.5 V 7
VISO DC load regulation VISO(LOAD) 1.5 % SEL shorted to VISO (5.0 V output); IISO = 0 to 100 mA 8
Efficiency at maximum recommended load EFF 60 % SEL shorted to VISO (5.0 V output); IISO = 100 mA 8
Efficiency at maximum recommended load EFF 50 % SEL shorted to GNDS (3.3V output); IISO = 145 mA 8
Efficiency at maximum recommended load EFF 53 % SEL 100kΩ to GNDS (3.7V output); IISO = 130 mA 8
Thermal shutdown threshold TSDTHR 165 °C Junction Temperature, Rising 8
Thermal shutdown hysteresis TSDHYST 27 °C Junction Temperature, Falling 8
Static common-mode transient immunity CMTI 100 V/ns Slew Rate of GNDP versus GNDS, VCM = 1000 V 8
Junction-to-ambient thermal resistance RθJA 63.8 °C/W 4
Junction-to-case (top) thermal resistance RθJC(top) 21.4 °C/W 4
Junction-to-board thermal resistance RθJB 38.5 °C/W 4
Junction-to-top characterization parameter ψJT 10.2 °C/W 4
Junction-to-board characterization parameter ψJB 37.2 °C/W 4

CAD (KiCad official)

  • Symbol: UCC12040DVER
  • Footprint: Package_SO:SOIC-16_3.9x9.9mm_P1.27mm
  • 3D model: SOIC-16-300mil (KiCad packages3D, STEP)
  • 3D model files: ucc12040dver-etched.step / ucc12040dver-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ucc12040dver.step / ucc12040dver.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (36 pp, sha256 db9973072db483b2, retrieved 2026-09-26, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-4-6 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF