Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

MKL04Z32VFK4

NXP Semicon · Pre-ordered MCUs · QFN-24-EP(4x4)

MKL04Z32VFK4 from NXP Semicon, in a QFN-24-EP(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 PTB6/IRQ_2/LPTMR0_ALT3 bidirectional Default function is DISABLED; as GPIO PTB6 it is selected on ALT1 with IRQ_2/LPTMR0_ALT3, TPM0_CH3 on ALT2 and TPM_CLKIN1 on ALT3.
2 PTB7/IRQ_3 bidirectional Default function is DISABLED; as GPIO PTB7 it is selected on ALT1 with IRQ_3 and TPM0_CH2 on ALT2.
3 VDD / VREFH power_in VDD is the supply, with an operating voltage range of 1.71 to 3.6 V; VREFH is the high reference voltage, for which the text gives no numeric limits. The 24-QFN column assigns this pin number to both signals, see review_required.
4 VREFL / VSS power_in VREFL is the low reference voltage and VSS is ground; the text gives no numeric limits for either. The 24-QFN column assigns this pin number to both signals, see review_required.
5 PTA3 input Default function is EXTAL0, the crystal oscillator input; as GPIO PTA3 it is selected on ALT1, with I2C0_SCL on ALT2 and I2C0_SDA on ALT3.
6 PTA4/LLWU_P0 output Default function is XTAL0, the crystal oscillator output; as GPIO PTA4/LLWU_P0 it is selected on ALT1, with I2C0_SDA on ALT2 and I2C0_SCL on ALT3.
7 PTA5/LLWU_P1/RTC_CLK_IN bidirectional Default function is DISABLED; as GPIO PTA5 it is selected on ALT1 with LLWU_P1 and RTC_CLK_IN, TPM0_CH5 on ALT2 and SPI0_SS_b on ALT3.
8 PTA6/LLWU_P2 bidirectional Default function is DISABLED; as GPIO PTA6 it is selected on ALT1 with LLWU_P2, TPM0_CH4 on ALT2 and SPI0_MISO on ALT3.
9 PTB10 bidirectional Default function is ADC0_SE9; as GPIO PTB10 it is selected on ALT1 and TPM0_CH1 is on ALT2.
10 PTB11 bidirectional Default function is ADC0_SE8; as GPIO PTB11 it is selected on ALT1 and TPM0_CH0 is on ALT2.
11 PTA7/IRQ_7/LLWU_P3 bidirectional Default function is ADC0_SE7; as GPIO PTA7 it is selected on ALT1 with IRQ_7 and LLWU_P3, SPI0_MISO on ALT2 and SPI0_MOSI on ALT3.
12 PTB0/IRQ_8/LLWU_P4 bidirectional Default function is ADC0_SE6; as GPIO PTB0 it is selected on ALT1 with IRQ_8 and LLWU_P4, EXTRG_IN on ALT2 and SPI0_SCK on ALT3.
13 PTB1/IRQ_9 bidirectional Default function is ADC0_SE5/CMP0_IN3; as GPIO PTB1 it is selected on ALT1 with IRQ_9, UART0_TX on ALT2 and UART0_RX on ALT3.
14 PTB2/IRQ_10/LLWU_P5 bidirectional Default function is ADC0_SE4; as GPIO PTB2 it is selected on ALT1 with IRQ_10 and LLWU_P5, UART0_RX on ALT2 and UART0_TX on ALT3.
15 PTA8 bidirectional Default function is ADC0_SE3; as GPIO PTA8 it is selected on ALT1 and no other alternate function is listed.
16 PTA9 bidirectional Default function is ADC0_SE2; as GPIO PTA9 it is selected on ALT1 and no other alternate function is listed.
17 PTB3/IRQ_14 bidirectional Default function is DISABLED; as GPIO PTB3 it is selected on ALT1 with IRQ_14, I2C0_SCL on ALT2 and UART0_TX on ALT3.
18 PTB4/IRQ_15/LLWU_P6 bidirectional Default function is DISABLED; as GPIO PTB4 it is selected on ALT1 with IRQ_15 and LLWU_P6, I2C0_SDA on ALT2 and UART0_RX on ALT3.
19 PTB5/IRQ_16 input Default function is NMI_b (non-maskable interrupt input); as GPIO PTB5 it is selected on ALT1 with IRQ_16, TPM1_CH1 is on ALT2 and ADC0_SE1/CMP0_IN1 is on ALT0.
20 PTA12/IRQ_17/LPTMR0_ALT2 bidirectional Default function is ADC0_SE0/CMP0_IN0; as GPIO PTA12 it is selected on ALT1 with IRQ_17 and LPTMR0_ALT2, TPM1_CH0 on ALT2 and TPM_CLKIN0 on ALT3.
21 PTB13 bidirectional Default function is ADC0_SE13; as GPIO PTB13 it is selected on ALT1, TPM1_CH1 is on ALT2 and RTC_CLKOUT is on ALT3.
22 PTA0/IRQ_0/LLWU_P7 input Default function is SWD_CLK, the serial wire debug clock; as GPIO PTA0 it is selected on ALT1 with IRQ_0 and LLWU_P7, TPM1_CH0 on ALT2 and ADC0_SE12/CMP0_IN2 on ALT0.
23 PTA1/IRQ_1/LPTMR0_ALT1 input Default function is RESET_b; as GPIO PTA1 it is selected on ALT1 with IRQ_1 and LPTMR0_ALT1, and TPM_CLKIN0 is on ALT2 and RESET_b on ALT3.
24 PTA2 bidirectional Default function is SWD_DIO, the serial wire debug data pin; as GPIO PTA2 it is selected on ALT1 and CMP0_OUT is on ALT2.
25 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer NXP Semicon
Package QFN-24-EP(4x4)
Category Embedded Processors & Controllers
Pins 25

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Storage temperature TSTG -55 150 °C 4
Solder temperature, lead-free TSDR 260 °C 4
Electrostatic discharge voltage, human body model VHBM -2000 2000 V 4
Electrostatic discharge voltage, charged-device model VCDM -500 500 V 4
Latch-up current ILAT -100 100 mA Ambient temperature 105 °C 4
Digital supply voltage VDD -0.3 3.8 V 5
Digital supply current IDD 120 mA 5
Instantaneous maximum current single pin limit (applies to all port pins) ID -25 25 mA 5
Supply voltage VDD 1.71 3.6 V 6
Analog supply voltage VDDA 1.71 3.6 V 6
VDD-to-VDDA differential voltage VDD, VDDA -0.1 0.1 V 6
VSS-to-VSSA differential voltage VSS, VSSA -0.1 0.1 V 6
IO pin negative/positive DC injection current, single pin IICIO -3 3 mA VIN < VSS-0.3V 6
Contiguous pin DC injection current, regional limit IICcont -25 25 mA Sum of 16 contiguous pins 6
VDD voltage required to retain RAM VRAM 1.2 V 6
Temperature range (ambient) -40 105 °C 1
Falling VDD POR detect voltage VPOR 0.8 1.1 1.5 V 6
Falling low-voltage detect threshold, high range VLVDH 2.48 2.56 2.64 V LVDV = 01 6
Input capacitance CIN 7 pF 16
System and core clock fSYS 48 MHz Normal run mode 16
Bus clock fBUS 24 MHz Normal run mode 16
Flash clock fFLASH 24 MHz Normal run mode 16
LPTMR clock fLPTMR 24 MHz Normal run mode 16
System and core clock fSYS 4 MHz VLPR and VLPS modes 16
Oscillator crystal or resonator frequency, low-frequency mode fosc_lo 32 40 kHz MCG_C2[RANGE]=00 23
Oscillator crystal or resonator frequency, high-frequency mode (low range) fosc_hi_1 3 8 MHz MCG_C2[RANGE]=01 23
Oscillator crystal or resonator frequency, high frequency mode (high range) fosc_hi_2 8 32 MHz MCG_C2[RANGE]=1x 23
Input clock frequency (external clock mode) fec_extal 48 MHz External clock mode 23
Input clock duty cycle (external clock mode) tdc_extal 40 50 60 % External clock mode 23
Longword Program high-voltage time thvpgm4 7.5 18 μs 24
Sector Erase high-voltage time thversscr 13 113 ms 24
Erase All high-voltage time thversall 52 452 ms 24
Program Longword execution time tpgm4 65 145 μs 24
Erase Flash Sector execution time tersscr 14 114 ms 24
Read 1s All Blocks execution time trd1all 0.5 ms 24
Erase All Blocks execution time tersall 61 500 ms 24
Average current adder during high voltage flash programming operation IDD_PGM 2.5 6 mA 24
Average current adder during high voltage flash erase operation IDD_ERS 1.5 4 mA 24
Data retention after up to 10 K cycles tnvmretp10k 5 50 years 25
Data retention after up to 1 K cycles tnvmretp1k 20 100 years 25
Cycling endurance nnvmcycp 10 50 K cycles -40 °C ≤ Tj ≤ 125 °C 25
Supply voltage (ADC, absolute) VDDA 1.71 3.6 V Absolute 25
Supply voltage delta to VDD (VDD, VDDA) ΔVDDA -100 0 100 mV 25
Ground voltage delta to VSS (VSS, VSSA) ΔVSSA -100 0 100 mV 25
ADC reference voltage high VREFH 1.13 V 25
ADC conversion clock frequency fADCK 1 18 MHz ≤ 12-bit mode 26
ADC conversion rate Crate 20 818.33 Ksps ≤ 12-bit modes; no ADC hardware averaging; continuous conversions enabled 26
ADC supply current IDDA_ADC 0.215 1.7 mA 27
Total unadjusted error (12-bit modes) TUE -6.8 4 6.8 LSB 12-bit modes 27
Differential non-linearity (12-bit modes) DNL -1.1 0.7 1.9 LSB 12-bit modes 27
Integral non-linearity (12-bit modes) INL -2.7 1 1.9 LSB 12-bit modes 27
Full-scale error (12-bit modes) EFS -4 -5.4 LSB VADIN = VDDA 27
Temperature sensor slope 1.55 1.62 1.69 mV/°C Across the full temperature range of the device 27
Temperature sensor voltage at 25 °C VTEMP25 706 716 726 mV 25 °C 27
Supply current, high-speed mode IDDHS 200 μA EN = 1, PMODE = 1 28
Supply current, low-speed mode IDDLS 20 μA EN = 1, PMODE = 0 28
Analog input offset voltage VAIO 20 mV 28
Propagation delay, high-speed mode tDHS 20 50 200 ns EN = 1, PMODE = 1 29
Propagation delay, low-speed mode tDLS 80 250 600 ns EN = 1, PMODE = 0 29
Comparator output low VCMPOl 0.5 V 29

CAD (KiCad official)

  • Symbol: MKL04Z32VFK4
  • Footprint: Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm
  • 3D model: QFN-24-EP(4x4) (KiCad packages3D, STEP)
  • 3D model files: mkl04z32vfk4-etched.step / mkl04z32vfk4-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mkl04z32vfk4.step / mkl04z32vfk4.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: NXP Semicon datasheet (49 pp, sha256 95f3d7a94d637c53, retrieved 2026-10-30, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF